If E and a number appears in the radio display, an error
has occurred and the cassette
or compact disc will not
play temporarily.
If the error occurred while trying to play a cassette tape,
the following conditions may have caused the error:
1. The cassette tape is tight and the cassette player
cannot turn the hubs of the cassette tape.
2. E10 may be displayed.
Hold the cassette with the open end down and try
turning right hub counter clockwise with a pencil.
0 Flip the tape over and repeat same procedure.
If the hubs do not turn easily, your cassette tape may be
damaged and should not be used in the cassette player.
Try a new tape to make sure that your cassette player
is working properly.
If the cassette tape is broken, Ell may be displayed.
Check to see if your tape is broken.
Try a new cassette tape.
This feature may not work well with certain types of
adaptors for add-on CD players. If there is not tension
on the reels of the cassette player, it will sense that the
adaptor is a broken tape and eject it.
CLN (Clean): If this message appears on the display
when you insert your cassette tape, your cassette player
needs to be cleaned. It will still play cassette tapes, but it
should be cleaned to prevent damage to your cassette
tapes and the cassette tape player. See “Care,of Your
Cassette Tape Player” in the Index. After you: have
cleaned the cassette tape player, press and hold the
EJECT button for
5 seconds to reset the CLN indicator.
The radio will display
“---” to show that the clean
feature has been reset.
‘It
3-9
ProCarManuals.com
