40-78
- Before loosening subframe, use 3393 testing mandrel to make sure
that holes -1- and -2- are aligned.
- If holes -1- and -2- are not aligned, carry out wheel alignment after
installing subframe.
Pa
ge 3 of 15 Subframe, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.7
40-83
Before tightening, 3393 testing mandrel must
be installed to align subframe to body
Notes:
Hole -1-, subframe hole -2- and aluminium bracket hole -3- must align
on both sides When installing the complete subframe, the 3393 testing mandrel can
be used to align the subframe to the body only if holes -1- and -2-
were aligned before the repairs were made. If the 3393 testing mandrel is not used when installing the subframe or
if holes -1- and -2- did not align before repairs were made a wheel
alignment will need to be carried out.
- Loosely install bolts -1- and -2-.
- Loosely install bolts -3- and -4-.
- Carry out corrosion protection measures, as needed, to holes used for
3393 testing mandrel.
Pa
ge 8 of 15 Subframe, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.7
