1995 LAND ROVER DISCOVERY service

86ELECTRICAL
28
REPAIR INSTRUMENT PANEL FINISHER
Service repair no - 88.20.03
Remove
1.Position steering wheel for access.
2.Remove 2 screws securing panel.
3.Lift panel clear, disconnect multiplug
connections.
Refit
4.Reverse removal procedure.

ELECTRICAL
29
REPAIR INSTRUMENT BINNACLE
Service repair no - 88.20.13
Remove
1.Remove instrument panel finisher.
See
Instrument panel finisher
2.Remove 4 screws securing binnacle to fascia.
3.Carefully ease 2 lower panel finisher brackets
downwards.
4.Withdraw binnacle to gain access to multiplugs.
5.Noting their fitted positions, disconnect
multiplugs.
6.Remove binnacle.
Refit
7.Reverse removal procedure.

86ELECTRICAL
30
REPAIR INSTRUMENT ILLUMINATION AND WARNING
LIGHT BULBS
Service repair no - 86.45.48 - Instrument
Service repair no - 86.45.61 - Warning light
Remove
1.Remove binnacle.
See Instrument binnacle
2.Identify bulb to be replaced.
NOTE: If faulty bulb is not accessible,
remove screws securing circuit board and
carefully ease circuit board aside.
3.Rotate bulb holder anti-clockwise, withdraw bulb
holder and remove bulb.Refit
4.Fit new bulb to holder.
CAUTION: Ensure bulb of correct wattage
and type is fitted.
5.Reverse removal procedure.

ELECTRICAL
31
REPAIR MAIN PRINTED CIRCUIT
Service repair no - 88.20.19
Remove
1.Remove instrument cowl.
See Instrument
cowl and illumination board
2.Remove circuit board.See Circuit board
3.Remove illumination and warning lamp bulbs.
4.Remove 13 screws securing main printed circuit,
remove circuit.
Refit
5.Position main printed circuit to binnacle.
6.Ensure screw holes in instruments are aligned
with holes in binnacle, fit and tighten screws.
7.Reverse removal procedure. 1 and 2.

86ELECTRICAL
32
REPAIR CIRCUIT BOARD
Service repair no - 88.20.25
Remove
1.Remove binnacle.
See Instrument binnacle
2.Remove screw, release lower cover from circuit
board.
3.Remove 2 screws securing circuit board to
binnacle, release board.
4.Disconnect multiplug.
Refit
5.Reverse removal procedure.

ELECTRICAL
35
REPAIR INSTRUMENT COWL AND ILLUMINATION BOARD
Service repair no - 88.20.06 - Instrument cowl
Service repair no - 88.20.22 - Illumination board
Remove
1.Remove binnacle,
See Instrument binnacle
Instrument cowl
2.Remove bulb holder from binnacle.
3.Release 4 clips securing top of cowl to binnacle.
4.Release 3 clips securing bottom of cowl to
binnacle, remove cowl.
Illumination board
5.Release bulb holder wires from clip.
6.Remove screw securing illumination board to
cowl, remove board.Refit
Illumination board
7.Position illumination board to cowl, fit and tighten
screw.
8.Secure bulb holder wires in clip.
Instrument cowl
9.Ensure instrument face plate is correctly
positioned.
10.Position cowl to binnacle ensuring speedometer
trip passes through hole in cowl.
11.Secure cowl retaining clips.
12.Fit bulb holder in binnacle.
13.Fit binnacle.
See Instrument binnacle

86ELECTRICAL
36
REPAIR SPEEDOMETER
Service repair no - 88.30.01
Remove
1.Remove instrument cowl.
See Instrument
cowl and illumination board
2.Remove speedometer trip reset button sleeve.
3.Remove instrument face plate.
4.Remove 4 screws securing speedometer,
remove speedometer.
Refit
5.Reverse removal procedure.TACHOMETER
Service repair no - 88.30.21
Remove
1.Remove circuit board.
See Circuit board
2.Remove instrument cowl.See Instrument
cowl and illumination board
3.Remove speedometer trip reset button sleeve.
4.Remove instrument face plate.
5.Remove 3 screws securing tachometer to
binnacle, remove tachometer.
Refit
6.Reverse removal procedure.

ELECTRICAL
37
REPAIR COOLANT TEMPERATURE AND FUEL GAUGES
Service repair no - 88.25.14 - Coolant temperature
gauge
Service repair no - 88.25.26 - Fuel gauge
Remove
1.Remove instrument cowl.
See Instrument
cowl and illumination board
2.Remove speedometer trip reset button sleeve.
3.Remove instrument face plate.
Coolant temperature gauge
4.Remove circuit board,See Circuit board
5.Remove 3 screws securing coolant temperature
gauge to binnacle, remove gauge.
Fuel gauge
6.Remove 3 screws securing fuel gauge to
binnacle, remove gauge.
Refit
7.Reverse removal procedure.SPEEDOMETER TRANSDUCER
Service repair no - 88.30.14
Remove
1.Position vehicle on ramp and chock wheels.
2.Raise ramp.
3.Disconnect multiplug from transducer.
4.Remove bolt securing transducer, remove
transducer.
Refit
5.Reverse removal procedure.