19-9
Coolant hose connection diagram
1 -
Lower coolant hose
From radiator to engine
2 -
Cylinder head/cylinder block
3 -
Intake manifold
4 -
Coolant line From heat exchanger to engine block
5 -
Heater core
6 -
Coolant hose To heat exchanger
7 -
Rear coolant line
8 -
Expansion tank
Pa
ge 11 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
19-13
Note (continued from page Page 19
-12
):
If for climatic reasons greater frost protection is
required, the amount of G 12 can be increased,
but only up to 60% (frost protection to about -
40 C), otherwise frost protection and cooling
effectiveness will be reduced.
If the radiator, heat exchanger, cylinder head or
cylinder head gasket is replaced, completely
replace the engine coolant.
Test coolant frost protection using T10007 special tool.
Recommended mixture ratios: 1) The quantity of coolant can vary depending upon the equipment
installed in the vehicle. Frost protection
to Anti-freeze
amount G 121)
Water 1)
-25 C (-13 F)
-35 C (-31 F)
40 %
50 % 2.5 l (2.7
qt.)
3.0 l (3.2
qt.) 3.5 l (3.7
qt.)
3.0 l (3.2
qt.)
Pa
ge 16 of 40 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.19.1
