1996 FORD ESCORT warning

186 [FV24975(ALL)08/95]To adjust the driver-side mirror, set the mirror
selection switch to the L position. To adjust the
passenger-side mirror, set the selection switch to
the R position.
[FV25025(ALL)03/91]
After you choose the mirror you want to adjust,
you can move the mirror in any of four
directions. Move the knob in the direction you
would like the mirror to move. After completing
adjustment, move the switch to the center
position to avoid moving the mirror by mistake.
*
[FV25700(ALL)05/95]
RWARNING
The side view mirror on the right makes
objects appear smaller and farther away
than they actually are.
[FV27280(ALL)06/95]
Do not clean the plastic housing of any rearview
mirror with fuel or other petroleum-based
cleaning products.
File:08ctfve.ex
Update:Tue Sep 19 14:50:19 1995

187
[FV31050(ALL)08/95]
Cupholder and Tray (If equipped)
[FV31060(ALL)04/94]
Your vehicle may have a removable cupholder
and storage tray for your convenience.
[FV31062(ALL)04/94]
If you have the removable cupholders and
storage tray, they can be washed in a
dishwasher.
[FV31070(ALL)07/93]
one third page art:0070013-B
The cupholder and tray
*
[FV31085(ALL)01/95]
RWARNING
Use only soft cups in the cupholder. Hard
objects can injure you in a collision.
File:08ctfve.ex
Update:Tue Sep 19 14:50:19 1995

189
[FV38502(E )12/89]
Cargo Area Cover
[FV38503(E )12/89]
This removable cover hides cargo in the luggage
compartment. The cover lifts automatically when
you open the hatchback.
[FV38505(E )06/94]
half page art:0070263-A
The lift cords on the hatchback
[FV38510(E )04/94]
RWARNING
Do not place any items on the cargo area
cover. They may make it difficult to see
out the window, or they could be
dangerous if they strike any occupants of
the vehicle in the case of a sudden stop or
collision.
File:08ctfve.ex
Update:Tue Sep 19 14:50:19 1995

191 [FV38524(E )09/93]
RWARNING
The cover may cause injury in a sudden
stop or accident if it is not securely
installed. Therefore, the cover should
either be securely installed or removed
from the vehicle. To be securely installed,
the cover must be attached to the brackets
and the two cords must be fastened.
*
[FV38526(E )11/91]
To install the luggage compartment cover:
*
[FV38528(E )12/89]
1. Raise the hatchback to the fully open
position.
[FV38531(E )09/93]
2. Place the cargo cover on the rear trim panels
so that the hinge pins rest in front of the
mounting clips behind the seatback.
[FV38533(E )03/91]
3. Push the hinge pins into the mounting clips
on the rear trim panel.
[FV38534(E )12/89]
4. Connect the cord loops to the pins in the
sides of the hatchback.
*
[FV38536(E )12/89]
5. Close the hatchback.
[FV38537(E )12/89]
RWARNING
To prevent the possibility of injuries, the
fasteners for the cargo area cover must be
properly attached to the mounting clips on
the rear trim panels.
File:08ctfve.ex
Update:Tue Sep 19 14:50:19 1995

193
*
[FV38550(ALL)05/90]
3. Hook the sides of the outstretched shade to
notch in the rear trim panels near the liftgate
opening.
[FV38552(ALL)09/93]
RWARNING
The cover may cause injury in a sudden
stop or accident if it is left lying loose in
the vehicle or if it is not securely
installed. Therefore, the cover should
either be securely installed or removed
from the vehicle. To be securely installed,
the cover must be attached to the brackets
and to the tethered safety clips.
[FV38555(ALL)12/91]
half page art:0000878-A
The shade
*
[FV38556(ALL)05/91]
The shade is a wind-up type, just like a window
shade. Over time the shade may lose its spring
tension. If this happens, you can easily rewind
the shade with the help of another person.
File:08ctfve.ex
Update:Tue Sep 19 14:50:19 1995

