Page 22 of 75
69-54
 
  
Driver-side airbag unit (m.y. 1998  ), 
removing and installing 
 
WARNING! 
Follow all safety precautions when working on 
the airbag   page 69
-40
 . 
1 - 
Steering wheel 
Removing  page 69
-57
 - Secure loose cable at location indicated 
by arrow -A-. 
2 - 
Harness connector for spiral spring 
3 - 
Harness connector for airbag unit 
4 - 
Multipoint socket 
Always replace60 Nm (44 ft lb)
5 - 
Airbag unit 
6 - 
Threaded bushing 
7 - 
Torx  bolt (T30) 
8 - 
Torx  wrench (T30) 
Pa
ge 22 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 23 of 75
69-55
 
  
Removing  
WARNING! 
Follow all safety precautions when working on 
airbag  page 69
-40
 .  9 - 
Spiral spring 
10 - 
Harness connector for heated steering 
wheel 
-  Release steering wheel adjuster.
-  Pull steering wheel as far out and up as possible.
-  Place steering wheel vertical.
- 
Remove Torx  bolt (T30).- 
Turn steering wheel 1/2 turn (180 ) back and 
remove second Torx  bolt (T30). -  Pull connector - 3 - from airbag unit.
-  Place airbag unit on appropriate surface with 
impact padding facing up. 
Pa
ge 23 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 24 of 75
69-56
 
  
Installing  
WARNING! 
Make sure no one is in vehicle.  -  When installing, make sure connector audibly 
engages (clicks). 
-  Switch ignition on and connect battery Ground 
(GND) strap. 
Pa
ge 24 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 26 of 75
69-58
 
  
Driver-side airbag for sport steering wheel 
(  m.y. 1998), removing and installing
 
WARNING! 
Follow all safety precautions when working on 
airbags  page 69
-40
 . 
1 - 
Bolts to secure upper part of carrier unit 
5 Nm (44 in. lb)
2 - 
Harness connector for airbag unit 
3 - 
Airbag unit 
4 - 
Nut for steering wheel 42 Nm (31 ft lb)
5 - 
Bolts to secure lower part of carrier unit. 5 Nm (44 in. lb).
6 - 
Torx  bolt (T30) 6 Nm (53 in. lb)
7 - 
Securing cable for spiral spring 
Pa
ge 26 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 27 of 75
69-59
 
  
Removing  
Installing  
Notes: 
WARNING! 
Make sure no one is in vehicle.  8 - 
Spiral spring 
9 - 
Journal 
10 - 
Transportation protection 
 - Unbolt airbag unit from behind using 
Torx  wrench (T30). 
 - Remove airbag unit -3- and disconnect 
harness connector -2-. 
 - Place airbag unit on appropriate surface 
with impact padding facing up. 
Make sure harness connector -2- audibly 
engages (clicks). When installing airbag unit, first tighten 
right Torx  bolt. 
-  Switch ignition on and connect battery Ground 
(GND) strap. 
Pa
ge 27 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 29 of 75
69-61
 
  
Driver-side airbag for sport steering wheel 
(m.y. 1998  ), removing and installing
 
WARNING! 
Follow all safety precautions when working on 
airbags  page 69
-40
 . 
1 - 
Sport steering wheel 
Removing  page 69
-63
2 - 
Harness connector for spiral spring 
3 - 
Airbag unit 
4 - 
Multipoint socket 
Always replace60 Nm (44 ft lb)
5 - 
Torx  bolt (T30) 7 Nm (62 in. lb)
6 - 
Torx  wrench (T30) 
7 - 
Spiral spring 
Pa
ge 29 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 30 of 75
69-62
 
  
Removing  
WARNING! 
Follow all safety precautions when working on 
airbags  page 69
-40
 . 
Installing  
WARNING! 
Make sure no one is in vehicle. 
- 
Unbolt airbag unit using Torx  wrench (T30).-  Disconnect harness connector - 2 -.
-  Place airbag unit on appropriate surface with 
impact padding facing up. 
-  Make sure harness connector - 2 - audibly 
engages (clicks). 
-  Install airbag unit and tighten to 7 Nm (62 in. lb).
-  Switch ignition on and connect battery Ground 
(GND) strap. 
Pa
ge 30 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3 
         
        
        
     
        
        Page 32 of 75
69-64
 
  
Spiral spring (  m.y. 1998), removing and 
installing
 
WARNING! 
Follow all safety precautions when working on 
airbags  page 69
-40
 . 
 Repair Manual, Suspension, Wheels, Steering, 
Repair Group 48
   
-  Disconnect battery Ground (GND) strap.
-  Wheels must be facing straight ahead.
-  Remove airbag unit   page 69
-53
 .
- Remove steering wheel.-  Remove bolts -5- (4x) from carrier unit -6-.
Pa
ge 32 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3