1995 OLDSMOBILE SILHOUETTE child restraint

I
8. To release the child from the harness, separate the
halves
of the shoulder harness clip. Then push the
red release button in the buckle. Move the shoulder
harness straps to the side and remove
the child.
If you expect that the child will sleep while riding, a
U-shaped pillow that supports the child’s chin may be
helpful in providing additional comfort. Such devices
may be found in the child restraint section
of major
toy stores or other stores where children’s accessories
are sold.
7. Pull the shoulder harness adjustment strap (gray)
firmly until the shoulder harness straps are snug
against the child’s shoulders.
1-45
ProCarManuals.com

To Store the Built-In Child Restraint
1. Make sure that the crotch strap is held flush to the
child restraint cushion with the fastener strip. Also
be sure the shoulder harness adjustment strap (gray)
is folded up in the seat. This will allow the cushion
to fold completely into the seatback. Raise the
cushion.
L
2. Unlatch the child head restraint by pulling the release
strap. Lower the head restraint and press it firmly into
the seatback until you hear the latch click.
1-46
ProCarManuals.com

To Use as a Booster Seat
1. h11 the head restraint release strap and raise the
head restraint until
you hear the latch click.
2. Lower the child restraint cushion.
1-47
ProCarManuals.com

3. Store the 5-point child restraint harness behind the
removable pad. The pad is held in place
by fastener
strips.
,4. Place the child on the cushion and fasten the vehicle
lap-shoulder belt around the child.
belt, push the red button
on the buckle.
5. To release the child from the vehicle lap-shoulder
ProCarManuals.com

Child Restraints Top Strap
Be sure to follow the instructions for the restraint. You
may find these instructions on the restraint itself or in a
booklet,
or both. These restraints use the belt system in
your vehicle, but the child also has to be secured within
the restraint to help reduce the chance of personal injury.
The instructions that come with the infant or child
restraint will show you how to
do that.
Where to Put the Restraidt
Accident statistics show that children are safer if they
are restrained in the rear rather than the front seat. We at
General Motors therefore recommend that you put your
child restraint in the rear seat unless the child is
an
infant and you’re the only adult in the vehicle. In that
case, you might want to secure the restraint in the front
seat where you can keep an eye on the baby.
Wherever you install it, be sure to secure the child
restraint properly.
Keep in mind that an unsecured child restraint can move
around in a collision or sudden stop and injure people
in the vehicle. Be sure to properly secure any child
restraint in your vehicle
-- even when no child is in it. If
your child restraint has a top strap, it should be anchored.
Anchor brackets for the second row outside positions
are located just above the place where the third row
lap-shoulder belts meet the floor. There’s a vinyl sleeve
there; to get to the bracket, push this vinyl sleeve aside
slightly. Anchor the top strap to the bracket.
1-49
ProCarManuals.com

If you need to have an anchor bracket installed for any
additional passenger seat position, you can ask your
Oldsmobile retailer to put it in for you.
If you want to
install
an anchor bracket yourself, your retailer can tell
you
how to do it.
Once you have the top strap anchored, you’ll be ready to
secure the child restraint itself.
Securing a Child Restraint in an Outside
Seat Position
You’ll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
2. Secure the child in the child restraint as the
instructions say.
3. Pick up the latch plate, and run the lap and shoulder
portions
of the vehicle’s safety belt through or around
ProCarManuals.com

the restraint. The child restraint instructions will show
you how. Tilt the latch plate to adjust the belt
if needed.
If the shoulder belt goes
in front of the child’s fdce or
neck, put
it behind the child restraint.
4. Buckle the belt. Make sure the release button is
positioned
so you would be able to unbuckle the
safety belt quickly
if you ever had to.
5. To tighten the belt, pull up on the shoulder belt while
you push down on the child restraint.
6. Push and pull the child restraint in different
directions to be sure
it is secure.
To remove the child restraint, just unbuckle the vehicle’s
safety belt and let
it go back all the way. The safety belt
will move freely again and be ready to work for an adult
or larger child passenger.
1-31
ProCarManuals.com

Securing a Child Restraint in the Center
Seat Position
n
U
You’ll be using the lap belt. See the earlier part about
the top strap if the child restraint has one.
1. Put the restraint on the seat. Follow the instructions
for the child restraint.
2. Secure the child in the child restraint as the
instructions say.
3. Pull the lap belt all the way out without stopping.
4. While holding it out, run the belt through or around
the child restraint. The child restraint instructions
will show you how.
1-52
ProCarManuals.com