224 %
*
[DR03800(ALL)01/95]
Putting Your Vehicle in Gear
*
[DR04001(ALL)05/95]
RWARNING
Hold the brake pedal down while you
move the gearshift lever from position to
position. If you do not hold the brake
pedal down, your vehicle may move
unexpectedly and injure someone.
*
[DR04025(ALL)07/93]
Using a Console-Mounted Gearshift
[DR04050(ALL)08/95]
Since your vehicle has a console-mounted
gearshift, you must depress the brake pedal,
then push in the thumb button to move the
gearshift to the position you choose.
*
[DR04900(ALL)11/94]
Once the gearshift is secure in the desired
position, release the brake pedal and use the
accelerator as necessary.
[DR04950(ALL)06/94]
one third page art:0070193-C
The automatic console-mounted gearshift lever
[DR05010(ALL)08/95]
To move the gearshift out of P (Park), the
ignition must be turned to the ON position and
the brake pedal must be depressed. When the
gearshift is in any other position except P (Park),
the ignition key cannot be turned to LOCK or be
removed from the steering column. To remove
the key, the gearshiftmustbe in P (Park).
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

226 [DR05045(ALL)06/94]NOTE: You may use the override handle
provided in your Owner Guide
portfolio in place of a screwdriver.
*
[DR05050(ALL)03/93]
3. Push and hold the thumb button.
*
[DR05060(ALL)09/93]
4. Move the gearshift lever.
*
[DR05070(ALL)07/95]
If you need to shift out of P (Park) by using the
alternate procedure described above, it is
possible that a fuse has blown and that your
brakelamps may also not be functional. Please
refer to the chapter titledServicing Your Escortin
this Owner Guide for instructions on checking
and replacing fuses.
*
[DR05075(ALL)09/95]
RWARNING
DO NOT DRIVE YOUR VEHICLE UNTIL
YOU VERIFY THAT THE BRAKELAMPS
ARE WORKING.
%*
[DR05300(ALL)01/95]
Driving
%*
[DR05400(ALL)04/95]
When to usej(Overdrive)
*
[DR05500(ALL)04/95]
j(Overdrive) is the usual driving position for
an automatic overdrive transaxle. It works the
same way D (Drive) works, automatically
upshifting or downshifting as the vehicle speeds
or slows.
*
[DR05600(ALL)04/95]
However,j(Overdrive) also shifts into a fourth
gear Ð an overdrive gear Ð when your vehicle
cruises at a consistent speed for any length of
time. This fourth gear will increase your fuel
economy when you travel at cruising speeds.
*
[DR05700(ALL)04/95]
j(Overdrive) may not be appropriate for
certain terrain. If the transaxle shifts back and
forth between third and fourth gears while you
are driving on hilly roads or if your vehicle
requires additional power for climbing hills, shift
to D (Drive).
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995

228
*
[DR06400(ALL)06/92]
Parking
*
[DR06500(ALL)11/94]
Always come to a complete stop before you shift
into P (Park). Make sure that the gearshift is
securely latched in P (Park). This locks the
transaxle and prevents the front wheels from
rotating.
*
[DR06600(ALL)06/95]
RWARNING
Always set the parking brake fully and
make sure the gearshift is securely latched
in P (Park).
*
[DR06625(ALL)06/95]
RWARNING
Never leave your vehicle unattended
while it is running.
*
[DR06675(ALL)02/91]
You can tell the gearshift is securely latched
when the thumb button has popped out. In this
position the gearshift selector lever cannot be
moved unless the button is pushed in.
*
[DR06680(ALL)05/95]
RWARNING
Hold the brake pedal down while you
move the gearshift lever from position to
position. If you do not hold the brake
pedal down, your vehicle may move
unexpectedly and injure someone.
File:10ctdre.ex
Update:Tue Sep 19 14:53:34 1995