1996 FORD ESCORT display

205
*
[AS06400(ALL)08/95]
How to insert a disc and begin play
*
[AS06450(ALL)08/95]
Insert one disc,label side upinto the disc
opening. When inserted, the disc automatically
loads into the unit and play starts at the
beginning of the first track (selection).
*
[AS06500(ALL)08/95]
When the disc reaches the end, the disc player
automatically returns to the beginning of the
disc and resumes playing.
*
[AS06550(ALL)08/95]
NOTE: Once a disc is inserted, the disc
opening is secured to prevent the
accidental insertion of a second disc.
*
[AS06600(ALL)08/95]
NOTE: The CD player has heat protection
circuitry to protect the laser diode. If
the temperature of the player reaches
167ÊF (75ÊC), theheat detection circuit
will shut off the player and ªTOO
HOTº will scroll in the display for
approximately five seconds (radio will
resume playing). When the temperature
returns to normal operating range, the
CD player will again be operational.
*
[AS06650(ALL)08/95]
How to stop and restart the CD player
*
[AS06700(ALL)08/95]
When a disc is loaded, the unit automatically
enters the play mode and the play indicator
a
illuminates. To stop temporarily, press the
ªPLAY/STOPº button or the ªAM/FMº button.
The stop indicator
Xin the display illuminates
and operation returns to the radio mode. To
resume CD play, press the ªPLAY/STOPº
button once again.
*
[AS06750(ALL)08/95]
NOTE: If the ignition key is turned OFF
during play and then is set to the ON
or ACCESSORY position, the CD
player will resume playing in the mode
it was in when ignition was turned off.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

206
*
[AS06800(ALL)08/95]
How to fast forward or reverse your CD
player
*
[AS06850(ALL)08/95]
To quickly search for a particular point in a
selection, press the ªFFº button (to fast forward)
or the ªREVº button (to reverse). While either
button is pressed, the disc goes forward or
backward at two different speeds depending on
how long the button is held down. (Pressing
either button for more than three seconds will
speed up the process.) Release the button at the
desired point (found by watching the elapsed
playing time in the display or by listening to the
sound during fast forward or reverse). When
you have reached the beginning of track 1, the
CD player will begin playing.
*
[AS06900(ALL)08/95]
When you have reached the end of the disc by
keeping the fast forward button pressed, the
display will show ªENDº and the player will go
into pause mode. Push the ªPLAY/STOPº
button to begin playing the first track of the
disc, press the ªREVº button to back up from
the end of the disc, or use the ªSEEKº function
to locate a desired track.
*
[AS06955(ALL)08/95]
Using the ªSEEKº feature
*
[AS06960(ALL)08/95]
The ªSEEKº feature allows you to quickly find a
particular selection on the disc.
*
[AS06965(ALL)08/95]
Press the bottom (
b) half of the ªSEEKº button
once to repeat the current playing selection.
Press the top (
a) half of the ªSEEKº button to
advance to the next selection.
*
[AS06970(ALL)08/95]
Pressing and holding the bottom (
b) or top (
a)
half of the ªSEEKº button will scroll backward
and forward respectively through the tracks.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

207
*
[AS07000(ALL)08/95]
Using the ªSCANº function
*
[AS07050(ALL)08/95]
Press the ªSCAN/TUNEº button to enter the
scan mode. Once in the scan mode, press the top
(
a) or bottom (
b) half of the ªSEEKº button to
scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on
each listenable track for approximately eight
seconds. This continues until you press the
ªSCAN/TUNEº button a second time. While in
the scan mode, the display shows the current
sampled track number.
*
[AS07100(ALL)08/95]
Special features of your CD player
*
[AS07150(ALL)08/95]
q
Compression
*
[AS07200(ALL)08/95]
The compression feature will bring soft and
loud passages closer together for a more
consistent listening level.
*
[AS07250(ALL)08/95]
To turn the compression on, press the
ªCOMPº button. When on, the compression
indicator (ªCº) will appear in the display.
Press the button again to turn off.
*
[AS07300(ALL)08/95]
q
Automatic Disc Storage
*
[AS07350(ALL)08/95]
If the disc is ejected from the CD player but
is not removed from the disc opening within
approximately 10 seconds, the player will
automatically reload the disc for storage,
unless the disc is automatically ejected due to
a ªfocus errorº (disc inserted upside down).
In this case, the disc will not be automatically
reloaded.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

