1996 AUDI A4 ECO mode

21

X DTCs reco
gnized

If control module answers with its identification the number of stored
Diagnostic Trouble Codes (DTCs) will be indicated or "No DTCs
Recognized" will be displayed.
If one or more DTCs are stored, all stored DTCs will be dis played and
printed out in sequence. Following this, VAG 1551 displays the next
address word.
VAG On Board Dia
gnostic
HELP
1 - Rapid data transfer *
)
2 - Blink code output *
)

* Operating modes 1 and 2 are displayed alternately.
Corrective action must be taken if DTCs are stored. Diagnostic report
should be attached to repair order.
Note:
For resetting service internal display and performing any emissions test
VAG 1551 must remain connected. - Automatic test sequence is ended once the readout shown here
appears in the display.
- Turn ignition OFE
Pa
ge 15 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

58

Transport locks, removing

On certain vehicle versions, blocking elements -
1- (in a luminous color) are installed in the front
suspension struts. These models are
recognizable by a tag on the mirror.

- Relieve pressure on coil spring (e.g. vehicle on
lift).

Note:
It is not necessary to remove wheels.

- Pull auxiliary spring -2- down.
- Remove 2 blocking eiements -1- fitted to each suspension strut.
Pa
ge 58 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

80

Service Reminder Indicator (SRI),
resetting


Vehicles up to model year 1997
If service date has been reached, service event
which is due appears as a flashing display after
ignition is turned ON. Flashing continues for a
few seconds after engine is started.
The following displays are possible:

OIL Engine oil change
In 1 Inspection service
In 2 Inspection service with additional work
A service event which is due is already displayed
1000 km (620 mi.) or 10 days before.
Service Reminder Indicator (SRI) must be
matched during Delivery Inspection or during
each Inspection Service to the km and time
specifications until next service event with help of
Scan Tool (ST) VAG 1551.

- Select adaptation channels individually and
enter relevant specified values.
Pa
ge 81 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

88

Resetting service interval display

Vehicles from model year 1998 The service interval display must be reset as part
of the Pre-Delivery Inspection and also after
every Oil Change Service and Inspection
Service.

Delivery inspection
The service interval display can be reset using
one of two methods:

Using the adjustment buttons for the trip
recorder and clock on the instrument cluster

- Reset "service OIL" and "service INSP" Page 92


or

Using VAG 1551 Scan Tool

- Select adaptation channel 02 and enter
adaptation value "00000" Page 89

Pa
ge 89 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6