1996 Mercury Villager buttons

84
[LG10400(ALL)02/94]
Fuel and Distance Computer
[LG10500(ALL)09/93]
7-1/2 pica art:0040067-B
Fuel and distance computer
[LG10600(ALL)04/95]
The fuel and distance computer has five buttons to operate the
different functions.
% [LG10700(ALL)01/93]
SELECT Ð The SELECT button lets you choose the functions
of the fuel computer. Each time you press the SELECT
button, the computer advances to the next choice on the
menu. After it reaches the last choice on the menu, it returns
to the top of the menu.
[LG10800(ALL)01/93]
RESET Ð The RESET button is used to reset the Average
Economy function. Press the SELECT button until the
Average Economy function is displayed. Then press the
RESET button.
% [LG10900(ALL)04/94]
ENG/MET Ð The ENG/MET button allows you to change
your gauges from English to metric units or from metric to
English units. The displays remain in the units you choose
until you change them again, even after you turn off the
vehicle and start it again.
[LG11000(ALL)04/95]
TRIP/RST Ð The TRIP/RST button is used to reset the trip
odometer mileage. Press the OD/TRIP button until the trip
odometer mileage is displayed. Then press the TRIP/RST
button.
File:05vxlgn.ex
Update:Tue Jun 4 11:35:19 1996

Instrument Panel Controls
91
[IP01400(ALL)01/93]
The controls for the climate control systems, headlamps, clock,
radio, rear window washer and wiper, hazard flasher, power
switch, and speed control are all on the instrument panel.
*
[IP01500(ALL)01/93]
Climate Control Systems
[IP01600(ALL)04/95]
13-1/2 pica
art:0040301-A
Climate control system panel
[IP01700(ALL)01/93]
Function Selector Buttons
[IP01800(ALL)01/93]
There are six function selector buttons: OFF, Mix, Defrost, Panel,
Panel/Floor, and Floor. When you press a function selector
button, the indicator light on the button will illuminate. If your
vehicle is equipped with a rear passenger compartment climate
control system, the instrument panel will also include a rear seat
function selector lever.
[IP01900(ALL)04/94]
n
The OFF button shuts off the air supply to all outlets and
stops all fan operations. Use this setting when driving
through an area where outside air is unpleasant or dusty.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

92
[IP02000(ALL)01/93]
RWARNING
Operating with the function selector button in OFF or in
the recirculated air mode for extended periods of time in
cold weather can result in fog buildup on interior glass
surfaces. This fogging can make it difficult to see the
road for safe driving. Operating the system with outside
air (i.e., with the air intake selector button off) and with
one of the five function selector buttons selected (Defrost,
Mix, Floor, Panel/Floor, or Panel), will help prevent
fogging. Adjust the temperature as necessary for comfort.
[IP02100(ALL)06/95]
n
The Mix (P) button directs approximately equal amounts of
air to the windshield and floor outlets with a small amount
to the side windows.
[IP02200(ALL)06/95]
n
The Defrost (V) button directs air to the windshield with a
small amount going to the floor outlets.
[IP02300(ALL)06/95]
n
The Panel (Q) button directs air to the instrument panel
outlets.
[IP02400(ALL)06/95]
n
The Panel/Floor (S) button directs approximately equal
amounts of air to the instrument panel outlets and the floor
outlets.
[IP02500(ALL)06/95]
n
The Floor (R) button directs most of the system's air
supply to the floor outlets with a small amount going to the
windshield and side window defrosters.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

Instrument Panel Controls
93
[IP02600(ALL)01/93]
Air Outlets
[IP02700(ALL)01/93]
Air intake selector button
[IP02800(ALL)09/93]
The typical air intake selection is outside air. However, for
recirculated air, the air intake selector button may be activated.
When the air intake selector button is activated (indicator light
is on), it prevents the intake of outside air. This is the typical
selection when using the air conditioner (if equipped). It
recirculates interior air for faster cooling. The recirculated air
function also helps to prevent the intake of dusty or unpleasant
air.
[IP02900(ALL)01/93]
There are several air outlets on the instrument panel. There are
side outlets near the driver's window and passenger's window,
two center outlets, floor outlets, and windshield outlets. The
direction and amount of air flow from the center and side
instrument panel outlets can be adjusted for personal comfort.
[IP02950(ALL)04/94]
NOTE: Selection of the recirculated air mode under cold and
humid conditions may result in window fogging due
to entrapped humidity within the vehicle. To
counteract this circumstance, switch to the Defrost
mode and set fan speed to 3 or 4. Adjust air
temperature to a ªwarmº instead of ªhotº setting.
[IP03000(ALL)06/95]
Heating Only System (Without air conditioning)
[IP03100(ALL)01/93]
You can heat and ventilate the inside of your vehicle, or defrost
the windshield with the function selector buttons, the fan speed
knob and the temperature control knob.
[IP03200(ALL)01/93]
An additional push-on/push-off air intake selector button
provides for the selection of recirculated inside air (button
lighted) or outside air (button not lighted).
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

