1995 OLDSMOBILE AURORA stop start

If the light and chime come on while you are driving,
pull
off the road and stop carefully. You may notice that
the pedal is harder
to push. Or, the pedal may go closer
to the floor. It may take longer to stop. If the light is still
on, have the vehicle towed for service. (See “Towing
Your Vehicle” in
the Index.)
Parking Brake Indicator Light
p-l PARK
This light will come
on when
you set your
parking brake, and it
will stay on if your
parking brake doesn’t
release
fully. If you try
to drive
off with the
parking brake set, a
chime will also come
on until you release
the parking brake.
This light should also come on briefly as you start the
vehicle.
If it doesn’t come on then, have it fixed so it
will be ready
to remind you if the parking brake hasn’t
released
fully.
2-66
ProCarManuals.com

Anti-Lock Brake System Warning Light
ANT’- (@)
LOCK
With the anti-lock
brake system, this light
will come
on when
you start your engine
and may stay
on for
several seconds. That’s
normal. If the light
doesn’t come on, have
it fixed so it will be
ready to warn you if
there is a problem.
If the light stays on, turn the ignition off. Or, if the light
comes on when you’re driving, stop as soon as possible
and turn the ignition
off. Then start the engine again to
reset the system.
If the light still stays on, or comes on
again while you’re driving, your Aurora needs service.
If
the regular brake system warning light isn’t on, you
still have brakes, but you don’t have anti-lock brakes. If
the regular brake system warning light is also on, you
don’t have anti-lock brakes and there’s a problem with
your regular brakes. See “Brake System Warning Light’’
earlier in this part.
Traction Control System Warning Light
TRACTION
OFF
This warning light should come on briefly as you start
the engine.
If the warning light doesn’t come on then,
have it fixed
so it will be ready to warn you if there’s a
problem. If it stays
on, or comes on when you’re
driving, there may be a problem with your traction
control system and your vehicle may need service.
When this warning light
is on, the system will not limit
wheel spin. Adjust your driving accordingly.
ProCarManuals.com

The traction control system warning light may come on
for the following reasons:
0
0
0
If you turn the system off by pressing the
TRACTION CONTROL button located on
the
center console, the warning light will come on and
stay
on. To turn the system back on, press the button
again. The warning light should go
off. (See
“Traction Control System” in the Index for more
information.)
If there’s
a brake system problem that is specifically
related
to traction control, the traction control system
will turn off and the warning light will come on.
If
your brakes begin to overheat, the traction control
system will turn off and the warning light will come
on until your brakes cool down.
If the traction control system is affected
by an
engine-related problem,
the system will turn off and
the warning light will come on.
If the traction control system warning light comes on
and stays on
for an extended period of time when the
system
is turned on, your vehicle needs service.
Traction Control System Active Light
TRACTION
ACTIVE
When your traction control system is limiting wheel
spin, the TRACTION ACTIVE light will come on.
Slippery road conditions may exist if this light comes
on, so adjust your driving accordingly. The light will
stay on for a few seconds after the traction control
system stops limiting
wheel spin.
The TRACTION ACTIVE light also comes on briefly,
as a bulb check, when the engine is started. If the light
doesn’t come on then, have
it fixed so it will be there to
tell
you when the system is active.
2-68
ProCarManuals.com

