1996 CHRYSLER VOYAGER Security

WIRING DIAGRAMS
CONTENTS
page page
AIR CONDITIONING-HEATER.......... 8W-42-1
AIRBAG SYSTEM................... 8W-43-1
ANTI-LOCK BRAKES................. 8W-35-1
AUDIO SYSTEM.................... 8W-47-1
BODY CONTROL MODULE............ 8W-45-1
CHARGING SYSTEM................. 8W-20-1
COMPONENT INDEX................. 8W-02-1
CONNECTOR/GROUND LOCATIONS..... 8W-90-1
CONNECTOR PIN-OUTS.............. 8W-80-1
FRONT LIGHTING................... 8W-50-1
FUEL/IGNITION SYSTEM............. 8W-30-1
GENERAL INFORMATION............. 8W-01-1
GROUND DISTRIBUTION............. 8W-15-1
HORN/CIGAR LIGHTER/POWER OUTLET . 8W-41-1
INSTRUMENT CLUSTER.............. 8W-40-1
INTERIOR LIGHTING................. 8W-44-1
JUNCTION BLOCK................... 8W-12-1
MESSAGE CENTER.................. 8W-46-1OVERHEAD CONSOLE................ 8W-49-1
POWER DISTRIBUTION.............. 8W-10-1
POWER DOOR LOCKS............... 8W-61-1
POWER MIRRORS.................. 8W-62-1
POWER SEAT...................... 8W-63-1
POWER WINDOWS.................. 8W-60-1
REAR LIGHTING.................... 8W-51-1
SPLICE INFORMATION............... 8W-70-1
SPLICE LOCATIONS................. 8W-95-1
STARTING SYSTEM................. 8W-21-1
TRAILER TOW...................... 8W-54-1
TRANSMISSION CONTROL SYSTEM.... 8W-31-1
TURN SIGNALS..................... 8W-52-1
VEHICLE SPEED CONTROL........... 8W-33-1
VEHICLE THEFT SECURITY SYSTEM.... 8W-39-1
WINDOW DEFOGGERS............... 8W-48-1
WIPERS........................... 8W-53-1
NS/GSWIRING DIAGRAMS 8W - 1

8W-39 VEHICLE THEFT SECURITY SYSTEM
Component Page
Body Control Module...............8W-39-2, 3, 4
BS19...............................8W-39-2
Clockspring..........................8W-39-2
Driver Door Ajar Switch................8W-39-2
Driver Door Arm/Disarm Switch..........8W-39-3
Driver Door Lock Switch................8W-39-3
Fuse 9 (PDC).........................8W-39-2
Fuse 18 (PDC)........................8W-39-5
Fuse 28 (PDC)........................8W-39-2
G200...............................8W-39-5
G301...........................8W-39-2, 3, 4
G302...............................8W-39-4
G400.............................8W-39-3, 4
High Note Horn.......................8W-39-2
Hood Ajar Switch.....................8W-39-4
Horn Relay..........................8W-39-2
Horn Switch.........................8W-39-2
Junction Block......................8W-39-2, 5Component Page
Left Rear Door Ajar Switch..............8W-39-4
Liftgate Ajar Switch...................8W-39-4
Liftgate Arm/Disarm Switch.............8W-39-3
Low Note Horn.......................8W-39-2
Memory Seat/Mirror Module.............8W-39-2
Message Center.......................8W-39-2
Passenger Door Ajar Switch.............8W-39-2
Passenger Door Arm/Disarm Switch.......8W-39-3
Passenger Door Lock Switch.............8W-39-3
Power Distribution Center.............8W-39-2, 5
PS01...............................8W-39-5
PS02...............................8W-39-5
PTC 1 (JB)..........................8W-39-5
Remote Keyless Entry Module...........8W-39-2
Right Rear Door Ajar Switch.............8W-39-4
Sentry Key Immobilizer Module..........8W-39-5
VTSS Lamp..........................8W-39-2
NS/GS8W - 39 VEHICLE THEFT SECURITY SYSTEM 8W - 39 - 1

