
3. 
4. 
Move  the  key to LOCK. 
Remove the key  and  take  it with  you.  If you can 
walk  away 
from your  vehicle  with  the  key  in your 
hand,  your  vehicle  is  in PARK 
(P). 
Leaving Your Vehicle  With  the  Engine 
Running (Automatic  ’Ramaxle  Models Only) 
If  you  have  to  leave  your  vehicle  with  the  engine 
running,  be  sure  your  vehicle  is  in 
PARK (P) and  your 
parking  brake  is firmly 
set before  you  leave  it. After  you’ve  moved 
the shift  lever 
into the PARK (P) 
position,  hold  the  regular  brake  pedal  down. Then,  see if 
you can move the shift lever away from PARK (P) 
without  first pushing  the  button. 
If  you  can, it means  that  the shift  lever  wasn’t  fully 
locked  into 
PARK (P). 
Torque  Lock  (Automatic  Transaxle) 
If you are parking on a hill and  you  don’t  shift  your 
transaxle  into 
PARK  (P) properly,  the weight  of the 
vehicle  may  put  too  much  force on the  parking  pawl 
in 
the  transaxle.  You  may find it diffkult to pull  the  shift 
lever  out  of  PARK 
(P). This is  called  “torque  lock.” To 
prevent  torque  lock,  set  the  parking  brake  and  then  shift 
into PARK (P) properly  before  you  leave  the  driver’s 
seat. 
To find  out  how, see  “Shifting  Into PARK  (P)” in 
the  Index. 
When  you 
are ready  to  drive,  move  the shift lever  out of 
PARK  (P) 
before you  release  the  parking  brake. 
If “torque  lock”  does  occur,  you  may  need  to  have 
another  vehicle  push  yours  a  little uphill  to  take  some  of 
the  pressure  from  the  transaxle, 
so you  can  pull  the  shift 
lever  out  of 
PARK (P). 
2-28  

Drunken  Driving 
Death and injury associated with drinking and  driving is 
a  national tragedy.  It’s the number  one contributor  to the 
highway  death toll, claiming  thousands  of victims every 
year. 
Alcohol affects  four things that  anyone needs to  drive 
a 
vehicle: 
Judgment 
0 Muscular  Coordination 
Vision 
Attentiveness 
Police records show that  almost half 
of all motor 
vehicle-related  deaths  involve  alcohol. 
In most cases, 
these  deaths  are  the result of someone  who was drinking 
and driving. 
In recent years,  some  18,000  annual motor 
vehicle-related  deaths have  been associated  with the use 
of alcohol,  with more than 300,000 people injured. 
Many adults 
-- by some  estimates,  nearly half the adult 
population 
-- choose  never to  drink  alcohol, so they 
never drive after drinking.  For persons under 2 1, it’s 
against  the law  in every 
U.S. state  to drink  alcohol. 
There  are  good medical, psychological  and 
developmental reasons  for  these  laws. 
The obvious way to solve this highway safety problem 
is  for  people never  to drink alcohol and then  drive. But 
what  if  people do? How much 
is “too  much”  if the 
driver plans to  drive? It’s 
a lot less  than  many  might 
think.  Although  it  depends 
on each person  and situation, 
here is  some general information on the problem. 
The  Blood Alcohol Concentration  (BAC) 
of someone 
who is drinking depends upon  four things: 
How much alcohol  consumed 
The drinker’s body weight 
The  amount  of food  that is consumed  before and 
during drinking 
0 The  length  of time it’s taken  the drinker  to  consume 
the  alcohol 
According 
to the American Medical Association, a 
180-pound  (82 kg) person  who  drinks  three  12-ounce 
(355 ml) bottles  of beer  in an  hour  will end up  with a 
BAC  of about 0.06 percent.  The person  would reach the 
same  BAC 
by drinking three 4-ounce  (120  nll) glasses 
of wine or three  mixed drinks if  each had 1-1/2 ounces 
(45 ml) of a liquor like whiskey, gin  or vodka. 
4-2  

Towing Your Vehicle from the  Rear Loading Your Vehicle 
8 
I NOTICE: 
Do not  tow  your  vehicle  from  the  rear.  Your 
vehicle  could  be  badly  damaged  and  the  repairs 
would  not  be  covered  by  your  warranty. 
Fm OCCUPANTS  VEHICLE  CAP. WT. 
TIRE-LOADING INFORMATION 
FRT.  CTR. 
RR. TOTAL LBS. KG 
MAX.  LOADING & GVWR  SAME AS VEHICLE 
CAPACITY  WEIGHT  XXX COLD  TIRE 
TIRE 
SIZE SPEED  PRESSURE 
RTG PSI/KPa 
FRT. 
RR. 
SPA. 
IF TIRES  ARE HOT, ADD 4PS1128KPa 
SEE OWNER’S MANUAL  FOR ADDITIONAL 
INFORMATION 
Two labels on your  vehicle show how much weight it 
may properly  carry.  The Tire-Loading  Information  label 
found  on  the  rear  edge 
of the  driver’s  door tells you the 
proper  size,  speed  rating and recommended  inflation 
pressures  for  the tires 
on your vehicle.  It also  gives  you 
important  information  about the number  of people that 
can  be in your  vehicle and the total weight that  you can 
carry.  This weight 
is called  the Vehicle  Capacity  Weight 
and  includes  the weight  of all  occupants,  cargo,  and all 
nonfdctory-installed  options. 
4-29  

