Instrument Panel Intensity Control
INTERIOR LIGHTS TWILIGHT SENTINEL
You can brighten or dim your instrument cluster, radio and
climate control displays and control lights
by rotating the
lNTERlOR LIGHTS control between
LO and HI when
your lights are on. Rotate the control all the way to
HI and
you will turn on the interior courtesy lamps.
Twilight Sentinel
The Twilight Sentinel Does Two Things:
0 First, depending on how dark it becomes outside, the
Twilight Sentinel turns your headlamps on automatically, when they’re needed. Avoid covering
the sensor located near the windshield, by the defroster
outlet--otherwise your headlamps
will stay on.
Also, it’s possible that your headlamps might go out
if you drive from a dark area into a bright area, such
as a lighted parking lot. If this happens, turn on your
headlamps with the regular headlamp switch.
Second, to light your way when you leave your
vehicle, the Twilight Sentinel will keep your
headlamps
on for as long as three minutes.
2-42
ProCarManuals.com
AUTO-PUSH: To allow the system to automatically
control
the temperature, air distribution and Fdn speed:
1. Set the temperature you want with the colored
temperature buttons.
2. Press the AUTO-PUSH switch. The AUTO light will
appear below the selector.
To maintain proper comfort, the air flow direction
will
automatically change with increases or decreases in
outside temperature, interior temperature, or sun load.
After starting a cold engine, there may be up to a
four-minute delay before the fan is turned on. The fan
will automatically increase
in speed as the coolant
temperature rises.
AUTO FAN: Sets the fan speed. Turn this knob to the
right to raise
the fan speed, to the left to lower the fan
speed. The fan speed
will be displayed by the lights
around the knob (except
in the AUTO mode).
Use the following controls when you wish to override
the AUTO setting.
Directional Controls
When the AUTO-PUSH knob is pressed, the fan speed
will go
to AUTO unless you select a different speed.
After
you turn the knob to a directional control, the set
interior temperature
will be displayed for about five
seconds,
then the outside temperature will be displayed
"ri Upper: Directs air flow through the upper air
outlets
in the instrument panel.
f0 /I' Bi-Level: Use on cool, but sunny days. This
setting brings
in the outside air, but directs it in two
ways. The cool air is directed
to the upper portion of
your body through the instrument panel outlets, but most
warmed air is directed through the heater ducts and
a
little to the defrost and side window vents. At times, this
temperature difference may be more apparent than
others.
3-3
ProCarManuals.com
