39-73
- Remove three upper mounting bolts on each
driveshaft constant velocity joint.
- Loosen mounting bolts of center bearing
slightly.
- Install two 3139/2 adapters, in 3298 alignment fixture.
Note:
Never install alignment fixture onto balance plates. - Mount 3298 alignment fixture with both 3139/2 adapters and tighten
plastic nuts.
- Remove mounting bolts of flanges to transmission and to final drive as
well as mounting bolts for center bearing.
- Push driveshaft together toward final drive. CV joints can be moved
axially.
Pa
ge 7 of 10 Driveshaft, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.8
