Page 141 of 444
![FORD EXPLORER 1996 2.G Owners Manual Steering Column Controls
141
*
[SC06450(ALL)09/95]
To change the position of the steering wheel, push the release
lever under the steering column away from you. Tip the
steering wheel to the desired p FORD EXPLORER 1996 2.G Owners Manual Steering Column Controls
141
*
[SC06450(ALL)09/95]
To change the position of the steering wheel, push the release
lever under the steering column away from you. Tip the
steering wheel to the desired p](/manual-img/11/4952/w960_4952-140.png)
Steering Column Controls
141
*
[SC06450(ALL)09/95]
To change the position of the steering wheel, push the release
lever under the steering column away from you. Tip the
steering wheel to the desired position. Pull the lever back into
place to lock the steering wheel.
*
[SC07250(ALL)12/89]
Be sure the steering wheel locks in a notch. It is not infinitely
adjustable. Do not adjust the steering wheel while the vehicle is
in motion.
%*
[SC07300(ALL)03/91]
Speed Control (If equipped)
*
[SC07400(ALL)06/95]
If your vehicle has speed control, you can automatically
maintain a constant speed at or above 30 mph (50 km/h).
*
[SC07450(ALL)06/95]
Use of radio transmitting equipment that is not Federal
Communications Commission (FCC) or in Canada the Canadian
Radio and Telecommunications Commission (CRTC) approved
may cause the speed control to malfunction. Therefore, use only
properly installed FCC (CRTC in Canada) approved radio
transmitting equipment in your vehicle.
[SC07500(ALL)10/94]
7-1/2 pica art:0020091-F
The speed control switches
*
[SC07800(ALL)08/95]
To set the speed control:
*
[SC08000(ALL)08/95]1.
Press and release the ON switch.
[SC08100(ALL)02/95]2.
Accelerate to the desired speed above 30 mph (48 km/h)
using the accelerator pedal.
File:07unscx.ex
Update:Thu Feb 29 09:06:35 1996
Page 147 of 444
147
Features
*
[FV00350(ALL)02/95]
Your vehicle has a variety of features designed for your
comfort, convenience and safety. Read this chapter to find out
about standard and optional features.
%*
[FV00601(ALL)01/95]
Doors
*
[FV00701(ALL)06/95]
Door Handles and Locks
[FV00901( X)08/94]
17-1/2 pica
art:0020548-C
Inside handles
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 148 of 444
148
[FV01502( X)10/94]
10-1/2 pica
art:0021367-A
Outside handles and locks
[FV01600( X)10/95]
Two step unlock feature (if equipped)
[FV01620( X)10/95]
This feature allows you to unlock all vehicle doors with the key.
[FV01640( X)10/95]1.
Unlock driver door with key.
[FV01660( X)12/95]2.
Repeat unlock procedure within 5 seconds. All doors will
unlock when the key is returned to the vertical position
(position of the key before removal).
[FV01680( X)10/95]
NOTE: This feature can be activated by all outside locks on
vehicles equipped with keyless entry.
%*
[FV01801(ALL)03/95]
Anti-theft front door lock knobs
*
[FV01901(ALL)10/89]
Anti-theft lock knobs are designed to preclude unlocking the
door by pulling up on the bullet type lock knob. To unlock and
open the front door from the inside of the vehicle, pull on the
inside door handle.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 149 of 444
Features
149
[FV02001( X)01/91]
Setting the Childproof Locks for the Rear Doors
*
[FV02101( X)03/95]
In addition to standard or power locks, your vehicle has
childproof locks for the rear doors. If you set these locks, the
rear doors cannot be opened from the inside of the vehicle. The
doors can still be opened from the outside when the lock knobs
are raised.
[FV02300( X)08/94]
17-1/2 pica
art:0020545-C
The child lock lever
*
[FV02401( X)03/95]
To set the childproof lock on each rear door, open the rear
door.
[FV02601( X)01/95]
Find the lever near the white label with the word LOCKED in
green letters. Move the lever up.
*
[FV02801( X)03/95]
To release the childproof lock, open the rear door from the
outside.
*
[FV03001( X)06/95]
Move the lever down.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 150 of 444
![FORD EXPLORER 1996 2.G Owners Manual 150
[FV04900( X)08/94]
Liftgate Handle and Locks
[FV05000( X)10/94]
10-1/2 pica art:0020550-F
Liftgate handle and locks
[FV05100( X)11/89]
You can unlock the liftgate by using the key. To open the
lif FORD EXPLORER 1996 2.G Owners Manual 150
[FV04900( X)08/94]
Liftgate Handle and Locks
[FV05000( X)10/94]
10-1/2 pica art:0020550-F
Liftgate handle and locks
[FV05100( X)11/89]
You can unlock the liftgate by using the key. To open the
lif](/manual-img/11/4952/w960_4952-149.png)
150
[FV04900( X)08/94]
Liftgate Handle and Locks
[FV05000( X)10/94]
10-1/2 pica art:0020550-F
Liftgate handle and locks
[FV05100( X)11/89]
You can unlock the liftgate by using the key. To open the
liftgate, rotate the handle clockwise and to open the liftgate
window, rotate the handle counterclockwise.
