15-83
Installing
Note:
A plastic sleeve -A- is enclosed with new valve
shaft seals.
- To prevent damage to new valve stem seals -B-, place plastic sleeve -
A- on valve stem.
- Lightly oil sealing lip of valve stem seal.
- Push valve stem seal onto plastic sleeve.
- Carefully press valve stem seal onto valve guide using presser tool
3365.
- Remove plastic sleeve again.
Note:
The large diameter of the valve keepers points upward. - If valve keepers were taken out of assembly cartridge they must first be
inserted into tool VAS 5161/18.
Pa
ge 49 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
15-86
Valve guides, checking
Special tools and equipment
Test sequence
Universal dial indicator bracket VW 387Dial indicator
Note:
Due to the slight difference in stem diameters, ensure that only an intake
valve is used in an intake guide and an exhaust valve in an exhaust
guide. - Set valve in guide. Valve stem end must be flush with guide.
Pa
ge 52 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
