1996 AUDI A4 lock

Select function XX
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08, and press -Q- button to confirm input.
Pa
ge 2 of 29 Readiness code
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-71

Read Measurin
g Value Block
HELP
Input display group number XXX

Indicated on display
- Press buttons -0-, -8- and -6- to input display group number 86 (086),
and press -Q- button to confirm input.
Read Measuring Value Block 86
1
2
3
4

Indicated on display (1-4 display fields)
Note:
The readiness code is generated as soon as only zeros are shown in
display field 1. - Check readiness code values in display field 1.
Specified value: 00000000
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display
If the readiness code was not generated, generate readiness code again
page 01
-73
. - Press buttons -0- and -6- to select "End Output" function 06, and press
-Q- button to confirm input.
- Check readiness code page 01
-70
. If DTC memory has been
erased, or ECM has been disconnected from B+, generate readiness
code again page 01
-73
.
Pa
ge 3 of 29 Readiness code
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-76

Step 3: Adaptation of throttle valve control
module to ECM Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08, and press -Q- button to confirm input.
Read Measuring Value Block
HELP
Input displa
y group number XXX

Indicated on display
- Press buttons -0-, -6- and -0- to input display group number 60 (060),
and press -Q- button to confirm input.
Read Measuring Value Block 60
1
2
3
4

Indicated on display (1-4 display fields) - Press -4- button to select "Basic Setting" function 04 (adaptation of
throttle valve control module to ECM)
System in Basic Setting 60
1
2
3
4

Indicated on display (1-4 display fields)
Pa
ge 8 of 29 Readiness code
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2

01-78

Step 4:

- Start engine and let run at idle.

Step 5: Oxygen Sensor (O2S) control
operating condition Rapid data transfer
HELP
Select function XX

Indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block"
function 08, and press -Q- button to confirm input.
Read Measurin
g Value Block
HELP
Input display group number XXX

Indicated on display
- Press buttons -0-, -3- and -0- to input display group number 30 (030),
and press -Q- button to confirm input.
Read Measuring Value Block 30
1
2
3
4

Indicated on display (1-4 display fields)
Pa
ge 10 of 29 Readiness code11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.01.2