PROG (Program): Press to play the other side of the
tape.
TAPE/CD: If you have a tape inserted and the radio is
playing, press TAPE/CD to play your tape. To return to
the radio while the tape is playing, press AM/FM. You
can also press TAPE/CD to switch between
a tape and a
compact disc if both are inserted. While the tape or CD
is not being played it will remain safely inside the radio
for future listening.
EJECT Press to eject the cassette tape. The radio will
then play.
To Play a Compact Disc
The CD player will play either normal-size discs or the
smaller
8 cm discs without an adapt€
With the ignition on, insert
the disc partway into the
slot, with the label side up. The player should pull
it in
and it will begin playing.
Note that when the disc is inserted, “CD’ will be
displayed. When
the disc is playing, a box will appear
around “CD’
in the display. If you select a tone setting for
your CD,
it will be activated each time you play a CD.
As each new track starts to play, the track number will
appear
in the display.
If “Err” or
“E’ and a number appear on the display at
any time, an error has occurred. See “Cassette Tape and
CD Errors” later in this section.
SEEK A/V: When you press SEEK while playing a
CD, it will go back to the start of the current track if
more than eight seconds have played. When you press
SEEK A it will search for the next higher track and stop.
SCAN: When you press SCAN while playing a CD,
you’ll hear the first few seconds of each selection. Press
SCAN again to stop on
a selection. The CD will be
muted while scanning and “SCAN” will appear on the
display.
FWD (Fast Forward): To advance a CD, press and
hold this button. While the CD advances, elapsed time
will be displayed
to help you find the desired passage.
REV (Reverse): To reverse a CD, press and hold this
button. While the CD reverses, elapsed time will be
displayed to help you find the desired passage.
ProCarManuals.com

SEEK A/V: When you press SEEK while playing a
CD, it will go back t.o the start of the current track if more
than eight seconds
have played. If you press it again, the
changer
will go to previous tracks. When you press
SEEK A it will go to the next higher track on the disc.
SCAN: When you press SCAN while playing a CD,
you'll hear
the first few seconds of each selection on the
current disc. Press SCAN again to stop on
a selection.
The
CD will be muted while scanning and "SCAN" will
appear on the display.
FWD (Fast Forward): To advance a CD, press and
hold this button. While
the CD advances, elapsed time
will be displayed to help you find the desired passage.
REV (Fast Reverse): To reverse a CD, press and hold
this button. While the CD reverses, elapsed time
will be
displayed to help you find the desired passage.
Random: Press the number 5 button to enter the random
play mode. "RDM"
will appear on the display. In the
random mode: the tracks on all loaded discs
will be
played in random order.
If you press PROG or SEEK
while "RDM" is displayed, the next disc and track will
be selected randomly. If you press SCAN while "RDM"
is displayed, discs and tracks
will be scanned randomly.
Press the number
5 button again to turn off random and
return to normal operation.
Compression: While playing a CD, press NR to turn on
compression. "COMP"
will appear on the display.
Compression makes loud and
soft passages more equal
in volume. Press NR again to turn off compression.
Cassette Tape and CD Errors
If "Err" or "E" and a number appear in the radio display,
an error has occurred and the cassette or compact disc
temporarily cannot play.
If the error occurred while trying to play a cassette tape,
the following conditions may have caused the error:
0 The cassette tape is tight and the cassette player
cannot turn the hubs of the cassette tape. "E10" may
be displayed. Hold the cassette with the open end
down and try turning the right hub counterclockwise
with a pencil. Turn the tape over and repeat.
If the
hubs do not turn easily, your cassette tape may be
damaged and should not be used
in the cassette
player. Try
a new tape to make sure your cassette
player is working properly.
The cassette tape is broken. "El 1" may be displayed.
Check to see
if your tape is broken. Try a new
cassette tape.
3-24
ProCarManuals.com

Avoid needless heavy braking. Some people drive in
spurts -- heavy acceleration followed by heavy braking
-- rather than keeping pace with traffic. This is a
mistake. Your brakes may not have time to cool between
hard stops. Your brakes will wear
out much fdster if you
do a lot of heavy braking. If you keep pace with the
traffic and allow realistic following distances, you will
eliminate a lot
of unnecessary braking. That means
better braking and longer brake life.
If your engine ever stops while you’re driving, brake
normally but don’t pump your brakes.
If you do, the
pedal may get harder to push down. If your engine
stops, you will still have some power brake assist.
But
you will use it when you brake. Once the power assist is
used up,
it may take longer to stop and the brake pedal
will be harder to push.
Anti-Lock Brakes (ABS)
Your Aurora has an advanced electronic braking system
that
will help prevent a braking skid.
ANT’- (I)
LOCK
This light on the
instrument panel
will
come on briefly when
you start your vehicle.
When you start your vehicle and begin to drive away,
you may hear a momentary motor or clicking noise. And
you may even notice that your brake pedal moves
a little
while this is going on. This is the ABS system testing
itself.
If there’s a problem with the anti-lock brake
system, the anti-lock brake system warning light will
stay
on.
See “Anti-Lock Brake System Warning Light“ in the
Index.
4-6
ProCarManuals.com