8587
3086
RELAY HORN
C248C2
20A
FUSE
9
BATT A0
POWER
DISTRIBUTION
CENTER
13 12
VTSS
LAMP
CENTER MESSAGE
28FUSE10A
C35
JUNCTION
BLOCK
6C4
13C1
C2
169
BODY
CONTROL
MODULE
VTSS
LAMP
DRIVERFUSED
B (+) RELAYHORN
18
CONTROL
M1
20
PKG69
22
BK/OR
M1
20
PK
C116
MODULE MIRROR
SEAT/
MEMORY
M1
20
PK
C24
GY/OR20 X4
79C1 C148
SENSE SWITCHAJAR DRIVER
DOOR DOOR PASSENGER
AJAR
SWITCH
SENSE
DRIVER
DOOR
AJAR
SWITCH
SWITCH AJAR
DOOR PASSENGER
G75
18
TNG74
18
TN/RD
HORN NOTE
LOW HIGH
NOTE
HORN
X2
18
DG/RD
X2
18
DG/RDX2
18
DG/RD
BS19
A A
BB
Z1
18
BK
Z1
18
BK
G301
FUSED
B (+)
1 13
HORN
SWITCH CLOCKSPRING
X3
20
BK/RD
20C2
1X3
20
BK/RD
CONTROLRELAYHORN
*7 *8
* RHD
C2
3
MODULE ENTRY
KEYLESS
REMOTE
7P50
NOT
USED
M1
20
PK
M1
22
PK
(8W-10-30) (8W-10-8)
(8W-10-9)
(8W-10-10)
(8W-46-2) (8W-10-11)
(8W-12-2)
(8W-45-3)
(8W-45-7)(8W-62-3)
(8W-63-4)
(8W-15-10)
(8W-15-11)(8W-41-2) (8W-41-2)(8W-61-5) (8W-12-20)
8W - 39 - 2 8W-39 VEHICLE THEFT SECURITY SYSTEMNS/GS
J988W-3GS003902

BK/LG20 Z2
9
G400
WT/RD20 P98
6J03A
L16
LJ01 B176
WT/RD20 P98
C144SIGNALMUX LIFTGATE
BK/LG20 Z2BK/LG20 Z2Z2
20
BK/LG
2
SWITCH LOCK
DOOR PASSENGER
3
B03 D01P3
Z2
20
BK/LG
55C1
P96
20
WT/LG
4B03
D01P
P96
20
WT/LG
P96
20
WT/LG
BK/LG20 Z2
3D01D
B02
BK/LG20 Z2
G301
WT/DG20 P97
3
DRIVER
DOOR
LOCK
SWITCH
2
WT/DG20 P97
D01D B0211
WT/DG18 P97 DRIVER
BODY
CONTROL
MODULE
C145
DOOR
SWITCH
MUX
SWITCH DISARM
ARM/
LIFTGATE
1 2
2 1
12
2
1
PASSENGER
DOOR
ARM/
DISARM
SWITCH SWITCH DISARM
ARM/
DOOR
DRIVER
1 2
2 1
2 31 UNLOCK
2 LOCK 2 LOCK1 UNLOCK2 LOCK 1 UNLOCK PASSANGER
DOOR
SWITCH
MUX
MUX SWITCHDOOR DRIVER PASSANGER
DOOR
SWITCH
MUX
GROUND
(8W-15-14) (8W-61-6)
(8W-15-10)
(8W-15-11) (8W-61-6)(8W-45-6)
(8W-45-8)
NS/GS8W-39 VEHICLE THEFT SECURITY SYSTEM 8W - 39 - 3
GS003903J988W-3

TN/BK18 G78
BK20Z1
G400
SWITCH AJAR
LIFTGATE
3
1
Z1
18
BK
G301
G70
18
BR/TN
C143SENSE SWITCHAJAR HOOD
L16 J03A4
TN/BK18 G78
4B17
LJ01
SENSE SWITCHAJAR LIFTGATE
59C1
TN/BK18 G78
G302
BK18Z1BK18Z1REAR RIGHT
C177
DOOR
AJAR
SWITCH
SENSE
G76
18
TN/YL
TN/OR18 G77
2
SWITCH AJAR
HOOD
12
RIGHT
REAR
DOOR
AJAR
SWITCH
11
SWITCH AJAR
DOOR
REAR
LEFT
2
SENSE SWITCHAJAR DOOR
47C1
MODULE
CONTROL
BODY
LEFT
REAR
814 1211
(8W-15-14) (8W-15-10) (8W-15-13)(8W-45-7)
(8W-45-8)
8W - 39 - 4 8W-39 VEHICLE THEFT SECURITY SYSTEMNS/GS
J988W-3GS003904

18FUSE15A
BATT A0
12
CENTER
DISTRIBUTION
POWER
2C2
15C2
F41
20
PK/VT
20C3
PTC
1
9A
ST-RUN A21
BLOCK JUNCTION
C4
19
MODULE IMMOBILIZER
KEY
SENTRY
1F41
20
PK/VT3
F87
20
WT/BK
FUSED
B(+)FUSED
IGNITION
(ST-RUN)
CCD
BUS
(+) (-)BUS CCD
GROUND
Z2
20
BK
G200
2 56
D1
20
VT/BR
D2
20
WT/BK
TO
PS01
TO
PS02
(8W-10-20)(8W-10-8)
(8W-10-9)
(8W-12-13)(8W-10-16)
(8W-12-2)
(8W-15-4)
(8W-30-4) (8W-30-4)
NS/GS8W-39 VEHICLE THEFT SECURITY SYSTEM
BUILT-UP-EXPORT8W - 39 - 5
GS003905J988W-3