213
%*
[AS21905(ALL)08/95]
Electronic Stereo and Stereo
Cassette Radios
*
[AS21910(ALL)08/95]
Using the Controls on Your New Radio
*
[AS21915(ALL)08/95]
How to turn the radio on and adjust the
volume
*
[AS21920(ALL)08/95]
Press the ªPOWERº button to turn the radio on.
Press it again to turn it off.
*
[AS22050(ALL)04/94]
Press the right (+) side of the ªVOLUMEº
button to increase the volume. Press the left (-)
side of the button to decrease the volume.
Illuminated bars in the display show the relative
volume level.
*
[AS22100(ALL)08/95]
Selecting the AM or FM frequency band
*
[AS22210(ALL)07/95]
Push the ªAM/FMº button to select the desired
frequency band. Pushing the button more than
once will alternate between AM, FM1 and FM2.
These functions are used with the station
memory buttons described underHow to tune
radio stations.
*
[AS22300(ALL)08/95]
How to tune radio stations (Stereo Radio)
*
[AS22400(ALL)08/95]
There are three ways for you to tune in to a
particular station. You can manually locate the
station by using the ªTUNEº button, ªSEEKº the
station or select the station by using the memory
preset buttons, which you can set to any desired
frequency.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

214 %
*
[AS22450(ALL)08/95]
How to tune radio stations (Stereo Cassette
Radio)
*
[AS22475(ALL)08/95]
There are four ways for you to tune in to a
particular station. You can manually locate the
station by using Automatic Music Search
(ªAMSº), ªSEEKº the station, ªSCANº to the
station or select the station by using the memory
buttons, which you can set to any desired
frequency.
*
[AS22500(ALL)09/95]
q
Using the ªTUNEº function (Stereo Radio)
*
[AS22600(ALL)08/95]
You can change the frequency up or down
one increment at a time by pressing and
releasing either the right (+) or left (S) side
of the ªTUNEº button. To change frequencies
quickly, press and hold down either the right
or left side of the ªTUNEº button.
*
[AS22650(ALL)08/95]
q
Using the ªAMSº function to manually tune
your radio (Stereo Cassette Radio)
*
[AS22675(ALL)08/95]
You can change the frequency up or down
one increment at a time by first pressing the
ªAMSº button (display shows ªTUNEº) then
within approximately five seconds pressing
and releasing either the right
aor left
b
side of the ªSEEKº button. To change
frequencies quickly, press andhold down
either the right or left side of the ªSEEKº
button.
*
[AS22700(ALL)08/95]
Manual tuning adjusts your radio to any
allowable broadcast frequency, whether or
not a station is present on that frequency.
(SeeAll About Radio Frequenciesin this
section.)
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

