42-108
- Remove bolts mounting brake caliper to wheel
bearing housing.
- Remove brake caliper and hang from body.
CAUTION!
Do not allow caliper to hang by brake hose.
The unsupported weight can stretch and
damage the hose
Do not loosen brake hose or lines.
- Remove brake disc.
- Mark installation position of eccentric washer for bolt (arrow -2-) for
wheel bearing housing to lower control arm ( page 42
-41
) and
remove.
- Remove wheel bearing housing to upper control arm bolt (arrow -1-).
Pa
ge 3 of 13 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.8
42-110
Wheel bearing housing, servicing
1 -
Wheel bearing housing
Do not grease bearing seat in wheel
bearing housing before pressing in wheel
bearing After replacing, check and if necessary
adjust wheel alignment
2 -
Clamping sleeve Always replaceLeft and right-sides identicalGrease all around with brake cylinder paste
before inserting into wheel bearing housingPress into wheel bearing housing until fully
seated
3 -
ABS wheel speed sensor To remove, pull outDo not install until drive axle has been
installed To install, press in by hand until fully
seated
Pa
ge 6 of 13 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.8
