1996 CHEVROLET TRACKER buttons

Opening and Closing Your Sunroof
I
1. Lower your antenna and swing yow sun visors down.
2. Squeeze the front top bow latch buttons and pull the
latch back.
I I
3. Unhook the latch from the front top bow.
2-43
ProCarManuals.com

I 5.
6.
Lower the sun visors
and push both sides
of
the lock buttons on the
front latches.
7. Pull back the swing am, unfasten the five snaps that
secure the canvas
to the swing arm and remove the
canvas from the swing
arm.
Unhook the latches.
8. Return the swing arm forward and hook it securely
with the latches.
9. Pull the tension belts located above the door frame
out
through their rings.
2-50
ProCarManuals.com

AM-FM Stereo (Option)
To Play the Radio'
Turn the ON-VOL knob to turn the system on or off.
VOL: Turn this knob to adjust the volume.
RCL: Press this button to see the station being played
for a moment. Or, press it
if you want to see the time
when the ignition is off.
Finding a Station
AM-FM: Press this button to get AM or FM. The
lighted display shows your selection.
TUNE: Press the right or left arrow to go to a higher or
lower station. Press and hold to continue tuning and
release when you find your station. The display will
show the frequency of each station tuned.
SEEK: Press the right or left arrow and the radio will
tune to the next higher
or lower station and stay there.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your previously played stations.
You can
set up to
12 stations (six AM and six FM).
1. Tune in the desired station.
2. Press one of the six pushbuttons, for at least
3. The sound will mute and then return when, the station
is stored. Whenever you press that numbered button,
the station you set will return.
two seconds.
4. Repeat
the steps for each pushbutton.
3-7
ProCarManuals.com

Finding a Station
AM-FM:
Press this button to get AM, FM1 or FM2.
The lighted display shows your selection.
TUNE: Press the TUNE right or left arrow to go to a
higher or lower station. Press and hold to continue
tuning and release when you find your station. The
display will show the frequency of each station tuned.
SEEK: Press the SEEK right or left arrow and the
radio will tune to
the next higher or lower station and
stay there.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your previously played stations.
You can
set up to 18 stations (six AM, six FM1 and six FM2).
1. Tune in the desired station.
2. Press one of the six pushbuttons, for at least
two seconds.
3. The sound will mute and then return when the station
is stored. Whenever you press that numbered button,
the station you set will return.
4. Repeat the steps for each pushbutton.
PRESET SCAN: Press this button to hear each of your
favorite stations stored
on your pushbuttons for a few
seconds. When you want to stop at a chosen station,
press PRESET
SCAN again.
Setting the Tone
TREB: Turn this knob to the right to hear more treble.
BASS: Turn this control behind the TREB knob to the
right to hear more bass.
Treble and bass cannot be adjusted manually when
TONE SELECT is on.
TONE SELECT Press this button to choose preset
treble and bass equalization settings designed for
ROCK,
NEWS, POP, JAZZ and CLASSICAL.
ROCK will appear when you first press TONE
SELECT.
Each time you press it, another setting will
appear on the display.
If you press it one more time,
after CLASSICAL appears
on the display, tone control
will be back to the treble and bass knob.
3-9
ProCarManuals.com

Noise Reduction: Press the button with the double-D
symbol to remove noise from tapes encoded with
Dolby
NR.
Dolby Noise Reduction is manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol are trademarks
of Dolby
Laboratories Licensing Corporation.
EJECT Press the button with this symbol to remove
the tape and switch to radio.
TAPE: Press this button when the radio is playing to
switch to tape play.
To switch from the tape to the radio
when the tape
is playing, press the AM-FM button.
R-M: Press this button to hear the radio when you are
fast forwarding or reversing
a cassette tape. You can use
the TUNE,
SEEK and PRESET SCAN buttons while in
the radio monitor mode.
CLN: This message may appear on the display. If it
does, your cassette tape player needs to be cleaned.
It
will still play tapes, but you should clean it as soon as
possible to prevent damage to your tapes and player.
See “Care
of Your Cassette Tape Player” in the Index.
After you clean the p1ayer;press and hold EJECT for
five seconds to reset the
CLN indicator. The radio will
display
--- to show the indicator was reset.
AM-FM Stereo with Cassette Tape and
Compact Disc Player (Option)
To Play the Radio
Turn the ON-VOL knob to turn the system on or off.
VOL: Turn this knob to adjust the volume.
RCL: Press this button to see the station being played
for
a moment. Or, press it if you want to see the time
when
the ignition is off.
3-11
ProCarManuals.com

