1996 FORD CROWN VICTORIA lock

122
*
[FV01140( GV)03/95]
To set the childproof lock on each rear door,
open the rear door.
[FV01160( GV)03/95]
Find the lever inside the label with the word
LOCKED. Move the lever up.
*
[FV01180( GV)03/95]
To release the childproof lock, open the rear
door from the outside.
*
[FV01195( GV)03/95]
Move the lever down.
%*
[FV01400( ALL)04/95]
Power Door Locks (If equipped)
[FV01600( ALL)03/95]
If your vehicle has power door locks, the
controls to lock the doors are on the trim panel
of the front door. When you close the doors
after you set the door locks, the doors remain
locked. If the power mechanism fails, the manual
door locks will override the power controls.
Pulling on a front inside door handle will
automatically override and release the front door
lock.
[FV02100( GV)05/94]
one third page art:0010224-D
The power locks on the driver's door
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

123 %
*
[FV02600( BCGV)01/95]
Using the Illuminated Entry System
(If equipped)
[FV03100( BCGV)05/95]
The interior lights will illuminate for
approximately 25 seconds when either front door
handle is lifted, any button on the keyless entry
pad is pressed, or the remote entry system
UNLOCK button is pushed. If the amount of
light outside your vehicle is below a
predetermined level, the exterior lights will also
illuminate.
[FV03200( BCGV)02/95]
These lights automatically turn off after 25
seconds or when you turn the ignition key to
ON or ACC. The inside lights will not turn off if
you have turned them on manually or if a door
is open.
%*
[FV03598( BCGV)05/95]
Using the Keyless Entry System
(If equipped)
[FV03600( BCGV)06/92]
If your vehicle has the keyless entry system, you
can lock or unlock the vehicle doors and trunk
without using a key. The buttons for the system
are above the outside door handle on the
driver's side.
[FV03850( GV)05/94]
one third page art:0010477-B
The keyless entry buttons
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

124
*
[FV03900( BCGV)04/95]
When you bought your vehicle, you were given
a computer code that operates the system for
your vehicle. For your convenience, we have
duplicated this code in three places.
*
[FV04000( BCGV)02/95]
The code is:
*
[FV04100( BCGV)02/95]
q
on your owner's wallet card found in the
glove compartment
[FV04400( BCGV)02/95]
q
taped to the underside of the trunk lid
[FV04800( GV)10/94]
q
taped to the computer module behind the
driver's door trim panel.
[FV04925( BCGV)05/95]
When you use this entry system, the illuminated
entry system turns on the interior lights for 25
seconds and the buttons on the keypad light up.
Do not push the buttons with a key, ballpoint
pen, pencil, or any other hard object. These
objects could damage the buttons.
%*
[FV04950( BCGV)02/95]
Unlocking the doors with the keyless entry
system
[FV05000( BCGV)02/95]
You must unlock the driver's door before you
unlock any of the other doors or trunk. If you
let more than five seconds pass between pressing
numbers, the system shuts down, and you have
to enter the code again. The system has shut
down if the keypad light is out. If the keyless
entry system does not work properly, use the
key or transmitter(s) to lock and unlock the
doors or unlock the trunk.
*
[FV05100( BCGV)02/95]
1. To unlock the driver's door, enter the factory
code or your personal code. All codes have
five numbers. After you press the fifth
number, the driver's door unlocks.
[FV05140( GV)03/92]
2. To unlock the passenger's doors, press the
3/4 button within five seconds of unlocking
the driver's door or trunk, or re-enter the
code to open the driver's door, then press
3/4.
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

125
*
[FV05320( GV)01/95]
3. To unlock the trunk, press the 5/6 button
within five seconds of unlocking the driver's
or passenger's doors, or re-enter the code to
open the driver's door, then press 5/6.
[FV05350( GV)06/93]
As long as the driver's door has been unlocked
first, you can open the passenger's doors or the
trunk in any order.
*
[FV05400( BCGV)02/95]
Locking the doors with the keyless entry
system
*
[FV05500( BCGV)02/95]
Along with unlocking your doors, you can use
the keyless entry system to lock the doors. You
can also use the Autolock feature to
automatically lock the doors after you get in the
vehicle.
[FV05600( BCGV)05/94]
To lock all of the vehicle's doors at the same
time, press 7/8 and 9/0 at the same time. It is
not necessary to first enter the keypad code.
% [FV05611( BCGV)02/95]
Autolock (With Keyless Entry if Equipped)
*
[FV05621( BCGV)02/95]
The Autolock feature will automatically lock all
the doors when:
[FV05631( BCGV)02/95]
q
the vehicle doors are fully closed
*
[FV05641( BCGV)02/95]
q
the ignition key is turned to the ON position
[FV05650( BCGV)02/95]
q
someone is sitting in the driver's seat or a
heavy object is placed on the seat, and
[FV05680( GV)10/94]
q
the vehicle is in any forward or reverse gear.
*
[FV05701( BCGV)02/95]
The Autolock feature will repeat when:
*
[FV05750( BCGV)02/95]
q
the ignition key remains in the ON position
[FV05825( GV)10/94]
q
someone remains sitting in the driver's seat
or a heavy object is on the seat,
*
[FV05865( GV)08/94]
q
a door is opened and then closed, and
[FV05880( GV)10/94]
q
the vehicle is in any forward or reverse gear.
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

