Downloaded from www.Manualslib.com manuals search engine 48-39
Parts, cleaning and checking - Install tool VW 771 in the puller - Pull out sealing ring - Before assembly, the housing must be checked for contamination (paint residue, chips, dirt) and
thoroughly cleaned with compressed air and
alcohol
- Clean adhesive surface for adhesive tape in area
of the slot with solvent (e.g. L160 or alcohol)
- Check cylinder race for scoring or other damage. If scoring can be felt, replace entire steering gear
- Clean toothed rod (remove old grease in the tooth
pockets) Page 39 of 99Steering12/7/2004http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.48.1
