Page 13 of 26
42-11
      
-  Pull ABS wheel speed sensors out of mounting 
holes on both sides. 
     
-  Detach ABS wheel speed sensor wiring from 
rear axle. 
     
-  On vehicles with headlight range control remove 
linkage from axle beam. 
     
Note:  
     Use VAG1383 gearbox lifter together with 1359/2 
attachment for removing and installing the axle 
beam. 
    
-  Unbolt and remove suspension strut from axle beam.
-  Remove bolts from guide bushings (   page 42
-2 , items -3- and -5-) 
and remove axle beam. 
Pa
ge 13 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1 
     
        
        Page 14 of 26
42-12
      
Installing  
     
-  Install axle together with guide bushings into 
mounting brackets and install bolts hand-tight. 
     
-  Install suspension struts and hand-tighten 
suspension strut to axle beam bolts. 
     
-  Coat O-ring for ABS wheel speed sensor with 
brake cylinder paste. 
    
 Repair Manual, Brake System, Repair Group 46
   
 Repair Manual, Brake System, Repair Group 47    -  Push ABS wheel speed sensors into wheel bearing housings up to 
stop. 
-  Install locking plates for ABS wheel speed sensors.
-  Route parking brake cables and attach to brake calipers.
-  Connect brake lines. 
- Adjust parking brake: 
-  Install heat shield.
- Bleed brakes:
Pa
ge 14 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1 
     
        
        Page 21 of 26
42-18
 
  
10 - 
Outer wheel bearing 
Do not wash out if bearing is to be re-used
11 - 
Outer wheel bearing outer race Use copper arbor to drive outPressing in   Fig. 4Apply small quantity of wheel bearing 
grease to wheel bearing seat before 
pressing in bearing race 
12 - 
Brake disc with wheel hub 
13 - 
ABS wheel speed sensor rotor Drive off evenly using copper arbor through 
tapped holes in wheel hub Pressing in   Fig. 5
14 - 
Inner wheel bearing outer race 
Use copper arbor to drive out outer raceApply small quantity of wheel bearing 
grease to wheel bearing seat before 
pressing in bearing race 
Pa
ge 21 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1 
     
        
        Page 25 of 26
42-22
 
    
Fig. 5  Pressing in ABS wheel speed sensor rotor
    
Fig. 6  Pressing in outer race for inner wheel bearing
-  Apply small quantity of wheel bearing grease to wheel bearing seat 
before pressing in bearing race. 
Pa
ge 25 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1