38-32
Installing - Pierce sealing ring using a small screwdriver and pull out.
- Coat outer circumference and gap between sealing lips with ATF.
Installation position: The open side of the sealing ring faces the
transmission.
- Slide new sealing ring onto 3385 sealing ring installer without canting
and drive in up to stop of pressure piece.
- Installing Multi-function switch page 38
-33
.
- Drive back spring dowel sleeve with transmission not yet removed in
opposite direction through the lever.
- Slide transmission shift lever onto shift rod and drive in spring dowel
sleeve.
- Installing left transmission support page 37
-125
.
Pa
ge 32 of 44 Oil
pan, oil strainer and valve bod
y, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.38.1
