Page 3 of 298
![FORD PROBE 1996 2.G Owners Manual *
[PI01700(ALL)05/95]
Table of ContentsIntroductory Information............................... 1
Safety Restraints.............................................. 9
Starting Your Probe.................. FORD PROBE 1996 2.G Owners Manual *
[PI01700(ALL)05/95]
Table of ContentsIntroductory Information............................... 1
Safety Restraints.............................................. 9
Starting Your Probe..................](/manual-img/11/5320/w960_5320-2.png)
*
[PI01700(ALL)05/95]
Table of ContentsIntroductory Information............................... 1
Safety Restraints.............................................. 9
Starting Your Probe...................................... 37
Warning Lights and Gauges....................... 51
Instrument Panel Controls.......................... 63
Steering Column Controls.......................... 77
Features............................................................ 95
Electronic Sound Systems......................... 121
Driving Your Probe.................................... 147
Roadside Emergencies................................ 169
Customer Assistance................................... 185
Accessories.................................................... 197
Servicing Your Probe................................. 203
Quick Index
.........................................
281
Index................................................................ 291
Service Station Information....................... 308
File:prpip.ex
Update:Fri Jun 23 19:39:31 1995
Page 11 of 298
![FORD PROBE 1996 2.G Owners Manual 9
Safety Restraints
*
[SR00500(ALL)04/95]
Important Safety Belt Information
*
[SR00600(ALL)03/95]
The use of safety belts helps to restrain you and
your passengers in case of a collision. In most
stat FORD PROBE 1996 2.G Owners Manual 9
Safety Restraints
*
[SR00500(ALL)04/95]
Important Safety Belt Information
*
[SR00600(ALL)03/95]
The use of safety belts helps to restrain you and
your passengers in case of a collision. In most
stat](/manual-img/11/5320/w960_5320-10.png)
9
Safety Restraints
*
[SR00500(ALL)04/95]
Important Safety Belt Information
*
[SR00600(ALL)03/95]
The use of safety belts helps to restrain you and
your passengers in case of a collision. In most
states and in Canada the law requires their use.
*
[SR00700(ALL)01/95]
Safety belts provide best restraint when:
*
[SR00800(ALL)01/95]
q
the seatback is upright
*
[SR00900(ALL)01/95]
q
the occupant is sitting upright (not slouched)
*
[SR01000(ALL)01/95]
q
the lap belt is snug and low on the hips
*
[SR01100(ALL)01/95]
q
the shoulder belt is snug against the chest
*
[SR01200(ALL)01/95]
q
the knees are straight forward
[SR01975(ALL)04/95]
To help you remember to fasten your safety belt,
a warning light may come on and a chime may
sound. SeeSafety Belt Warning Light/Chimein the
Warning Lights and Gaugeschapter.
*
[SR02000(ALL)01/95]
See the following sections in this chapter for
directions on how to properly use these safety
belts. Also seeSafety Restraints for Childrenin this
chapter for special instructions about using
safety belts for children.
%*
[SR02100(ALL)05/95]
RWARNING
Make sure that you and your passengers
wear safety belts. Always drive and ride
with your seatback upright and the lap
belt snug and low across the hips.
File:prsrp.ex
Update:Fri Jun 23 19:39:12 1995
Page 40 of 298
![FORD PROBE 1996 2.G Owners Manual 38
*
[ST02400(ALL)05/95]
ON allows you to test your vehicles warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON posit FORD PROBE 1996 2.G Owners Manual 38
*
[ST02400(ALL)05/95]
ON allows you to test your vehicles warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON posit](/manual-img/11/5320/w960_5320-39.png)
38
*
[ST02400(ALL)05/95]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. The key returns to the ON position once
the engine is started and remains in this position
while the engine runs.
*
[ST02500(ALL)03/95]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake warning light.
