1996 Lexus LS400 ECU

COMFORT ADJUSTMENT
64
INSIDE REAR VIEW MIRROR
Pushing the switch changes the mode between
ªAUTOº and ªDAYº.
The indicator comes on when the ªAUTOº mode is selected.
ªDAYº mode: The mirror surface is normal.
ªAUTOº mode: If the mirror detects light from the
headlights of the vehicle behind you, the mirror surface
darkens slightly to reduce the reflected light.
When the inside rear view mirror surface changes, the
outside rear view mirror surfaces will also become darker.
When the ignition key is inserted and turned on, the inside
rear view mirror always turns on in the ªAUTOº mode.
Adjust it before driving so that the rear view is the best.
When the outside air temperature is low, it may take a little
longer for the mirror to darken in response to the detection
of headlights.
SEAT BELTS
Seat belt precautions
Lexus recommends that the driver and passengers in the
vehicle be properly restrained at all times with the seat belts
provided. Failure to do so could increase the chance of injury
and/or the severity of injury in accidents.
Baby or small child. Use a child restraint system which fits
your vehicle. See ªChild restraintº for details.
Child. If a child is too large for a child restraint system, the
child should sit in the rear seat and must be restrained using
the vehicle's seat belts. According to accident statistics, the
child is safer when properly restrained in the rear seat than
in the front seat. Do not allow the child to stand up or kneel
on either rear or front seats. If the shoulder belt falls across
the child's neck or face, have the child sit slightly closer to the
buckle so that the belt lays across the shoulder.
Pregnant woman. Lexus recommends the use of a seat
belt. Ask your doctor for specific recommendations. The lap
belt should be worn securely and as low as possible over the
hips and not on the waist.
Injured person. Lexus recommends the use of a seat belt.
Depending on the injury, first check with your doctor for
specific recommendations.

COMFORT ADJUSTMENT
66
Fastening front and rear seat belts
Adjust the seat as needed and sit up straight and well
back in the seat. To fasten your belt, pull it out of the
retractor and insert the tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size and
the seat position.
The retractor will lock the belt during a sudden stop or on
impact. It also may lock if you lean forward too quickly. A
slow, easy motion will allow the belt to extend, and you can
move around freely.When a passenger's shoulder belt is completely extended
and is then retracted even slightly, the belt is locked in that
position and cannot be extended. This feature is used to hold
the child restraint system securely. (For details, see ªChild
restraintº on page 78.) To free the belt again, fully retract the
belt and then pull the belt out once more.
If the seat belt cannot be pulled out of the retractor, firmly pull
the belt and release it. You will then be able to smoothly pull
the belt out of the retractor.
CAUTION!

After inserting the tab, make sure the tab and
buckle are locked and that the belt is not twisted.
Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab and
buckle.
If the seat belt does not function normally,
immediately contact your Lexus dealer.

COMFORT ADJUSTMENT
68
Front seat belts only
Power type: To adjust the shoulder anchor position, press
the upper or lower part of the control switch located on the
door. When the switch is released, the shoulder anchor will
stop at that position.
CAUTION!
Always make sure the shoulder belt is positioned
across the center of your shoulder. The belt should
be kept away from your neck, but not falling off your
shoulder. Failure to do so could reduce the amount
of protection in an accident and increase the chance
of injury.
To release the belt, press the buckle release button and
allow the belt to retract.
If the belt does not retract smoothly, pull it out and check for
kinks or twists. Then make sure it remains untwisted as it
retracts.
Seat belt extender
If the front or rear outside seat belts cannot be fastened
securely because it is not long enough, a personalized seat
belt extender is available from your Lexus dealer free of
charge.
Please contact your local Lexus dealer so that the dealer can
order the proper required length for the extender. Bring the
heaviest coat you expect to wear for proper measurement
and selection of length. Additional ordering information is
available at your Lexus dealer.

