Page 16 of 34
21-27
      
Test requirements:  
     
Vehicle diagnostic, testing and information 
system VAS 5051 or VAG 1551 Scan Tool 
connected. 
     
Test sequence  
     
Note:  
     The recirculating valve for turbocharger -N249- 
and the wiring connections are monitored by the 
engine control module. 
     
-  Read Diagnostic Trouble Code (DTC) memory 
of engine control module. 
      If a DTC relating to the recirculating valve for 
turbocharger -N249- is displayed:  
    
Note:  
The illustration shows bottom view of removed intake line.  -  Remove hoses of recirculating valve for turbocharger -N249- (-1-). The 
electrical connector remains plugged in. 
Location: below intake line
Pa
ge 16 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2 
     
        
        Page 17 of 34
21-28
 
    
-  Connect auxiliary hose to valve connector marked with an arrow.
-  Initiate output Diagnostic Test Mode (DTM) and activate recirculating 
valve for turbocharger -N249-. 
Output Diagnostic Test Mode Recircul. valve for turbochar
ger -N249-
    
Display:  
If the injector does not click:  
If valve does not open or close properly:  
The valve should click ... ... and must open and close (check by blowing into the auxiliary 
hose). 
-  Check internal resistance of valve.
-  Replace recirculation valve for turbocharger -N249-.
Pa
ge 17 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2 
     
        
        Page 24 of 34
21-34
      
Test requirements:  
     
Vehicle diagnostic, testing and information 
system VAS 5051 or VAG 1551 Scan Tool 
connected. 
     
Test sequence  
     
Note:  
     The Wastegate Bypass Regulator valve -N75- 
and the wiring connections are monitored by the 
engine control module. 
     
-  Read Diagnostic Trouble Code (DTC) memory 
of engine control module. 
      If a DTC relating to the Wastegate Bypass 
Regulator valve -N75 is displayed:  
     
-  Disconnect hoses from valve but leave electrical 
connector attached. 
    
-  Connect auxiliary hose to valve connector marked with an arrow.
-  Initiate output Diagnostic Test Mode (DTM) and actuate Wastegate 
Bypass Regulator valve -N75-. 
Pa
ge 24 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2 
     
        
        Page 25 of 34
21-35
 
Output Diagnostic Test Mode -N75- waste
gate b
ypass re
gulator valve
    
Display  
If the injector does not click:  
If valve does not open or close properly:  
Checking internal resistance  
The valve must click ... ... and must open and close (check by blowing into the auxiliary 
hose). 
-  Check internal resistance of valve.
-  Replace Wastegate Bypass Regulator valve -N75-.
-  Disconnect connector from valve.
    
If specified value is not attained:  
If specified value is attained:  -  Connect multimeter to injector to measure resistance.
Specified value: 25 to 35   
-  Replace Wastegate Bypass Regulator valve -N75-.
-  Check power supply. 
Pa
ge 25 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2 
     
        
        Page 27 of 34
21-37
       If the LED does not light up:  
     
-  Check wiring from contact 1 on connector via 
fuse to fuel pump relay for open circuit: 
     
       Electrical Wiring Diagrams, Troubleshooting & 
Component Locations binder        
-  Repair open circuit, if necessary
      If the LED lights up:  
     
- Check actuation.
     
Checking actuation  
    
-  Connect voltage tester VAG 1527 B to contacts 1 (positive) and 2 of 
connector. 
-  Initiate output Diagnostic Test Mode (DTM) and actuate Wastegate 
Bypass Regulator valve -N75-. 
Output Diagnostic Test Mode 
    
Display  
Pa
ge 27 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2 
     
        
        Page 31 of 34
21-40
      
Test requirements:  
     
Vehicle diagnostic, testing and information 
system VAS 5051 or VAG 1551Scan Tool 
connected. 
     
Test sequence  
     
Note:  
     The Charge Air Pressure sensor -G31- and the 
wiring connections are monitored by the engine 
control module. 
     
-  Read Diagnostic Trouble Code (DTC) memory 
of engine control module. 
      If a DTC relating to the Charge Air Pressure 
sensor -G31- is displayed:  
     
Checking power supply  
    
-  Disconnect connector -arrow- on charge pressure sender.
Pa
ge 31 of 34 Char
ge pressure leak test with VAG 1687
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.2