Memory Function
... ............_......_.............._...... - ...... -
The memory function
controls both the driver's seat and outside mirror
positions. First position the
seat and mirrors where you
want them. Next, press the SET button. Within five
seconds, press either the
1 or 2 button.
The seat and memory positions will be stored for the
number pressed. Repeat the procedure to store another
position with the other number if desired. To adjust the
seat and mirrors to the stored position, press the number
corresponding to the position. The memory function will
only work with
the gearshift in PARK (P).
To stop the automatic movement, move the seat bottom
switch in any direction. For easier exiting, press the
1
and 2 buttons at the same time to move the seat
completely down and back.
Lumbar Controls
... . ........._ ..........................................................
The rear lumbar control adjusts upper lumbar support;
the front control adjusts lower lumbar support.
Press the front of the switch to increase support. Press
the back of the switch to decrease support.
NOTE: The driver and passenger cannot inflate or
deflate their lumbar supports at the same time.
1-3
ProCarManuals.com