INSTALLATION
NOTE: The screws attaching the door latch to the
door end frame have nylon patches on the threads.
All screws must be replaced when the latch has
been removed.
(1) Place door latch in position on door end frame.
(2) Install screws to hold door latch to door end
frame.
(3) Insert linkage into door latch.
(4) Engage clips to hold linkage to door latch.
(5) Connect wire connector into power door lock
motor, if equipped.
(6) Insert a hex wrench through the elongated hole
located in the door shut face above the latch.
(7) Loosen allen head screw.
(8) Pull outward on the outside door handle and
release.
(9) Tighten allen head screw.
(10) Verify door latch and power door lock opera-
tion.
(11) Install water shield and front door trim panel.
FRONT DOOR LATCH STRIKER
REMOVAL
(1) Mark outline of door striker on B-pillar to aid
in installation.
(2) Remove screws holding door latch striker to
B-pillar (Fig. 19).
(3) Remove door latch striker from vehicle.
(4) Retrieve any shims found between latch striker
and B-pillar.
INSTALLATION
(1) Position latch striker and any shims retrieved
on vehicle.
(2) Loosely install screws to hold latch striker to
B-pillar.
(3) Align latch striker to outline on B-pillar made
previously.
(4) Tighten all fasteners.
(5) Verify door fit and operation. Adjust latch
striker as necessary.
FRONT DOOR LOCK CYLINDER
REMOVAL
(1) Remove front door trim panel and water shield
as necessary to gain access to the outside door han-
dle.
(2) Roll door glass up.
(3) Through access hole at rear of inner door
panel, disconnect vehicle theft Security System
(VTSS) switch connector from door harness, if
equipped.
(4) Disengage push-in fasteners holding VTSS
switch harness to inner door reinforcement bar, if
equipped.
(5) Disengage clip holding door latch linkage to
door latch.
(6) Remove latch linkage from latch.
(7) Disengage clip holding door lock linkage to
door latch.
(8) Remove lock linkage from latch.
(9) Remove nuts holding outside door handle to
door outer panel (Fig. 23).
(10) Remove outside door handle from vehicle.
(11) Disengage clip holding lock cylinder into out-
side handle (Fig. 20).
(12) Pull lock cylinder from door handle.
Fig. 19 Door Latch StrikerFig. 20 Remove Front Door Lock Cylinder
23 - 32 BODYNS
REMOVAL AND INSTALLATION (Continued)

INSTALLATION
(1) Engage clip into outside handle to hold lock
cylinder.
(2) With link arm toward rear of vehicle, push lock
cylinder into door handle until clip snaps into place
(Fig. 21).
(3) Insert lock linkage into door latch.
(4) Engage clip to hold door lock linkage to latch.
(5) Insert latch linkage into door latch.
(6) Engage clip to hold door latch linkage to latch.
(7) Install push-in fasteners to hold VTSS switch
harness to inner door reinforcement bar, if equipped.
(8) Connect VTSS switch connector into door har-
ness, if equipped.
(9) Verify door latch operation.
(10) Install water shield and door trim panel.
FRONT DOOR OUTER BELT MOLDING
REMOVAL
(1) Remove door trim panel.
(2) Roll door glass down.
(3) Using a hook tool, disengage interlocking lip at
the base of the inward edge of the belt molding (Fig.
22).
(4) Remove belt molding from door.
INSTALLATION
(1) Place belt molding in position on door.
(2) Engage interlocking lip at the base of the
inward edge of the belt molding on door panel.
(3) Install door trim panel.
FRONT DOOR OUTSIDE HANDLE
REMOVAL
(1) Remove front door trim panel and water shield
as necessary to gain access to the outside door han-
dle.
(2) Roll door glass up.(3) Through access hole at rear of inner door
panel, disconnect vehicle theft Security System
(VTSS) switch connector from door harness, if
equipped.
(4) Disengage push-in fasteners holding VTSS
switch harness to inner door reinforcement bar, if
equipped.
(5) Disengage clip holding door latch linkage to
door latch.
(6) Remove latch linkage from latch.
(7) Disengage clip holding door lock linkage to
door latch.
(8) Remove lock linkage from latch.
(9) Remove nuts holding outside door handle to
door outer panel (Fig. 23).
(10) Remove outside door handle from vehicle.
Fig. 21 Install Front Door Lock Cylinder
Fig. 22 Front Door Outer Belt Molding
Fig. 23 Front Door Outside Handle
NSBODY 23 - 33
REMOVAL AND INSTALLATION (Continued)