Downloaded from www.Manualslib.com manuals search engine 40-56
The large diameter of vent chamber -A- must fit on
the larger diameter. Fig. 6 Installation position of right drive shaft
transmission end joint boot
B - Vent hole Often the boot is pushed in when installing on the
joint body. This creates a vacuum inside the boot
which draws a fold in (arrow) while driving. After
installing, lift the boot at small diameter end to
equalize pressure. Fig. 7 Joint boot, ventilating Page 56 of 82Front Wheel Suspension, Shafts and Axle12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.40.1