216
*
[AS23900(ALL)08/95]
NOTE: If the vehicle's battery is disconnected,
the clock and station memory preset
buttons will need to be reset.
*
[AS24000(ALL)08/95]
Adjusting the tone balance and speaker
output of your radio
*
[AS24100(ALL)08/95]
q
Increasing or decreasing bass response
[AS24250(ALL)06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªBASS.º Push the ª+º side
of the ªVOLUMEº button to increase bass
(more ªlowsº), and push the ª-º side to
decrease bass (less ªlowsº).
*
[AS24300(ALL)08/95]
q
Increasing or decreasing treble response
[AS24450(ALL)06/95]
Push the ªAUDIOº button repeatedly until
the display reads ªTREB.º Push the ª+º side
of the ªVOLUMEº button to increase treble
(more ªhighsº), and push the ª-º side to
decrease treble (less ªhighsº).
*
[AS24500(ALL)08/95]
Speaker features and operation
*
[AS24600(ALL)08/95]
q
Adjusting speaker balance
[AS24750(ALL)06/95]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the ªAUDIOº button
repeatedly until the display reads ªBAL.º
Push the ª+º side of the ªVOLUMEº button
to shift the sound to the right speakers, and
push the ª-º side to shift the sound to the
left speakers.
*
[AS24800(ALL)08/95]
q
Adjusting speaker fader
[AS24950(ALL)06/95]
Fade control allows you to adjust the sound
distribution between the front and rear
speakers. Push the ªAUDIOº button
repeatedly until the display reads ªFADE.º
Push the ª+º side of the ªVOLUMEº button
to shift the sound to the front speakers, and
push the ª-º side to shift the sound to the
rear speakers.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

217 %
*
[AS25000(ALL)08/95]
Using the Controls of Your Cassette Tape
Player
*
[AS25500(ALL)08/95]
How to insert a tape
*
[AS25600(ALL)08/95]
Insert a cassette (with the open edge to the
right) firmly into the tape door opening, making
sure the cassette is completely in and ªseated.º
*
[AS25700(ALL)08/95]
How to locate a desired track on the tape
*
[AS25800(ALL)06/95]
NOTE: The tape track or side number
indicated in the display does not
necessarily correspond to the tape track
or side number on the cassette label. It
is used only to indicate when the tape
mechanism reverses tracks.
*
[AS25848(ALL)05/94]
q
Using the Automatic Music Search (ªAMSº)
function with cassette tape player
*
[AS25850(ALL)08/95]
Press and hold the ªAMSº button (ªAMSº
will appear in the display). Then, push the
left
hbutton to rewind to the beginning
of the current selection or press the right
gbutton to fast forward to the beginning
of the next selection.
*
[AS25900(ALL)09/95]
q
Fast forwarding the tape
*
[AS26000(ALL)08/95]
Push the right
gbutton to fast forward
the tape.
*
[AS26100(ALL)08/95]
q
Rewinding the tape
*
[AS26200(ALL)08/95]
Push the left
hbutton to rewind the tape.
*
[AS26900(ALL)08/95]
q
How to change the side of the tape being
played
*
[AS27000(ALL)08/95]
The alternate track (other side) of the tape
can be selected at any time by pushing both
fast-wind buttons (
hand
g) at the
same time. The number in the display will
alternate between 1 and 2.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995

218
*
[AS27100(ALL)08/95]
How to eject the tape
*
[AS27250(ALL)08/95]
To stop the tape and eject the cassette, press the
ªEJECTº button. The radio will resume playing.
*
[AS27300(ALL)08/95]
Using the DolbyHB noise reduction feature
*
[AS27400(ALL)08/95]
NOTE: Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. ªDolbyº and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
*
[AS27500(ALL)08/95]
Push thek/memory preset #3 button to
activate. Push again to deactivate.
%*
[AS27510(ALL)08/95]
Clock Operation
*
[AS27520(ALL)08/95]
How to view the clock mode
*
[AS27530(ALL)08/95]
Press the ªCLOCKº button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
*
[AS27540(ALL)08/95]
How to set the clock
*
[AS27550(ALL)08/95]
1. Turn the radio on.
*
[AS27560(ALL)08/95]
2. Press and hold in the ªCLOCKº button,
press the ªSEEKº button left (
b) to advance
the hours and right (
a) to advance the
minutes.
*
[AS27570(ALL)08/95]
NOTE: The clock displays 12-hour time with
no AM/PM indications.
File:09ctase.ex
Update:Tue Sep 19 14:51:59 1995