COMFORT ADJUSTMENT
74Deployment of the airbags happen in a fraction of a second,
so the airbags must inflate with considerable force. While the
system is designed to reduce serious injuries, it may also
cause minor burns or abrasions and swellings.
Parts of the airbag module (steering wheel hub, dashboard)
may be hot for several minutes, but the airbags themselves
will not be hot. The airbags are designed to inflate only once.
A crash severe enough to inflate the airbags may break the
windshield as the vehicle buckles. In vehicles with a front
passenger airbag the windshield may also be damaged by
absorbing some of the force of the inflating airbag.
CAUTION!

The SRS airbag system is designed only as a
supplement to the primary protection of the seat
belt systems of the driver and front passenger. The
front seat occupants are particularly susceptible to
injury if they do not wear their seat belts; when
sudden braking or a collision occurs, they may be
thrown forward. To obtain further protection in an
accident, the driver and all passengers in the
vehicle should always wear their seat belts when
driving. For instructions and precautions
concerning the seat belt system, see ªSeat beltsº
on page 64.
A baby or small child who is too small to use a seat
belt should be properly secured in a rear seat using
a child restraint system.
Do not use a rear±facing child restraint system in
the front seat because the force of the rapid
inflation of the passenger airbag may cause severe
injury to the child. Vehicles with a passenger airbag
display a caution label on the passenger side
instrument panel as shown above to remind you
not to install a rear±facing child restraint system on
the front seat.

COMFORT ADJUSTMENT
79 When installing a child restraint system, follow the
instructions provided by the manufacturer of the system.
General directions are also provided under the following
illustrations.
CAUTION!
After installing the child restraint system, make sure
it is secured in place. If it is not restrained securely,
it may cause injury to the child in the event of a
sudden stop or accident.
When not using the child restraint system, keep it secured
with the seat belt or place it in the trunk or somewhere other
than in the passenger compartment. This will prevent it
injuring passengers in the event of a sudden stop or
accident.Top strap anchors and locations
Your vehicle has anchors for securing the top strap of a child
restraint system. The anchor nuts are welded beneath the
sheet metal to permit installation of an anchor bracket for a
child restraint system.
To install an anchor bracket, use an 8 mm X 30 mm X 1.25
mm coarse thread metric bolt and a 15 mm (0.6 in.) spacer.
Note that the bolts accompanying many child restraint
systems are not metric. You can damage the anchor nuts on
your vehicle if you force bolts with different thread into the
anchor nuts.

COMFORT ADJUSTMENT
82
CAUTION!

After inserting the tab, make sure the tab and buckle
are locked.
Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab and
buckle.
If the seat belt does not function normally,
immediately contact your Lexus dealer.
2. Fully extend the shoulder belt to put it in the lock mode.
3. Place the shoulder belt between the vehicle seatback
and the child restraint system and allow it to retract. To hold
the child restraint system securely, let the shoulder belt
retract as far as it will go while firmly pushing down the child
restraint system.
4. If your child restraint system requires the use of a top
strap, latch the hook onto the anchor bracket and tighten the
top strap.

COMFORT ADJUSTMENT
83
CAUTION!
Make sure the seat belt is securely locked. Also make
sure the child restraint system is secure by pushing
and pulling it in different directions.
5. To remove the child restraint system, press the
buckle±release button and allow the belt to retract. Unhook
the top strap.

COMFORT ADJUSTMENT
85
1. Fasten the lap and shoulder belt over the child restraint
system following the instructions provided by its
manufacturer. Keep the lap portion of the belt tight.
CAUTION!

After inserting the tab, make sure the tab and
buckle are locked.
Do not insert coins, clips, etc. in the buckle as this
may prevent you from properly latching the tab and
buckle.
If the seat belt does not function normally,
immediately contact your Lexus dealer.
2. Fully extend the shoulder belt to put it in the lock mode.
3. Place the shoulder belt between the vehicle seatback
and child restraint system and allow it to retract. To hold the
child restraint system securely, let the shoulder belt retract
as far as it will go while firmly pushing down the child restraint
system.