Passing
The driver of a vehicle about to pass another on a
two-lane highway waits for just the right moment,
accelerates, moves around the vehicle ahead, then goes
back into the right lane again.
A simple maneuver‘?
Not necessarily! Passing another vehicle on a two-lane
highway is a potentially dangerous move, since the
passing vehicle occupies the same lane as oncoming
traffic for several seconds.
A miscalculation, an error in
judgment, or a brief surrender to frustration or anger can
suddenly put the passing driver face to face
with the
worst of all traffic accidents
-- the head-on collision.
So here are some tips for passing:
“Drive ahead.” Look down the road, to the sides, and
to crossroads for situations that might affect your
passing patterns.
If you have any doubt whatsoever
about making a successful pass, wait for
a better time.
Watch for traffic signs, pavement markings, and lines.
If you can see a sign up ahead that might indicate a
turn or an intersection, delay your pass.
A broken
center
line usually indicates it’s all right to pass
(providing the road ahead
is clear). Never cross a solid
line on your side of the lane or a double solid line,
even
if the road seems empty of approaching traffic.
Do not get too close to the vehicle you want to pass
while you’re awaiting an opportunity. For one thing,
following too closely reduces your area
of vision,
especially
if you’re following a larger vehicle. Also,
you won’t have adequate space
if the vehicle ahead
suddenly slows or stops. Keep back
a reasonable
distance.
When it looks like a chance to pass is coming up,
start to accelerate
but stay in the right lane and don’t
get too close. Time your move
so you will be
increasing speed
as the time comes to move into the
other lane.
If the way is clear to pass, you will have a
“running start” that more than makes up for the
distance you would
lose by dropping back. And if
something happens to cause you to cancel your pass,
you need only slow down and drop back again and
wait
for another opportunity.
If other cars are lined LIP to pass a slow vehicle, wait
your turn.
But take care that someone isn’t trying to
pass you as you pull out to pass the slow vehicle.
Remember
to glance over your shoulder and check
the blind spot.
4-12
ProCarManuals.com

If your traction control system is off, then an
acceleration skid is also best handled by easing your
foot
off the accelerator pedal.
If your vehicle starts to slide, ease your foot
off the
accelerator pedal and quickly steer the way you want the
vehicle to
go. If yo11 start steering quickly enough, your
vehicle may straighten out. Always be ready for a
second skid
if it occurs.
Of course, traction is reduced when water, snow, ice,
gravel, or other material is on the road. For safety, you’ll
want to
slow down and adjust your driving to these
conditions.
It is important to slow down on slippery
surfices because stopping distance
will be longer and
vehicle control more limited.
While driving
on a surface with reduced traction, try
your best to avoid sudden steering, acceleration, or
braking (including engine braking by shifting
to a lower
gear). Any sudden changes could cause the tires
to slide.
You may not realize the surface is slippery
until your
vehicle is skidding. Learn to recognize warning clues
--
such as enough water, ice or packed snow on the road to
make a “mirrored surface”
-- and slow down when you
have any doubt.
Remember:
Any anti-lock brake system (ABS) helps
avoid only the braking skid.
Driving at Night
m
Night driving is more dangerous than day driving. One
reason is that some drivers are likely to be impaired
--
by alcohol or drugs, with night vision problems, or by
fatigue.
4-14
ProCarManuals.com