1997 AUDI A4 check engine

01-56

Secondary Air Injection (AIR) pump relay -
J299-:

-
Press button.Output Diagnostic Test Mode Secondary Air Injection Relay-J299

Indicated on display
The relay will be actuated and turn on the secondary AIR pump motor
until pressing the button to advance the program sequence.
If the relay is not actuated (does not click) or the motor does not run:
Intake manifold tuning valve -N156- (change-over valve): - Check secondary air injection pump relay -J299- Repair Manual, 2.8
Liter V6 5V Engine Mechanical, Repair Group 26. -
Press button.
Output Diagnostic Test Mode Intake Manifold Changeover Valve-N156

Indicated on display
The valve will click until pressing the button to advance the program
sequence.
If the valve is not actuated (does not click): - Check intake manifold tuning valve -N156- page 24
-116
.
Pa
ge 76 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-63
Display group 000-evaluation Display field
1
Possible malfunction cause
Corrective action
greater than
204
Engine coolant temperature (ECT) sensor -
G62- - Check ECT sensor page 24
-75
less than 170

Engine coolant temperature (ECT) sensor -
G62- - Check ECT sensor page 24
-75


Coolant thermostat faulty (open)
Repair Manual, 2.8 Liter V6 5V Engine Mechanical,
Repair Group 19 - Check thermostat
Display field
2
Possible malfunction cause
Corrective action
greater than
50
Electrical consumers switched on- Switch off electrical consumers

Oxygen Sensor (O2S) control at limit- Check HO2S and O2S control before TWC page 24
-
22

- Check HO2S aging, bank 1, sensor 1 (before TWC)
page 24
-60

- Check HO2S aging, bank 2, sensor 1 (before TWC)
page 24
-63

less than 20

Intake air leaks ("false air")- Check intake air system for leaks page 24
-126Pa
ge 87 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-64

Display field 3
Possible malfunction cause
Corrective action
less than 62
(all-wheel drive)
or
less than 74
(front-wheel drive)
Drive range selected
Throttle valve control module faulty- Move selector lever to "P" or "N" position
- Check idle speed page 24
-16
- Check throttle valve control module page 24
-128

less than 74
(front-wheel drive)
Supply voltage (terminal 15) to terminal 10
of Engine Control Module (ECM) missing - Check supply voltage (terminal 15) to terminal
10 of ECM using applicable wiring diagram
greater than 74
(all-wheel drive)
or
greater less than 86
(front-wheel drive) Closed Throttle Position (CTP) switch open
Throttle valve control module faulty
Intake air leaks ("false air")- Check idle speed page 24
-16
- Check throttle valve control module page 24
-128

- Check intake air system for leaks page 24
-
126

Pa
ge 89 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-65

Display field 4
Possible malfunction cause
Corrective action
less than 0 (Not possible) ---
greater than 12

Adaptation of throttle valve control module to
ECM not complete - Check adaptation of throttle valve control
module page 24
-150

greater than 12

Throttle Position (TP) sensor in throttle valve
control module faulty - Check throttle valve control module page 24
-
128

greater than 12

Throttle valve mechanism sticking
Contamination in intake air ducting near throttle
valve - Check by visual inspection and repair as
necessary
greater than 12
Accelerator pedal cable adjustment
Repair Manual, Fuel Supply System, Repair
Group 20
- Adjust accelerator pedal cable
Display fields 5
+ 6
Possible malfunction cause
Corrective action
less than 118

Intake air leaks ("false air") after throttle valve- Check intake air system for leaks page 24
-
126

greater than
138
Increased engine load- Switch off electrical consumers

Throttle valve mechanism sticking
Contamination in intake air ducting near throttle
valve - Check by visual inspection and repair as
necessary
Pa
ge 90 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1

01-66

Display fields 7 + 8
Possible malfunction cause
Corrective action
less than 77

Mixture too rich-oxygen sensor control
adjusts toward too lean
Oxygen sensor control at limit
Too much fuel vapor from EVAP canister
Fuel pressure regulator faulty, or hose
disconnected - Check HO2S and O2S control before TWC
page 24
-22

- Check fuel pressure regulator page 24
-111
greater than 179

Mixture too lean-oxygen sensor control
adjusts toward too rich
Intake air leaks ("false air")
Fuel injector(s) faulty
Oxygen sensor control at limit- Check HO2S and O2S control before TWC
page 24
-22

- Check intake air system for leaks page 24
-
126

- Check fuel injector(s) page 24
-102


Secondary air system
Output Diagnostic Test Mode (DTM), page 01
-
51
and
Repair Manual, 2.8 Liter V6 5V Engine
Mechanical, Repair Group 26 - Check secondary air system
128

Too little fuel
Oxygen sensor control blocked- Check fuel level in tank
- Check HO2S and O2S control before TWC
page 24
-22

Pa
ge 91 of 97 On Board Dia
gnostic
(OBD
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.1