COMFORT ADJUSTMENT
87
DRIVING POSITION MEMORY
SYSTEM
The micro computer can memorize the position of the
driver's seat, the height of the shoulder belt anchor of the
driver's seat belt, and the positions of the tilt and telescopic
steering, and outside rear view mirrors. Two different driving
position profiles can be entered into the computer's memory.
Recording a driving position in the computer's memory can
only be done when the ignition key is in the ªONº position and
the shift lever is in the ªPº position.
Setting a driving position
1. Adjust the driver's seat, driver's shoulder belt
anchor, tilt and telescopic steering and outside rear
view mirrors to the desired position.
2. While pushing the ªSETº button, push button ª1º or
ª2º until the signal beeps.
The beep sound means that the positions are recorded in the
computer 's memory.
By repeating these two steps and pressing the remaining
button, the driving position for another driver can be
recorded.
To set a new memorized position, select the desired position
and perform step 2. The previous memory will be erased and
the new position will be set.
To make only slight changes to an already memorized
position, the easiest way is to first activate the memorized
position, then make the desired changes and perform step
2 above.
