1996 Mercury Sable seats

33
*
[SR20650(ALL)02/95]
RWARNING
When possible, put children in the
rear seat of your vehicle. Accident
statistics suggest that children are
safer when properly restrained in the
rear seating positions than in the
front seating positions.
*
[SR20700(ALL)01/95]
RWARNING
When using any infant or child
restraint system, it is important that
you follow the instructions and
warnings provided by the
manufacturer concerning its
installation and use. Failure to follow
each of the restraint manufacturer's
instructions could increase the risk or
severity of an injury in the event of
a collision or sudden stop.
*
[SR20900(ALL)01/95]
Safety belts and seats can become hot
in a vehicle that has been closed up
in sunny weather; they could burn a
small child. Check seat covers and
buckles before you place a child
anywhere near them.
*
[SR21000(ALL)01/95]
RWARNING
Never leave a child unattended in
your vehicle. Always remove the key
from the ignition and take it with
you.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

34 %
*
[SR22000(ALL)01/95]
Safety Seats for Children
*
[SR22100(ALL)01/95]
Use a safety seat that is recommended for the
size and weight of the child. Always follow the
safety seat manufacturer's instructions when
installing and using the safety seat.
[SR22125(ALL)04/95]
Ford recommends the use of a child safety seat
having a top tether strap. Install the child safety
seat in a seating position which is capable of
providing a tether anchorage. For more
information on top tether straps seeAttaching
Safety Seats With Tether Strapsin this chapter.
*
[SR22150(ALL)02/95]
When installing a child safety seat, be sure to
use the correct safety belt buckle for that seating
position, and make sure the tongue is securely
fastened in the buckle.
%*
[SR22400(ALL)01/95]
RWARNING
Your vehicle is equipped with a right
front passenger air bag.
REAR-FACING INFANT SEATS
SHOULD NEVER BE USED IN THE
FRONT SEAT, BECAUSE THE
FORCE OF THE RAPIDLY
INFLATING PASSENGER AIR BAG
COULD PUSH THE TOP OF THE
REAR-FACING SEAT AGAINST THE
VEHICLE SEATBACK, OR CENTER
CONSOLE (IF SO EQUIPPED), OR
CENTER ARMRESTS (IF SO
EQUIPPED). ALWAYS PLACE
REAR-FACING INFANT SEATS IN
THE REAR SEAT. When using
forward-facing child seats in the front
seat, always move the passenger seat
as far back from the instrument panel
as possible. Failure to follow these
warnings could result in injury to the
child.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

35
*
[SR22500(ALL)01/95]
RWARNING
All child restraint systems are
designed to be secured in vehicle
seats by lap belts or by the lap
portion of a lap-shoulder belt. If you
do not properly secure the safety seat
to the vehicle, the risk is greater that
a child, occupying the seat during a
collision or sudden stop, will be
injured. An unsecured safety seat
could also injure other passengers in
the vehicle.
*
[SR22600(ALL)01/95]
RWARNING
Carefully follow all of the
manufacturer's instructions that come
with the safety seat that you put in
your vehicle. Make sure that the
shoulder belt (if provided at the
seating position where the safety seat
is being used) does not cross or rest
in front of the child's face or neck. If
you do not install and use the safety
seat properly, the child may be
injured in a sudden stop or collision.
[SR22700(ALL)04/95]
RWARNING
If you have a wagon, never use child
safety seats in the third seat. Safety
seats for children are not intended
for use in rear facing seats.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

36
*
[SR22720(ALL)01/95]
RWARNING
Always keep the buckle release
button pointing upward and away
from the child seat, with the tongue
between the child seat and the
release button as shown in the
following illustration. Failure to
follow these instructions could result
in accidental unbuckling of the safety
belt if the child safety seat hits the
release button. Release of the safety
belt could result in serious injuries.
[SR22740(ALL)11/94]
half page art:0011286-A
Safety belt buckle placement for child seats
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

37 %
*
[SR22750(ALL)11/94]
Installing Child Safety Seats in the Front
Passenger Seat and Outer Rear Seating
Positions
[SR22800(ALL)12/94]
Your vehicle is equipped with a dual locking
mode retractor on the shoulder belt portion of
the combination lap/shoulder safety belt for the
front passenger seat and rear outer seats. The
automatic locking modemust be usedwhen
installing a child seat or infant carrier in the
front passenger seat or rear outer seats.
*
[SR22850(ALL)11/94]
RWARNING
Never install a rear-facing child seat
or infant carrier in the right front
passenger seat.
*
[SR22901(ALL)03/95]
If you choose to install a child safety seat in the
front seating position, move vehicle seat as far
back as possible.
[SR22950(ALL)12/94]
1. Position the child seat on the passenger seat
of the vehicle.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

