44-20
Rear axle camber (front-wheel-drive
vehicles), checking
Wheel alignment specifications page 44
-11
.
The rear axle camber can be checked but not
adjusted on vehicles with front wheel drive.
If the readings are outside the allowable
tolerances the axle beam must be checked for
damage and replaced if necessary.
Pa
ge 19 of 37 Wheel ali
gnment
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.44.2
44-21
Rear axle toe (front-wheel-drive
vehicles), centering
Individual toe settings on the rear axle cannot be
adjusted.
By moving the rear axle within the elongated
holes it is possible to center the individual toe
settings.
- Loosen securing bolts on mounting brackets.
- Center individual toe settings by moving axle
beam within elongated holes at mounting
brackets.
If the overall toe setting is outside the allowable
tolerance, or if it is not possible to center the
individual settings, the axle beam must be
checked for damage and replaced if necessary.
The body alignment must also be
checked/measured in the area of the rear axle
mounting points and serviced as necessary.
Repair Manual, Body Collision Repair
Pa
ge 20 of 37 Wheel ali
gnment
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.44.2