*
[ST02505(ALL)09/93]
Shift-lock System
*
[ST02510(ALL)09/93]
For your safety, the optional automatic transaxle
has the shift-lock system, which prevents shifting
the transaxle out of the P (Park) position without
depressing the brake pedal when the ignition
switch is in the ON position.
*
[ST02515(ALL)07/89]
To shift the transaxle out of the P (Park)
position:
*
[ST02521(ALL)05/90]
1. Depress and hold the brake pedal.
*
[ST02526(ALL)11/93]
2. Start the engine.
[ST02528(ALL)01/94]
3. Push in the thumb button and move the
shift selector lever.
[ST02530(ALL)06/93]
4. SeeShift Lock Emergency Overridein this
section for more information.
File:prstp.ex
Update:Fri Jun 23 19:38:23 1995
Page 45 of 298
![FORD PROBE 1996 2.G Owners Manual 43
*
[ST05700(ALL)03/95]
Testing the Warning Lights
*
[ST05800(ALL)03/95]
Before you start your vehicle, you should test
the warning lights on the instrument panel to
make sure that they work. Refer t FORD PROBE 1996 2.G Owners Manual 43
*
[ST05700(ALL)03/95]
Testing the Warning Lights
*
[ST05800(ALL)03/95]
Before you start your vehicle, you should test
the warning lights on the instrument panel to
make sure that they work. Refer t](/manual-img/11/5320/w960_5320-44.png)
43
*
[ST05700(ALL)03/95]
Testing the Warning Lights
*
[ST05800(ALL)03/95]
Before you start your vehicle, you should test
the warning lights on the instrument panel to
make sure that they work. Refer to theWarning
Lights and Gaugeschapter.
*
[ST06000(ALL)02/95]
Starting Your Engine
*
[ST06100(ALL)02/95]
To start your engine:
*
[ST06300(ALL)05/95]
1. Follow the steps underPreparing to Start
Your Vehicleat the beginning of this section.
*
[ST06320(ALL)03/95]
2. Keep your foot on the brake pedal and turn
the ignition key to the ON position.
*
[ST06330(ALL)03/95]
3. DO NOT depress the accelerator pedal when
starting your engine. DO NOT use the
accelerator while the vehicle is parked.
*
[ST06340(ALL)02/95]
4. Turn the key to the START position
(cranking) until the engine starts. Allow the
key to return to the ON position after the
engine has started.
*
[ST06400(ALL)02/95]
If you have difficulty in turning the key,
rotate the steering wheel slightly because it
may be binding.
%*
[ST06430(ALL)04/95]
For a cold engine:
*
[ST06440(ALL)05/95]
q
At temperatures10ÊF (-12ÊC) andbelow:If
the engine does not start infifteen (15)
secondson the first try, turn the key to OFF,
wait approximately ten (10) seconds so you
do not flood the engine, then try again.
*
[ST06450(ALL)04/95]
q
At temperaturesabove10ÊF(-12ÊC):If the
engine does not start infive (5) secondson
the first try, turn the key to OFF, wait
approximately ten (10) seconds so you do not
flood the engine, then try again.
File:prstp.ex
Update:Fri Jun 23 19:38:23 1995
Page 52 of 298
51
Warning Lights and
Gauges
*
[LG00600(ALL)01/95]
The instrument panel (dashboard) on your
vehicle is divided into several different sections.
The illustrations on the following pages show
the major parts of the instrument panel that are
described in this chapter. Some items shown
may not be on all vehicles.
*
[LG00700(ALL)06/93]
In your vehicle, the warning lights and gauges
are grouped together on the instrument panel.
We call this grouping a cluster.
[LG00750(ALL)03/95]
To clean the lenses on your instrument panel,
use Ford Glass Cleaner and a soft cloth. Never
use paper towels or abrasive cleaners; they can
scratch the lenses.
*
[LG00800(ALL)01/95]
Your vehicle has a mechanical cluster.