[FV05200( X)05/95]
You can lock the liftgate by using the key, pushing the lock
button down, or using the power door lock switch on the left
side of the cargo area.
*
[FV05300( X)10/89]
Make certain that you close the liftgate door and window before
driving your vehicle. If you do not, possible damage may occur
to the liftgate door lift cylinders and attaching hardware.
*
[FV05400( X)08/95]
RWARNING
When driving your vehicle make sure that the liftgate
door and window are closed to prevent exhaust fumes
from being drawn into the vehicle. This will also prevent
cargo from falling out.
*
[FV05900( X)12/93]
The liftgate area is only intended for cargo, not passengers. You
can open and close the liftgate from outside the vehicle. It
cannot be opened from inside the cargo area.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 155 of 444
Features
155
%*
[FV14100(ALL)04/95]
Power Door Locks (If equipped)
[FV14500( X)05/95]
The power door lock switches are located in the front doors and
in the driver side trim panel of the cargo area. To lock all doors
push the switch button marked L. To unlock all doors push the
switch button marked U.
*
[FV14701(ALL)03/91]
The manual door locks will override the power door lock
controls.
[FV15201( X)04/94]
24 pica art:0020553-C
Power door lock controls
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 156 of 444
![FORD EXPLORER 1996 2.G Owners Manual 156
%*
[FV15203( X)09/95]
Using the Keyless Entry System (If equipped)
*
[FV15205( X)02/95]
If your vehicle has the keyless entry system, you can lock or
unlock the vehicle doors without using a key. FORD EXPLORER 1996 2.G Owners Manual 156
%*
[FV15203( X)09/95]
Using the Keyless Entry System (If equipped)
*
[FV15205( X)02/95]
If your vehicle has the keyless entry system, you can lock or
unlock the vehicle doors without using a key.](/manual-img/11/4952/w960_4952-155.png)
156
%*
[FV15203( X)09/95]
Using the Keyless Entry System (If equipped)
*
[FV15205( X)02/95]
If your vehicle has the keyless entry system, you can lock or
unlock the vehicle doors without using a key. The buttons for
the system are near the outside door handle on the driver's
side. See alsoRemote Entry Systemwhich follows this
description.
[FV15207( X)02/95]
10-1/2 pica
art:0021158-A
Keyless entry buttons
*
[FV15209( X)02/95]
When you bought your vehicle, you were given a computer
code that operates the system for your vehicle. For your
convenience, we have duplicated this code in two places.
*
[FV15211( X)09/95]
The code is:
*
[FV15213( X)09/95]
n
on your owner's wallet card found in the glove compartment
*
[FV15217( X)02/95]
n
taped to the computer module
*
[FV15219( X)05/95]
When you use this entry system, the illuminated entry system
turns on the interior lights for 25 seconds and the buttons on
the keypad light up for 5 seconds. Do not push the buttons
with a key, ballpoint pen, pencil or any other hard object. These
objects could damage the buttons.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
Page 157 of 444
![FORD EXPLORER 1996 2.G Owners Manual Features
157
%*
[FV15273( X)09/95]
Programming your own entry code
*
[FV15275( X)02/95]
You can program a personal code to unlock your vehicle with
the keypad. This code does not replace the permanent FORD EXPLORER 1996 2.G Owners Manual Features
157
%*
[FV15273( X)09/95]
Programming your own entry code
*
[FV15275( X)02/95]
You can program a personal code to unlock your vehicle with
the keypad. This code does not replace the permanent](/manual-img/11/4952/w960_4952-156.png)
Features
157
%*
[FV15273( X)09/95]
Programming your own entry code
*
[FV15275( X)02/95]
You can program a personal code to unlock your vehicle with
the keypad. This code does not replace the permanent code that
the dealership gave you. Use your personal code in the same
manner as you would your original code.
*
[FV15277( X)09/95]
To program your own code:
*
[FV15279( X)09/95]1.
Select five digits for your personal code.
*
[FV15281( X)09/95]2.
Enter the permanent code that the dealership gave you.
*
[FV15283( X)09/95]3.
Within five seconds, press 1/2.
*
[FV15285( X)09/95]4.
Within five seconds of pressing 1/2, enter your personal
code, pressing each digit within five seconds of the previous
digit.
*
[FV15287( X)09/95]
The keyless entry system registers this second code. To open
your vehicle, you can now use either code. The module
remembers only one personal code at a time. Entering a
second personal code will erase the first, replacing it with
the new second one.
*
[FV15289( X)09/95]
To erase your personal code:
*
[FV15291( X)09/95]1.
Enter the original permanent code.
*
[FV15293( X)09/95]2.
Press 1/2 within five seconds of Step 1.
*
[FV15295( X)09/95]3.
Wait six seconds.
*
[FV15297( X)09/95]
The keyless entry system automatically erases your personal
code. The system will now only respond to the permanent
code.
*
[FV15299( X)09/95]
Do not set a code that presents the numbers in sequential order,
such as 1/2, 3/4, 5/6, 7/8, 9/0. Studies show that people who
idly press the buttons usually press a sequential pattern. Also,
do not select a code that uses the same button five times.
Thieves can easily figure out these types of codes.
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996