f 
MFDBYGENERALMOTORSCORP DATE 
GVWR GAWR  FRT GAWR RR 
THIS  VEHICLE  CONFORMS TO ALL APPLI- 
CABLE 
U.S. FEDERAL MOTOR VEHICLE 
SAFETY,  BUMPER,  AND THEFT  PREVENTION 
STANDARDS  IN EFFECT  ON THE 
DATE OF 
MANUFACTURE  SHOWN ABOVE. 
The other  label is the Certification label, found on the 
rear  edge  of 
the driver’s  door.  It tells you  the  gross 
weight  capacity 
of your  vehicle,  called the GVWR (Gross 
Vehicle  Weight  Rating). The GVWR includes the weight 
of the vehicle,  all occupants, fuel  and cargo.  Never 
exceed  the 
GVWR for your  vehicle, or  the Gross Axle 
Weight  Rating  (GAWR)  for either the front or  rear axle.  And, 
if you 
do have a heavy load,  you should spread  it 
out. Don’t carry more than  132  lbs. 
(60 kg) in your 
trunk. 
NOTICE: 
Your warranty  does  not  cover  parts or 
components  that  fail  because  of  overloading. 
4-30  

Do not tow a trailer  if your vehicle is  equipped with the 
2.3L Quad 4 DOHC  engines  (Code D). 
Your vehicle can  tow a trailer  if it  is  equipped with the 
3.1L V6 (Code M) and proper trailer towing  equipment. 
To identify what 
the vehicle trailering capacity is  for 
your vehicle,  you should  read the information in 
“Weight  of  the Trailer” that  appears later in this  section. 
But  trailering is different than  just driving  your  vehicle 
by  itself.  Trailering means  changes in handling, 
durability, and fuel economy. Successful, safe trailering 
takes  correct  equipment, and  it has  to  be  used properly. 
That’s the reason  for  this  part. 
In it  are many 
time-tested,  important trailering  tips and safety rules. 
Many  of these  are  important  for  your safety and that  of 
your passengers. 
So please read  this section carefully 
before  you  pull  a trailer. 
Load-pulling  components  such as the  engine,  transaxle, 
wheel assemblies,  and tires are forced  to work harder 
against  the  drag  of the  added  weight.  The  engine  is 
required  to  operate  at relatively higher  speeds and under 
greater loads, generating  extra  heat. What’s more,  the 
trailer  adds considerably  to wind resistance, increasing 
the pulling requirements. 
If You Do Decide To Pull A Trailer 
If you  do, here are  some important points. 
0 There  are  many different  laws, including speed  limit 
restrictions, having 
to do  with  trailering.  Make  sure 
your rig will be  legal, not only where  you live but 
also  where  you’ll be driving. 
A good source  for this 
information can  be  state or provincial police. 
0 Consider using  a sway  control. 
You  can ask 
a hitch  dealer  about sway controls. 
0 
0 
0 
Don’t tow  a trailer  at all  during  the first 1000 miles 
(1 600 km) your new vehicle  is  driven. Your engine, 
axle  or other  parts could  be damaged. 
Then,  during  the first 
500 miles (800 km) that  you 
tow  a trailer, don’t  drive  over 
50 mph (80 km/h) and 
don’t  make  starts  at  full  throttle. This helps your 
engine  and other  parts 
of your vehicle wear  in at  the 
heavier  loads. 
Obey speed limit restrictions  when towing  a trailer. 
Don’t  drive faster than the maximum posted speed 
for  trailers  (or no more than 
55 mph (90 km/h)) to 
save  wear on your vehicle’s parts. 
4-32  

Three  important  considerations have to do  with weight: 
Weight of the  Trailer 
How  heavy  can  a  trailer  safely be? 
It  should never weigh  more than 
1,000 pounds  (450  kg). 
But even that  can  be  too heavy. 
It  depends 
on how you plan  to use  your  rig. For 
example,  speed,  altitude,  road grades,  outside 
temperature  and how much  your  vehicle 
is used to pull  a 
trailer  are all important.  And,  it can also  depend  on  any 
special  equipment  that 
you have on your  vehicle. 
You  can ask your retailer  for our trailering  information 
or  advice,  or you  can  write  us at: 
Oldsmobile  Customer  Assistance  Center 
P.O. Box  30095 
Lansing,  MI  48909 
In  Canada,  write to: 
General  Motors 
of Canada  Limited 
Customer  Assistance  Center  1908  Colonel  Sam  Drive,  Oshawa 
Ontario 
L 1 H 8P7. 
Weight of the  Trailer  Tongue 
The  tongue  load (A) of any trailer is an  important 
weight  to measure  because  it  affects the total capacity 
weight 
of your vehicle.  The capacity  weight  includes  the 
curb  weight 
of the vehicle,  any  cargo you may  carry  in 
it,  and 
the people  who  will be riding in the vehicle.  And 
if 
you will tow  a trailer,  you must subtract the tongue 
load  from  your vehicle’s  capacity weight because your 
vehicle  will be  carrying  that weight,  too. See “Loading 
Your  Vehicle”  in the  Index  for more information  about 
your vehicle’s maximum  load capacity. 
A B 
4-33  

