1996 FORD CROWN VICTORIA fuel

[x] Cancel search: fuel

Page 9 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 6 %
*
[IN07200( ALL)04/95]
Washing and Polishing Your Vehicle
*
[IN07300( ALL)04/95]
Wash the outside of your vehicle, including the
underside, with a mild detergent.
*
[IN07400( ALL)04/95]
DO NOT:
*

Page 47 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 54 %
*
[LG07200( ALL)01/95]
High Beam Light
*
[LG07300( ALL)03/95]
This light comes on when the headlamps are
turned to high beam or when you flash the
lights.
[LG07400( ALL)05/92]
one inch art:001012

Page 49 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 56installed. Do not install these devices by tapping
into or running wires close to powertrain control
system wires or components.
[LG11045( GV)05/94]
one inch art:0010134-A*
[LG11050( ALL)03/95]
The

Page 50 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 57
Engine Warning Light will turn off after the
vehicle has completed three consecutive warm
up cycles without a misfire condition occurring.
A warm up cycle consists of engine start from a
cold condi

Page 51 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 58 %
*
[LG13000( ALL)01/95]
Fuel Gauge
[LG13050( GV)05/95]
one third page art:0010695-A
The fuel gauge
[LG13100( ALL)08/93]
The fuel gauge displays approximately how
much fuel is in the fuel tank only

Page 60 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 67
*
[LG27810( GV)03/95]
The light comes on briefly when you turn the
ignition key toON, but it should turn off when
the engine starts. If the light does not come on
when you turn the ignition toONor

Page 61 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 68
*
[LG27900( GV)05/95]
Under certain conditions, the Check Engine
Warning Light may come on if the fuel cap is
not properly installed. If the Check Engine
Warning Light comes on and you suspect that

Page 64 of 342

FORD CROWN VICTORIA 1996 1.G Owners Manual 71 %
*
[LG28140( GV)01/95]
Speed Control Indicator Light
*
[LG28150( GV)01/95]
This light comes on when the speed control
system is actively maintaining the set speed. It
will go off when the brakes a
Page:   1-8 9-16 17-24 25-32 33-40 ... 48 next >