1996 OLDSMOBILE AURORA child restraint

How to Wear Safety Belts Properly
Adults
This part is only for people of adult size.
Be aware that there are special things
to know about
safety belts and children. And there are different rules
for smaller children and babies. If a child will be riding
in your Aurora, see the part of this manual called
“Children.” Follow those rules for everyone’s
protection.
First, you’ll want to know which restraint systems your
vehicle has.
We’ll start with the driver position.
Driver Position
This part describes the driver’s restraint system.
Lap-Shoulder Belt
The driver has a lap-shoulder belt. The shoulder portion
of the belt has an energy management loop. It is
designed to open and help protect you in certain crashes.
If
it opens, you will see a label on the safety belt that
says to replace the belt. Be sure to do
so. If you don’t,
the safety belt won’t work properly and won’t protect
you in another crash. For more information
on replacing
safety belts after a crash, see “Replacing Safety Belts”
in the Index.
Here’s how to wear the lap-shoulder belt properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see “Seats” in the Index)
so you can sit up straight.
ProCarManuals.com

Rear Safety Belt Comfort Guides for
Zhildren and Small Adults
Rear shoulder belt comfort guides will provide added
safety belt comfort for children who have outgrown
child restraints and for small adults. When installed on
a
shoulder belt, the comfort guide pulls the belt away
from the neck and head.
There is one guide for each outside passenger position in
the rear seat.
To provide added safety belt comfort for
children who have outgrown child restraints and for
smaller adults, the comfort guides may be installed on
the shoulder belts. Here’s how to install a comfort guide
and use the safety belt:
1. Pull the elastic cord out from between the edge of
the seatback and the interior body to remove the
guide from its storage clip.
ProCarManuals.com

Children Smaller Children and Babies
Everyone in a vehicle needs protection! That includes 1
infants and all children smaller than adult size. In fact,
the law in every state in the United States and in every
Canadian province says children
up to some age must be
restrained while in
a vehicle. Smaller children and babies should always
be
restrained in
a child or infant restraint. The
instructions for the restraint will
say whether it is
the right type and size for your child.
A very
young child’s hip bones are
so small that a
regular belt might not stay low on the hips, as it
should. Instead, the belt will likely be over the
child’s abdomen. In
a crash, the belt would apply
force right on the child’s abdomen, which could
cause serious or fatal injuries.
So, be sure that
any child small enough for one is always properly
restrained in
a child or infant restraint.
ProCarManuals.com

U. nr: cl---
Be sure the child restraint is designed to be used in a
vehicle. If it is, it will have a label saying that it meets
Federal Motor Vehicle Safety Standards.
Then follow the instructions for the restraint. You may
find these instructions on the restraint itself or
in a
booklet, or both. These restraints use the belt system in
your vehicle, but the child also has to be secured within
the restraint to help reduce the chance of personal injury.
The instructions that come with the infant or child
restraint will show you how to do that.
1 Put the h&Tai *
Accident statistics show that children are safer if they
are restrained in the rear rather than the front seat. We at
General Motors therefore recommend that you put your
child restraint in the rear seat.
Never put a rear-facing
child restraint in the front passenger seat. Here’s why:
A child in a rear-facing child restraint can be
seriously injured if the right front passenger’s
air bag inflates. This is because the back of
a
rear-facing child restraint would be very close to
the inflating air bag. Always secure
a rear-facing
child restraint in the rear seat.
You may, however, secure
a forward-facing child
restraint in the right front seat. Before you secure
a forward-facing child restraint, always move the
front passenger seat
as far back as it will go. Or,
secure the child restraint in the rear seat.
Wherever you install it, be sure to secure the child
restraint properly.
Keep in mind that an unsecured child restraint can move
around in a collision or sudden stop and injure people
in the vehicle. Be sure to properly secure any child
restraint in your vehicle
-- even when no child is in it.
1-34 -
ProCarManuals.com

Top Strap If your child restraint has a top strap, it should be
anchored.
If you need to have an anchor installed, you
can ask your Aurora retailer to put it in for you. If you
want
to install an anchor yourself, your retailer can tell
you how to do
it.
For cars first sold in Canada, child restraints with a top
strap must be anchored according to Canadian law.
Your retailer can obtain the hardware
kit and install it
for you, or you may install it yourself using the
instructions provided in the kit.
Use the tether hardware kit available from the retailer.
The hardware and installation instructions were
specifically designed for this vehicle.
ProCarManuals.com

Securing a Child Restraint in a Rear
Outside Seat Position
U
You'll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one.
1.
2,
3.
Put the restraint on the seat. Follow the instructions
for the child restraint.
Secure the child in the child restraint as the
instructions say.
Pick up the latch plate, and run the lap and shoulder
portions
of the vehicle's safety belt through or
around the restraint. The child restraint instructions
will
show you how.
r"
4. Tilt the latch plate to adjust the belt if needed.
If the shoulder belt goes in front of the child's face or
neck, put
it behind the child restraint.
ProCarManuals.com

5. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly
if you ever had to.
6. To tighten the belt, pull up on the shoulder belt while
you push down on the child restraint.
7. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, just unbuckle the vehicle's
safety belt and let it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
ProCarManuals.com

Securing a Child Restraint in the Center
Rear
Seat Position
--
You'lI Ge using the lap belt.
See the earlier part about the top strap if the child
restraint has one.
1. Make the belt as long as possible by tilting the latch
plate and pulling
it along the belt.
2. Put the restraint on the seat. Follow the instructions
for the child restraint.
3. Secure the child in the child restraint as the
instructions say.
ProCarManuals.com