Finding a Station
AM-FM: Press this button to get AM, FM1 or FM2.
The lighted display shows your selection.
TUNE: Press the TUNE right or left arrow to go to a
higher or lower station. Press and hold to continue
tuning and release when
you find your station. The
display will show the frequency
of each stqtion tuned.
SEEK: Press the SEEK right or left arrow and the
radio will tune to the next higher or lower station and
stay there.
PUSHBUTTONS: The six numbered pushbuttons let
you return to your previously played stations. You can
set up to
18 stations (six AM, six FM1 and six FM2).
1. Tune in the desired station.
2. Press one of the six pushbuttons, for at least
two seconds.
3. The sound will mute and then return when the station
is stored. Whenever you press that numbered button,
the station
you set will return.
4. Repeat the steps for each pushbutton.
PSCAN: Press this button to hear each of your favorite
stations stored on your pushbuttons for a few seconds.
When you want to stop at a chosen station, press
PSCAN again.
Setting the Tone
TREB: Turn this knob to the right to hear more treble.
BASS: Turn this control behind the TREB knob to the
right to hear more bass. I
Treble and bass cannot be adjusted manually when
TONE SELECT is on.
TONE SELECT Press this button to choose preset
treble
and bass equalization settings designed for
ROCK,
NEWS, POP, JAZZ and CLASSICAL.
ROCK will appear when you first press TONE
SELECT. Each time you press it, another setting will
appear on the display.
If you press it one more time,
after
CLASSICAL appears on the display, tone control
will be back to the treble and bass knob.
3-12
ProCarManuals.com

4.
5.
6.
7.
8.
9.
10,
11.
Press the 1 and 4 buttons together. Hold them down
until
---- shows on the display.
Press the left or right SEEK arrow, or the left
or right
TUNE arrow and 0000 will appear on
the display.
Press the
SEEK left arrow and hold it until the first
digit
of your code appears. Release the button.
Press the
SEEK right arrow and hold it until
the second digit
of your code appears. Release
the button.
Press the TUNE left arrow and hold it until the third
digit of your code appears. Release the button.
Press
TUNE right arrow and hold it until the fourth
digit of your code appears. Release the button.
Press
AM-FM after you have checked that the code
you entered is the one you wrote down. Then, REP
will appear on the display which means you need to
repeat Steps
5 through 9,
Press AM-FM again and the display will now
show
SEC.
Disabling the Theft-Deterrent Feature
If your radio is secured (SEC shows on the display) and
you wish to disable it, enter
your security code as follows,
Dausing no more
than 15 seconds between steps. I
1.
2.
3.
4.
5.
6.
7.
Press the 1 and 4 buttons together. Hold them down
until SEC shows
on the display. You are now ready
to enter your security code.
Press the
SEEK left arrow and hold it until the first
digit
of your code appears.
Press the SEEK right arrow and hold it until the
second digit of your code appears.
Press the
TUNE left arrow and hold it until the third
digit
of your code appears.
Press the
TUNE right arrow and hold it until the
fourth digit of your code appears.
Press
AM-FM after you have checked that the code
you entered matches the one you wrote down and
0000 should now appear on the display. You will
need to repeat the above procedure.
If the code is correct, the radio will now operate. If
the code is wrong, ERR will appear on the display.
3-16
ProCarManuals.com