File:prlgp.ex
Update:Fri Jun 23 19:38:06 1995
Page 55 of 298
![FORD PROBE 1996 2.G Owners Manual 54 [LG01775(ALL)04/93]The mechanical cluster on the Probe GT model is
similar to the one shown. The two exceptions
are: the speedometer on the GT model shows
140 mph (225 km/h) and it has a 7,000 rpm
FORD PROBE 1996 2.G Owners Manual 54 [LG01775(ALL)04/93]The mechanical cluster on the Probe GT model is
similar to the one shown. The two exceptions
are: the speedometer on the GT model shows
140 mph (225 km/h) and it has a 7,000 rpm](/manual-img/11/5320/w960_5320-54.png)
54 [LG01775(ALL)04/93]The mechanical cluster on the Probe GT model is
similar to the one shown. The two exceptions
are: the speedometer on the GT model shows
140 mph (225 km/h) and it has a 7,000 rpm
red-line tachometer.
[LG01780(ALL)01/92]
one third page art:0032087-B
GT model speedometer and tachometer
[LG01800(ALL)01/94]
The following warning lights and gauges are on
the cluster. All of the warning lights and gauges
alert you to possible problems with your vehicle.
The following sections detail what each of these
indicators means.
*
[LG01950(ALL)01/95]
Indicator Lights and Chimes
%*
[LG01975(ALL)05/95]
Safety Belt Warning Light and Chime
[LG01980(ALL)03/94]
This warning light and chime remind you to
fasten your safety belt. If you do not fasten your
safety belt before the ignition is turned to ON,
the chime will sound for 4 to 8 seconds and the
warning light will illuminate for 1 to 2 minutes,
or until the safety belt is fastened. If you fasten
the safety belt before the ignition is turned to
ON, neither the light nor chime will activate.
File:prlgp.ex
Update:Fri Jun 23 19:38:06 1995
Page 59 of 298
58 [LG04360(ALL)04/95]The Low Fuel Light
[LG04375(ALL)08/91]
This light comes on when fuel level in your tank
has reached approximately 2-3 gallons (7-10
liters).
[LG04395(ALL)01/92]
one inch art:0032048-A
Low fuel light
*
[LG04500(ALL)01/95]
High Beam Light
*
[LG04600(ALL)03/95]
This light comes on when the headlamps are
turned to high beam or when you flash the
lights.
*
[LG04700(ALL)01/92]
one inch art:0030174-A
High beam light
%*
[LG05300(ALL)03/95]
Check Engine Warning Light
*
[LG05400(ALL)05/95]
This light comes on when the electronic engine
control system is not working properly. This is
the computer system that controls the operating
conditions of the engine.
*
[LG05450(ALL)09/93]
one inch art:0030175-B
Check engine warning light
File:prlgp.ex
Update:Fri Jun 23 19:38:06 1995
Page 78 of 298
78 [SC01105(ALL)08/91]
quarter page art:0032032-AHeadlamp control
*
[SC01110(ALL)01/95]
Daytime Running Light System
*
[SC01115(ALL)03/95]
(Canadian vehicles only)
*
[SC01120(ALL)05/95]
In Canada, certain regulations require vehicles to
be driven with lights illuminated during daytime
operation. It is for that reason that the daytime
running lights are automatically illuminated
when the ignition switch is turned to the ON
position. The daytime running lights are
switched off under the following conditions:
*
[SC01130(ALL)05/95]
q
when the headlamps are switched on
*
[SC01140(ALL)01/92]
q
when the parking brake is applied
*
[SC01150(ALL)01/92]
q
when the flash-to-pass system is used
*
[SC01175(ALL)05/95]
RWARNING
The Daytime Running Light (DRL) system
will not illuminate the tail lamps and
parking lamps. Turn on your headlamps
at dusk. Failure to do so may result in a
collision.
File:prscp.ex
Update:Fri Jun 23 19:37:07 1995