1996 FORD BRONCO spare tire location

242
*
[RE05100(BEF )03/95]
Spare Tire Location
[RE07700(B )05/90]
The spare tire for your Bronco is mounted inside
on a carrier at the right rear quarter panel unless
you have an optional outside mounted spare
tire. To remove the spare tire, remove the wing
nut and plate. If so equipped, use a door key to
unlock the lock assembly and remove the plate.
To stow the spare tire, place the wheel on the
bolt and tighten the plate and wing nut, or lock
assembly, if so equipped.
[RE07800(B )02/89]
one third page art:0020271-A
Inside spare tire assembly
[RE08100(B )05/90]
one third page art:0020322-C
Spare tire mount
[RE08300(B )01/89]
The optional outside mounted spare tire is
mounted on a swing-away carrier that hinges on
the outside right rear corner of the truck.
File:ltreb.ex
Update:Fri Jun 9 15:25:48 1995

244 [RE09400(B )05/90]NOTE: If your truck has optional aluminum
wheels, you should slip the anti-scratch
spacer over the ªJº bolt between the
tire and carrier to prevent scratching
the aluminum styled-side surface.
[RE09500(B )05/91]
one third page art:0020273-C
Optional outside mounted spare tire and carrier
*
[RE15100(BEF )05/95]
RWARNING
Make sure the spare tire and jacking
equipment are stowed and secured in the
proper storage location.
%*
[RE15200( ALL)03/95]
Preparing to Change the Tire
*
[RE15250( ALL)12/91]
NOTE: To lift your vehicle by other than the
front or rear jacking points, be sure to
use only hoist adapters with a wide
contact surface.
*
[RE15300(B F )03/91]
1. Make sure that your vehicle will not move
or roll. If you have an automatic
transmission, put the gearshift in Park. If
you have a manual transmission, put the
gearshift in Reverse. Set the parking brake
and block the wheel that is diagonally
opposite the tire that you are changing.
*
[RE15335(B F )12/91]
NOTE: Make sure the ignition is in the OFF
position.
File:ltreb.ex
Update:Fri Jun 9 15:25:48 1995