96
[IP04900(ALL)01/93]
n
Remove any snow, ice, or leaves from the area below the
windshield on the outside of your vehicle. They could block
the air intake.
*
[IP05000(ALL)06/94]
Heating and Air Conditioning System (If equipped)
*
[IP05100(ALL)06/95]
Turning on the heat
[IP05200(ALL)01/93]
You can heat the inside of your vehicle and defrost the
windshield using the function selector buttons located in the
control assembly in the instrument panel.
[IP05300(ALL)07/95]
The six function selector buttons are: OFF, Mix (P), Defrost
(V) Panel (Q), Panel/Floor (S), and Floor (R). If your
vehicle is equipped with a rear seat climate control system, the
instrument panel will also include a rear seat climate control
lever. To turn on the rear passenger compartment control
system, select REAR, 1, 2, 3, or 4. With the lever set to REAR,
rear seat passengers will have control of rear fan speed on the
rear seat climate control panel. Positions 1, 2, 3, or 4 will control
rear fan speed from the front control panel. The temperature of
the air from the rear system is controlled by the rear passenger
compartment climate control system.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

Instrument Panel Controls
97
[IP05400(ALL)04/95]
13-1/2 pica
art:0040301-A
Heating and air conditioning climate control system panel
[IP05500(ALL)09/93]
The standard heating system and the heating portion of the
heating and air conditioning system are essentially identical.
There is one exception, however; the air conditioning
compressor may automatically engage when the Defrost position
is selected to aid in defogging and defrosting the inside glass.
When Defrost is selected, the A/C compressor will
automatically operate when the outside temperature is above
approximately40ÊF (4ÊC),whether or not the A/C button is
illuminated. Manual selection and illumination of the A/C
button in defrost mode does not override the automatic
compressor operation discussed above. Refer to the heating
system operating instructions covered previously for a more
detailed explanation of heating system operation.
[IP05600(ALL)01/93]
Turning on the air conditioner
*
[IP05700(ALL)09/93]
To cool your vehicle quickly in warm weather:
[IP05800(ALL)01/93]1.
Press one of the function selector buttons (typically Panel,
but Panel/Floor, Floor or Mix can be selected).
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

Instrument Panel Controls
99
*
[IP06800(ALL)07/93]
Cooling your vehicle with outside air
[IP06900(ALL)01/93]
Cooling your vehicle with air conditioned outside air is quieter
but less economical than using recirculated air. It also has less
cooling capacity.
*
[IP07000(ALL)07/93]
To cool your vehicle using outside air:
[IP07100(ALL)04/95]1.
Turn the air intake selector button off (the outside air
position). The air conditioning unit directs outside air
through the instrument panel registers.
[IP07200(ALL)01/93]2.
Press one of the function selector buttons.
[IP07300(ALL)01/93]3.
Press the A/C button. The indicator light on the A/C button
will illuminate.
[IP07400(ALL)01/93]4.
Turn the temperature control knob to COOL.
[IP07500(ALL)01/93]5.
Turn the fan speed knob to the position of your choice.
[IP07600(ALL)04/95]6.
Make sure the registers in the instrument panel are open.
[IP07700(ALL)01/93]
During periods of high humidity, vapor may be emitted from
the air outlets when using the A/C with outside air. Correct
this by switching to recirculated air with the A/C button.
[IP07800(ALL)01/93]
Ventilating your vehicle with outside air
[IP07900(ALL)01/93]
In mild weather, you can ventilate your vehicle with outside air.
If the outside temperature is less than70ÊF (21ÊC), you can add
cool air to your vehicle without using air conditioning. You will
get better fuel economy this way.
[IP08000(ALL)01/93]
The procedure for ventilating your vehicle with the standard
heating system or with the air conditioning system is the same.
Refer to the previous section for instructions on how to ventilate
with outside air.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

Instrument Panel Controls
103
[IP10305(ALL)06/95]
Automatic Temperature Control System
[IP10310(ALL)06/95]
The control for your Automatic Temperature Control (ATC) is
located at the center of the instrument panel above the radio.
The ATC operates only when the ignition key is turned to the
ON position and the vehicle is running.
[IP10315(ALL)06/95]
17-1/2 pica art:0040072-E[IP10320(ALL)06/95]
To turn the ATC on, push the AUTOMATIC button or any of
the five airflow function selector buttons:P,V,Q,S,
orR.
[IP10323(ALL)06/95]
To turn the ATC off, press the OFF button.
[IP10325(ALL)06/95]
To change the temperature in the display window, select any
temperature between65ÊF (18ÊC) and 85ÊF (29ÊC)using the
NTEMPMbutton.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996