46
*
[SR24750(ALL)01/95]
RWARNING
When using any infant or child
restraint system, it is important that
you follow the instructions and
warnings provided by the
manufacturer concerning its
installation and use. Failure to follow
each of the restraint manufacturer's
instructions could increase the risk or
severity of an injury in the event of
a collision or sudden stop.
%*
[SR24800(ALL)04/95]
Attaching Safety Seats With Tether Straps
*
[SR24950(ALL)04/95]
Some manufacturers make safety seats that
include a tether strap that goes over the back of
the vehicle seat and attaches to an anchoring
point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of
your child safety seat for information about
ordering a tether strap.
*
[SR25050(ALL)04/95]
Front Seats
*
[SR25150(ALL)04/95]
To install a tether from a child safety seat in the
front seat:
*
[SR25250(ALL)04/95]
1. Buckle the lap/shoulder belt (in the seat
directly behind the front passenger seat in
which the child safety seat will be installed).
*
[SR25350(ALL)04/95]
2. Pull all the stored belt out of the rear seat
retractor to switch the retractor to automatic
locking mode.
*
[SR25375(ALL)04/95]
3. Let the retractor wind up the slack from the
lap/shoulder belt.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

47
*
[SR25425(ALL)04/95]
4. Install the child safety seat in the front seat.
Refer to the previous section onInstalling
Safety Seats. Hook the tether strap hook
around the webbing near the center of the
shoulder portion of the locked lap/shoulder
belt.
*
[SR25525(ALL)04/95]
5. Tighten the tether strap.
*
[SR25550(ALL)04/95]
Rear Seats
*
[SR25600(ALL)04/95]
If you use a tethered safety seat on one of the
rear seats, you can anchor the strap to the
appropriate tether anchor directly behind that
seat position.
[SR25725(ALL)04/95]
Tether anchorage hardware
[SR25800(ALL)04/95]
Attachment holes (at each rear outboard seating
position) have been provided in your vehicle to
attach anchor hardware, if required. Kits can be
obtained at no charge from any Ford or
Lincoln-Mercury dealer.
[SR26100(ALL)04/95]
Be sure to follow the child safety seat
manufacturer's instructions.
*
[SR26500(ALL)04/95]
RWARNING
Tighten the anchor according to
specifications. Otherwise, the safety
seat may not be properly secured and
the child may be injured in a sudden
stop or collision.
[SR26600(ALL)04/95]
In a station wagon, you simply attach the tether
strap to one of the anchors that are already
installed for you.
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995

58 [SR28850(ALL)04/95]To stow the built-in child seat:
*
[SR28900(ALL)03/95]
1. Return the child seat cushion to the upright
position.
[SR28950(ALL)04/95]
2. Press firmly in the center and top of the
child seat to place it in the stowed position.
[SR28960(ALL)12/95]
3. Reattach the flap on the child seat to the top
of the seatback.
[SR29000(ALL)03/95]
The seat can now be used by an adult or the
seatback can be folded down.
[SR29025(ALL)04/95]
NOTE: The seatback cannot be folded down
unless the child seat is fully stowed.
*
[SR29050(ALL)03/95]
Inspection after a collision
*
[SR29100(ALL)03/95]
RWARNING
All built-in child restraints, including
seats, buckles, retractors, seat latches,
interlocks, and attaching hardware
should be inspected by a qualified
Dealer technician after any collision.
If the child seat was in use during a
collision, Ford recommends replacing
it. However, if the collision was
minor and a qualified technician
finds that the child restraints do not
show damage and continue to
operate properly, they do not need to
be replaced. Built-in child seats not
in use during a collision should also
be inspected and replaced if either
damage or improper operation is
noted.
[SR29150(ALL)04/95]
Built-in child seat maintenance
*
[SR29200(ALL)03/95]
Regularly inspect the lap and shoulder belts
system of your child seat. See your Ford dealer
if the shoulder belt webbing is frayed, or if the
File:fcsrs.ex
Update:Wed Dec 20 09:34:02 1995