28-19
Crankshaft Position (CKP)
sensor, checking
Component locations page 28
-1 .
All sensors correctly installed, securely
connected
- Disconnect (black) harness connector.
If the specified value is not obtained:
If the specified value is obtained:
If the specified value is not obtained: - Switch Fluke 83 multimeter to resistance range and connect between
CKP sensor connector terminals 1 and 2 (in connector bracket) using
jumper wires from VW 1594 test kit.
Specified value: approx.1000 - Replace Crankshaft Position (CKP) sensor.
- Connect multimeter between terminal 1 and 3 (GND), then between
terminals 2 and 3 (GND).
Specified value: infinite (open)- Replace Crankshaft Position (CKP) sensor.
Pa
ge 1 of 3 Crankshaft Position
(CKP
) sensor, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.28.5
