39-138
6 -
Shim "S3"
Note thicknessAdjustment overview Page 39
-150
7 -
Outer race for large tapered roller bearing
1) Driving out Fig. 5Pulling in Fig. 8
8 -
Inner race for large tapered roller bearing
1) Pulling off Fig. 6Pressing on Fig. 7
9 -
Drive pinion
1)
Is mated with ring gear, always replace
together as a set
Pa
ge 6 of 13 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.18
39-145
1) run at least 50 km (30 miles) Fig. 12 Measuring friction torque
A - Torque gauge, commercially available, 0-600 Ncm
B - Extension with 32 mm socket
- The following friction torques should be set:New bearings
Used bearings
1)
200-250 Ncm 30-60 Ncm
Fig. 13 Securing drive pinion nut
- Peen drive pinion nut with punch.
Pa
ge 13 of 13 Drive
pinion, removin
g, installin
g, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.18
