1996 Volvo 850
Loosen wheel bolts Insert flat end of lug wrench and turn
Pull straight out
Changing a wheel
The spare wheel is located under the carpet on the trunk floor. The jack\
and crank are secured in the
wheel recess.
l Engage the parking brake.
l Put the gear selector in (P)ark (automatic) or in Reverse (manual)\
.
l Remove the wheel cap (where applicable) using the lug wrench in the to\
ol kit.
l With the car still on the ground, use the lug wrench to loosen the wheel\
bolts 1/2 - 1 turn. Turn the
bolts counterclockwise to loosen.
l Fold out the crank handle on the jack by pressing the nob on the handle \
downward. To attach the jack,
refer to the illustration on the following page.
NOTE:
To avoid excessive wear and the necessity of rebalancing, mark and reins\
tall wheels in same location
and position as before removal. To lessen the chance of imbalance, each \
wheel hub is equipped with a
guide stud to ensure that a removed wheel can be reinstalled in its orig\
inal position (as when changing
over to winter tires/wheels).
*The guide stud in not visible from the outside of the wheel on turbo mo\
dels.
file:///K|/ownersdocs/1996/1996_850/96850_601.htm (2 of 5)12/30/2006 9\
:59:39 AMClassic Cars & Cycles www.ClassicCycles.org