126
*
[FV05901( BCGV)02/95]
If you do not want to use the Autolock feature,
it can be deactivated by using the buttons for
the keyless entry system.
[FV05950( BCGV)02/95]
To deactivate the Autolock feature:
[FV06001( BCGV)02/95]
1. Enter your permanent five-digit entry code
(not the user code you may have set).
*
[FV06051( BCGV)02/95]
2. Within 5 seconds, press and hold 7/8.
*
[FV06101( BCGV)02/95]
3. Within 5 more seconds, press and release
3/4.
*
[FV06200( BCGV)02/95]
4. Release 7/8.
*
[FV06300( BCGV)02/95]
To reactivate the Autolock feature, simply repeat
the instructions for deactivating the system. The
Autolock feature can be turned on and off using
the instructions above.
%*
[FV06800( BCGV)02/95]
Programming your own entry code
*
[FV06900( BCGV)01/95]
You can program a personal code to unlock
your vehicle. This code does not replace the
permanent code that the dealership gave you.
Use your personal code in the same manner as
you would your original code.
*
[FV07000( BCGV)02/95]
To program your own code:
*
[FV07050( BCGV)02/95]
1. Select five digits for your personal code.
[FV07100( BCGV)02/95]
2. Enter the permanent code that the dealership
gave you.
*
[FV07200( BCGV)02/95]
3. Within five seconds, press 1/2.
*
[FV07300( BCGV)02/95]
4. Within five seconds of pressing 1/2, enter
your personal code, pressing each digit
within five seconds of the previous digit.
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

127 [FV07350( GV)10/94]
5. Five seconds after you press the fifth digit,
your door lock system will lock and unlock
the vehicle doors to confirm successful
programming.
*
[FV07400( BCGV)02/95]
The keyless entry system registers this
second code. To open your vehicle, you can
now use either code. The module remembers
only one personal code at a time. Entering a
second personal code will erase the first,
replacing it with the new second one.
*
[FV07500( BCGV)02/95]
To erase your personal code:
*
[FV07600( BCGV)02/95]
1. Enter the original permanent code.
[FV07750( GV)10/94]
2. Press and release 1/2 within five seconds of
Step 1.
[FV07850( GV)10/94]
3. Press the 1/2 button a second time and hold
for two seconds.
*
[FV07900( BCGV)02/95]
The keyless entry system automatically
erases your personal code. The system will
now only respond to the permanent code.
*
[FV07950( BCGV)02/95]
Do not set a code that presents the numbers in
sequential order, such as 1/2, 3/4, 5/6, 7/8, 9/0.
Studies show that people who idly press the
buttons usually press a sequential pattern. Also,
do not select a code that uses the same button
five times. Thieves can easily figure out these
types of codes.
[FV07955( GV)10/94]
Your door lock system will lock and unlock the
vehicle doors to confirm successful erasure. The
system will now only respond to the permanent
code.
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

128 % [FV08007( GV)10/94]Battery Saver
*
[FV08012( GV)01/95]
When the ignition is turned off, the vehicle will
turn off battery voltage to the vehicle lamps as
follows:
*
[FV08016( GV)01/95]
q
Courtesy lights (lights which come on when a
door is opened): after 10 minutes.
[FV08020( GV)10/94]
q
Map/Glove compartment/Trunk/Hood
lamps: after 30 minutes.
[FV08023( GV)10/94]
q
Headlamps/Park lamps (only if headlamp
switch is left in Headlamp position): after 10
minutes.
*
[FV08027( BCGV)02/95]
This will prevent draining of the battery if those
lights have been left on inadvertently or if a
door is not completely closed. Battery voltage to
these lamps will be restored when the outside
front door handles are lifted, the keyless entry
keypad is used, the remote entry transmitter is
used, any door is opened, the trunk is opened,
or the ignition key is turned to the ON position.
%
*
[FV08030( ALL)02/95]
Remote Entry System
(If equipped)
*
[FV08036( ALL)03/94]
If your vehicle has the remote entry system, you
can lock and unlock the vehicle doors and open
the trunk without using a key. The remote also
has a personal alarm feature. The buttons for the
system are located on the hand held
transmitter(s) that came with your vehicle.
*
[FV08040( ALL)02/95]
The system will work with up to four
transmitters. Your vehicle came with two
transmitters. Additional transmitters can be
ordered from your dealer.
[FV08047( GV)10/94]
The remote entry features only operate with the
transmission in P (Park) or N (Neutral).
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996

129 [FV08053( GV)03/94]
one third page art:0011287-A
Remote entry transmitter
%*
[FV08055( ALL)02/95]
Unlocking the doors and opening the trunk
*
[FV08060( ALL)02/95]
To unlock the driver's door, press the UNLOCK
button.
*
[FV08065( ALL)02/95]
To unlock the other doors, press the UNLOCK
button a second time within five seconds of
unlocking the driver's door.
[FV08075( GV)05/95]
To open the trunk, press the TRUNK button
twice within five seconds.
*
[FV08080( ALL)02/95]
Locking the doors
*
[FV08085( ALL)02/95]
To lock all the doors, press the LOCK button.
[FV08093( GV)10/94]
The doors will lock and the horn will chirp to
indicate the vehicle is locked.
*
[FV08096( GV)01/95]
The door lock Horn Chirp is a programmable
feature. To deactivate the Horn Chirp feature:
*
[FV08099( GV)01/95]
1. Enter your permanent five-digit code (not
the user code you may have set).
[FV08102( GV)10/94]
2. Within five seconds, press and hold 7/8.
[FV08106( GV)10/94]
3. Within five more seconds, press and release
1/2.
*
[FV08108( GV)02/95]
4. Release 7/8.
File:rcfvv.ex
Update:Wed Jan 31 10:27:22 1996