1996 TOYOTA TERCEL sensor

S06258
Ohmmeter
P21135
Ohmmeter
S06148
Ohmmeter IG-4
- IGNITIONIGNITION SYSTEM
635 Author
: Date
:
1996 TERCEL (RM440U)
4. INSPCT IGNITION COILS WITH IGNITER
(a) Disconnect the high-tension cords from the ignition coil.
(b) Disconnect ignition coils connector.
(c) Inspect the primary coil resistance.
Using an ohmmeter, measure the resistance between the
positive (+) and negative (-) terminals.
Primary coil resistance :
Cold0.67 - 1.05 W
Hot0.85 - 1.23 W
If the resistance is not as specified, replace the ignition coil.
(d) Remove ignition coils.
(e) Inspect the secondary coil resistance.
Using an ohmmeter, measure the resistance between the
positive (+) and high-tension terminal.
Secondary coil resistance :
Cold9.3 - 16.0 kW
Hot11.7 - 18.8 kW
If the resistance is not as specified, replace the ignition coil.
(f) Reinstall ignition coils
(g) Reconnect ignition coil connectors.
(h) Reconnect high-tension cords from ignition coils.
5. INSPECT CAMSHAFT POSITION SENSOR
(a) Disconnect camshaft position sensor connector.
(b) Inspect camshaft position sensor resistance.
Using an ohmmeter, measure the resistance between ter-
minals.
Resistance:
Cold985 - 1,600 W
Hot1,265 - 1,890 W

P21173
Ohmmeter
- IGNITIONIGNITION SYSTEM
IG-5
636 Author
: Date
:
1996 TERCEL (RM440U)
If the resistance is not as specified, replace the camshaft posi-
tion sensor.
(c) Reconnect camshaft position sensor connector.
6. INSPECT CRANKSHAFT POSITION SENSOR
(a) Disconnect crankshaft position sensor connector.
(b) Inspect crankshaft position sensor resistance.
Using an ohmmeter, measure the resistance between ter-
minals.
Resistance:
Cold985 - 1,600 W
Hot1,265 - 1,890 W
If the resistance is not as specified, replace the crankshaft posi-
tion sensor.
(c) Connect crankshaft position sensor connector.

IG08I-01
S06251
Camshaft Position
SensorCamshaft Position
Sensor Connector
- IGNITIONCAMSHAFT POSITION SENSOR
IG-9
640 Author
: Date
:
1996 TERCEL (RM440U)
CAMSHAFT POSITION SENSOR
COMPONENTS

IG08J-01
IG-10
- IGNITIONCAMSHAFT POSITION SENSOR
1996 TERCEL (RM440U)
REMOVAL
REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and camshaft position sensor.
Torque: 8 N´m (80 kgf´cm, 69 in.´lbf)

IG08K-04
- IGNITIONCAMSHAFT POSITION SENSOR
IG-1 1
1996 TERCEL (RM440U)
INSTALLATION
Installation is in the reverse order of removal (See page IG-10).

IG08L-05
IG-12
- IGNITIONCRANKSHAFT POSITION SENSOR
643 Author
: Date
:
1996 TERCEL (RM440U)
CRANKSHAFT POSITION SENSOR
COMPONENTS

IG08M-04
P21254
Connector Clamp
P21034
- IGNITIONCRANKSHAFT POSITION SENSOR
IG-13
1996 TERCEL (RM440U)
REMOVAL
1. DISCONNECT CRANKSHAFT POSITION SENSOR
CONNECTOR AND CLAMP
2. REMOVE RH ENGINE UNDER COVER
3. REMOVE NO.2 TIMING BELT COVER (See page
EM-12)
4. REMOVE CRANKSHAFT POSITION SENSOR
Remove the bolt and disconnect the crankshaft position sensor.
Torque: 8 N´m (80 kgf´cm, 69 in.´lbf)

IG08N-03
IG-14
- IGNITIONCRANKSHAFT POSITION SENSOR
1996 TERCEL (RM440U)
INSTALLATION
Installation is in the reverse order of removal (See page IG-13).