24-64
Intake manifold change-over
valve, checking
Component locations page 24
-1 .
- Disconnect intake manifold change-over valve
harness connector.
If the specified value is not obtained: -
Switch multimeter (Fluke 83 or equivalent) to measure resistance ( )
and connect between terminals on valve.
Specified value: 25 to 35 ohms ( )- Replace intake manifold change-over valve.
Pa
ge 1 of 4 Intake manifold chan
ge-over valve, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.17
