1996 Mercury Villager lock

287
Accessories
[AC00500(ALL)04/95]
Ford Accessories for Your Villager
*
[AC00520(ALL)04/95]
Ford has many fine products available from your dealer to clean
your vehicle and protect its finishes. For best results, use the
following, or products of equivalent quality:
*
[AC00540(ALL)07/95]
twelve pica
chart:0032382-A
[AC00600(ALL)04/94]
Many accessories for your vehicle are available through your
local authorized dealer. These accessories have been designed to
meet your needs and are custom-designed to complement the
style and aerodynamics of your vehicle. Some of the available
accessories are listed here.
*
[AC00700(ALL)01/93]
Safety, Comfort, and Convenience
*
[AC00800(ALL)06/93]
Comfort and Convenience
[AC00900(ALL)04/95]
Air Conditioning
Engine Block Heater
Remote Keyless Entry
File:14vxacn.ex
Update:Mon Jun 3 08:32:34 1996

288
*
[AC01000(ALL)01/93]
Protection and Appearance Equipment
[AC01100(ALL)04/95]
Aero Running Boards
Carpeted Floor Mats
Door Edge Guards
Cleaners, Waxes and Polishes
Front End Cover
Front End Mini Cover
Lubricants and Oils
Molded Running Boards
Side Window Shields
Soft Luggage Cover
[AC01200(ALL)01/93]
Protection and Appearance Equipment (Continued)
[AC01300(ALL)04/94]
Styled Wheel Protector Locks
Super Seal Fabric Protector (U.S. Only)
Super Seal Rustproofing (U.S. Only)
Super Seal Undercoating (U.S. Only)
Touch-Up Paints
Flat Splash Guards
*
[AC01400(ALL)01/93]
Safety Equipment
*
[AC01500(ALL)11/93]
Vehicle Security Systems
File:14vxacn.ex
Update:Mon Jun 3 08:32:34 1996

302
%*
[SV05025(ALL)04/95]
Cleaning the Engine
*
[SV05050(ALL)04/95]
A clean engine is more efficient because a buildup of grease and
dirt acts as an insulator, keeping the engine warmer than
normal.
*
[SV05075(ALL)07/95]
n
Extreme care must be used if a power washer is used to
clean the engine. The high pressure fluid could penetrate
sealed parts and assemblies causing damage or malfunctions.
*
[SV05100(ALL)08/95]
n
In order to avoid possible cracking of the engine block or
fuel injection pump, do not spray a hot engine or injection
pump with cold water.
*
[SV05125(ALL)07/95]
n
The alternator, distributor and air intake must be covered.
Covering these components will help prevent water damage.
*
[SV05150(ALL)04/95]
n
Never wash or rinse the engine while it is running. Water
getting into the engine may cause internal damage.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
305
*
[SV07160(ALL)06/95]4.
Replace the fuel cap tightly when you are finished. Turn it
clockwise until you hear at least three clicks. The ratcheting
mechanism allows the fuel cap to be sealed without
overtightening.
*
[SV07170(ALL)10/95]5.
Push the fuel door closed.
%*
[SV07200(ALL)06/95]
Choosing the Right Fuel
[SV07300(ALL)05/96]
Use only UNLEADED FUEL. The use of leaded fuel is
prohibited by law and could damage your vehicle. The damage
may not be covered by your warranty.
[SV07350(ALL)05/96]
Your vehicle was not designed to use fuel containing
manganese-based additives such as MMT. Additionally, vehicles
certified to California emission standards (indicated on the
underhood vehicle Emissions Control Information label) are
designed to operate on California reformulated gasolines. If
California reformulated gasoline is not available when you
refuel, your vehicle can be operated on non-California fuels.
However, even though your engine will perform adequately on
other gasolines, the performance of the emission control devices
and systems may be adversely affected. Repair of damage
casued by using a fuel that your vehicle was not designed for
may not be covered by your warranty.
[SV07370(ALL)05/96]
Octane recommendation
[SV08000(ALL)05/96]
Your vehicle is designed to use regular gasoline with an
(R+M)/2 octane rating of 87. We do not recommend gasolines
labeled as ªregularº in high altitude areas that are sold with
octane ratings of 86 or even less.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Servicing Your Villager
321
*
[SV22700(ALL)03/01]
Wiper blade replacement
*
[SV22800(ALL)01/95]
If the wipers still do not work properly after you clean them,
you may need to replace the wiper blade assembly. When
replacing the wiper blade assembly always use a Motorcraft part
or equivalent.
*
[SV22900(ALL)10/93]
To replace the wiper blades:
*
[SV23000(ALL)06/95]1.
Pull the wiper arm away from the windshield and into the
lock position.
[SV23100(ALL)04/95]2.
Turn the blade at an angle from the wiper arm. Push the
lock pin to release the blade and pull the wiper blade down
toward the windshield to remove it from the arm.
*
[SV23200(ALL)03/94]3.
Attach a new wiper blade to the wiper arm and press it into
place until you hear it click.
[SV23300(ALL)06/95]
13-1/2 pica
art:0040235-B
Replacing the wiper blades
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

350
[SV40600(ALL)09/93]
13-1/2 pica
art:0040222-B
The headlamp bulb assembly
[SV40700(ALL)01/93]3.
Remove the bulb retaining ring by turning it
counterclockwise 1/8 of a turn to free it from the socket.
Then slide the ring off the plastic base. Keep the ring.You
must use it again to hold the new bulb in place.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

352
[SV41200(ALL)09/93]
17-1/2 pica
art:0040212-A
Headlamp bulb replacement
*
[SV41300(ALL)03/95]
Installing the headlamp bulb
*
[SV41400(ALL)01/93]1.
With the flat side of the bulb's plastic base facing upward,
insert the glass end of the bulb into the socket. You may
need to turn the bulb left or right to line up the grooves in
the plastic base with the tabs in the socket. When the
grooves are aligned, push the bulb into the socket until the
plastic base contacts the rear of the socket. Do not touch the
glass with your fingers.
[SV41500(ALL)01/93]2.
Slip the retaining ring over the plastic base until it contacts
the rear of the socket. Lock the ring into the socket by
rotating it until you feel a ªstop.º
*
[SV41600(ALL)01/93]3.
Push the electrical connector into the rear of the plastic base
until it snaps, locking it into place.
File:15vxsvn.ex
Update:Wed Jun 5 12:25:18 1996

Index
385
A
ABS warning light (see Anti-lock brake system)...... 70
Accessory position on the ignition............. 57
Additives, engine oil.................. 310
Air bag supplemental restraint system
and child safety seats............... 25,32
description.................... 23,26
driver air bag................... 23,26
indicator light..................... 71
operation....................... 26
passenger air bag................... 26
proper seating.................... 24
service and information labels............. 26
tone generator.................... 30
wearing safety belts.................. 24
Air cleaner filter, location............... 300
Antenna, radio (see Electronic sound system). . . 121, 205, 226
Antifreeze (see Engine coolant)............. 314
Anti-lock brake system (ABS)
description..................... 234
noise........................ 235
see also Brake.................... 234
warning light..................... 70
Anti-theft lug nuts and key............... 267
Appeals (see Dispute settlement board)......... 278
Assistance (see Customer assistance)........... 275
Audio system (see Electronic sound system)....... 205
File:vxixn.ex
Update:Fri Jun 7 09:28:47 1996