If you’re using a “dead-weight”  hitch, the trailer tongue 
(A) should  weigh 10% of the total loaded trailer weight 
(B). If you have a “weight-distributing”  hitch, the trailer 
tongue 
(A) should  weigh 12% of the total loaded trailer 
weight 
(B). 
After you’ve  loaded your trailer, weigh the trailer and 
then the tongue, separately, to see if the weights are 
proper.  If they aren’t,  you  may be able to  get them right 
simply  by moving  some  items  around in the trailer. 
Total Weight on Your Vehicle’s Tires 
Be  sure  your vehicle’s tires  are inflated  to the 
recommended pressure  for cold tires.  You’ll find these 
numbers  on 
the Certification label  at the  rear  edge of the 
driver’s door  or  see  “Loading  Your Vehicle” 
in the 
Index. Then be sure 
you don’t go  over the GVW limit 
for your vehicle. including the weight  of the trailer 
tongue. 
Hitches 
It’s  important to have the correct hitch equipment. 
Crosswinds, large trucks going  by, and rough roads  are  a 
few reasons  why you’ll  need the right hitch. Here  are 
some  rules to  follow: 
0 
0 
Will  you  have to maKe  any holes  in the body of your 
vehicle when  you install  a trailer hitch?  If  you do, 
then  be sure  to seal the holes later  when  you remove 
the hitch. 
If you  don’t  seal them, deadly carbon 
monoxide (CO) from your  exhaust can get into your 
vehicle (see “Carbon Monoxide”  in the Index). 
Dirt 
and  water  can, too. 
The  bumpers 
on your vehicle  are not  intended for 
hitches. 
Do not  attach rental hitches  or other 
bumper-type  hitches to them. Use only 
a 
frame-mounted  hitch that  does not attach to the 
bumper. 
4-34  

Safety  Chains 
You should  always  attach chains  between  your vehicle 
and  your trailer.  Cross the safety  chains under the tongue 
of  the  trailer 
so that the  tongue will not drop  to the  road 
if  it becomes  separated from  the hitch. Instructions 
about  safety  chains  may be provided by the hitch 
manufacturer  or by  the  trailer  manufacturer. Follow the 
manufacturer’s  recommendation  for  attaching  safety 
chains  and do not attach them  to the bumper.  Always 
leave  just enough  slack 
so you can turn  with your rig. 
And, never allow safety  chains  to  drag on the ground. 
Trailer  Brakes 
Does your trailer have  its  own brakes‘! 
Be  sure  to  read and follow  the instructions  for  the trailer 
brakes 
so you’ll  be able  to install,  adjust  and maintain 
them properly.  And because  you have  anti-lock  brakes, 
do  not  try 
to tap  into  your  vehicle’s brake  system. If  you 
do,  both  brake  systems  won’t work well, 
or at all. 
Driving  with  a  Trailer 
Towing a trailer  requires a certain  amount  of experience. 
Before  setting out for the open  road, you’ll  want 
to get 
to know 
your rig.  Acquaint  yourself with the feel of 
handling  and braking  with the added weight  of the  trailer. 
And always  keep in mind that the vehicle  you are 
driving  is  now 
a good deal longer  and  not  nearly as 
responsive  as  your vehicle is by  itself. 
Before  you start,  check 
the trailer hitch  and platform 
(and  attachments),  safety chains,  electrical  connector, 
lamps,  tires and mirror  adjustment.  If the trailer has 
electric  brakes, start  your vehicle and trailer  moving  and 
then apply the trailer brake controller by hand to  be  sure 
the brakes  are  working.  This  lets you  check your 
electrical  connection  at the  same  time. 
During your trip,  check occasionally  to  be sure  that the 
load is secure, and that the  lamps and any trailer brakes 
are  still  working. 
Following  Distance 
Stay  at least twice  as  far behind  the vehicle ahead as you 
would  when driving  your  vehicle without  a trailer.  This 
can help  you avoid  situations  that require heavy braking 
and  sudden  turns. 
Passing 
You’ll need more passing distance up ahead  when 
you’re  towing 
a trailer. And, because you’re  a good deal 
longer, you’ll need to  go much  farther  beyond  the 
passed vehicle  before you can return to your  lane. 
4-35