20-200
Vehicles with automatic transmission
All vehicles
Note:
For vehicles with a manual transmission (no kick-down switch), the clip is
located on the cable bracket behind the front plenum. - Disconnect harness connector -2- from kick-down switch.
- Remove retaining clip -1- from the kick-down switch.
-
Twist cable positioner approx. 90 in counter-clockwise direction -
arrow 1- and pull out through the firewall side of plenum in direction of -
arrow 2- toward the engine. - Remove the accelerator pedal cable.
Pa
ge 15 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
20-202
Vehicles with automatic transmission
- Slide accelerator pedal cable -3- (with kick-down switch bracket) and
cable positioner -1- through the back and front plenum walls as shown
in illustration.
-arrow- shows installed position
- Secure kick-down switch bracket with retaining clip -2-.On engine compartment side of plenum
- Connect kick-down-switch harness connector -arrow-.
Pa
ge 17 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
