1995 CHEVROLET TAHOE mileage

Downloaded from www.Manualslib.com manuals search engine I Maintenance Schedule II - Diesel Engines
(Continued)
0
0
0
Inspect shields and underhood insulation for damage or looseness.
Adjust or replace as required.
This is a Noise Emission Control
Service. Applicable only
to vehicles sold in the United States.
Check the air intake system installation to assure that gaskets are
properly sealed and that all hose connections, fasteners and other
components are tight. Also check to
be sure that the air cleaner housing
is properly seated, the cover fits tightly and the wing nuts are tight.
Tighten connections and fasteners or replace damaged parts as
necessary.
This is a Noise Emission Control Service. Applicable only
to vehicles sold in the United States.
If your engine has a thermostatically controlled cooling fan, inspect all
hoses and ducts for proper hook-up (or every
12 months, whichever
occurs first). Be sure the valve works properly.
This is a Noise
Emission Control Service. Applicable only to vehicles sold in the
United States.
Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
DATE ACTUAL MILEAGE SERVICED BY: L
L L
45,000 Miles (72 000 km)
0 Change engine oil and filter (or every 3 months, whichever occurs
first).
An Emission Control Service.
0 Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball
joints and king pin
bushings should
not be lubricated unless their temperature is 10" F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each of the listed lubrication service items at this mileage
interval
(or every 12 months, whichever occurs first).
(Continued)
7-87

Downloaded from www.Manualslib.com manuals search engine (Colltinued)
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. See “Tires”
in the Index.
0 Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
‘g‘k
DATE
SERVICED BY: ACTUAL MILEAGE
50,000 Miles (80 000 km)
0 Change engine oil and filter (or every 3 months, whichever occurs
first).
An Emission Control Service.
0 Lubricate the front suspension, king pin bushings, steering linkage,
transmission
shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and
clutch pedal springs. Ball joints and king pin
bushings should not be lubricated unless their temperature is
10” F
(-12” C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of the listed lubrication service items at this mileage
interval (or every
12 months, whichever occurs first).
0 Change automatic transmission fluid and filter if the vehicle is mainly
driven under
one or more of these conditions:
In heavy city traffic where the outside temperature regularly
reaches
90°F (32°C) or higher.
In hilly or mountainous terrain.
When doing frequent trailer towing.
0 Uses such as found in taxi, police or delivery service. If you do
not use your vehicle under any
of these conditions, the fluid
and filter do not require changing.
Manual transmission fluid
doesn’t require change.
(Continued)
7-88

Downloaded from www.Manualslib.com manuals search engine 1 Maintenance Schedule II - Diesel Engines I
(Continued)
0 Inspect shields and underhood insulation for damage or looseness.
Adjust or replace
as required. This is a Noise Emission Control
Service. Applicable only to vehicles sold in the United States.\

0 Check the air intake system installation to assure that gaskets are
properly sealed and that
all hose connections, fasteners and other
components are tight.
Also check to be sure that the air cleaner housing
is properly seated, the cover fits tightly and the wing nuts are tight.
Tighten connections and fasteners or replace damaged parts as
necessary.
This is a Noise Emission Control Service. Applicable only
to vehicles sold in the United States.
0 If your engine has a thermostatically controlled cooling fan, inspect all
hoses and ducts for proper hook-up (or every
12 months, whichever
occurs first).
Be sure the valve works properly. This is a Noise
Emission Control Service. Applicable only to vehicles sold in t\
he
United States.
0 Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
DATE SERVICED BY: ACTUAL MILEAGE
55,000 Miles (88 000 km)
0 Change engine oil and filter (or every 3 months, whichever occurs
first).
An Emission Control Service.
0 Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs.
Ball joints and king pin
bushings should
not be lubricated unless their temperature is 10" F
(-12" C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or
they could be damaged.
Perform each
of the listed lubrication service items at this mileage
interval (or every
12 months, whichever occurs first).
(Continued)
7-89

Downloaded from www.Manualslib.com manuals search engine (Continued)
0 Rotate tires. See “Tire Inspection and Rotation” in the Index for proper
rotation pattern and additional information. See “Tires” in the Index.
0 Check readfront axle fluid level and add fluid as needed. Check
constant velocity joints and axle seals for leaking.
**
60,000 Miles (100 000 km)
0 Change engine oil and filter (or every 3 months, whichever occurs
0 Lubricate the front suspension, king pin bushings, steering linkage,
transmission shift linkage, transfer case shift linkage, parking brake
cable guides, rear driveline center splines, front axle propshaft splines,
brake pedal springs and clutch pedal springs. Ball joints and king pin
bushings should
not be lubricated unless their temperature is 10” F
(-12” C), or higher. When weather is cold, let the ball joints and king
pin bushings warm up before lubrication or they could be damaged.
Perform each
of the listed lubrication service items at this mileage
interval (or every
12 months, whichever occurs first).
0 Drain, flush and refill the cooling system with new coolant (or every 24
months, whichever occurs first). See “Engine Coolant” in the Index for
what to use.
An Emission Control Service.
Also inspect the hoses and replace them if they are cracked, swollen or
deteriorated. Tighten all hose clamps (except constant tension clamps).
Remove debris and clean the outside of
the radiator and air
conditioning condenser. Wash
the radiator neck. To ensure proper
operation, pressure test
the radiator and cap.
first).
An Emission Control
Service.
(Continued)
7-90

Downloaded from www.Manualslib.com manuals search engine STEP TWO - If after contacting a member of dealership management, it
appears your concern cannot be resolved by the dealership without further
help, contact the Chevrolet Customer Assistance Center
by calling
1-800-222-1020. In Canada, contact GM of Canada Customer Assistance
Center in Oshawa by calling 1-800-263-3777 (English) or
1-800-263-7854 (French).
In Mexico, call (525) 254-3777. In Puerto Rico, call 1-800-496-9992
(English) or 1-800-496-9993 (Spanish). In the
U.S. Virgin Islands, call
1-800-496-9994. In other overseas locations, contact
GM North American
Export Sales
in Canada by calling 1-905-644-41 12.
For prompt assistance, please have the following information available
to
give the Customer Assistance Representative:
Your name, address, home and business telephone numbers
0 Vehicle Identification Number (This is available from the vehicle
registration or title, or the plate at
the left top of the instrument panel
and visible through the windshield.)
Dealership name and location
0 Vehicle delivery date and present mileage
Nature of concern
We encourage you to call the toll free number listed previously in order to
give your inquiry prompt attention. However,
if you wish to write
Chevrolet, write to:
Chevrolet Motor Division
Chevrolet Customer Assistance Center
P. 0. Box 7047
Troy, MI 48007-7047
Refer to your Warranty and Owner Assistance Information booklet for
addresses
of Canadian and GM Overseas offices.
When contacting Chevrolet, please remember that
your concern will likely
be resolved in the dealership, using the dealership’s facilities, equipment
and personnel. That is why we suggest you follow Step One first
if you have
a concern.
8-2

Downloaded from www.Manualslib.com manuals search engine ‘To file a claim, you will be asked to provide your name and address, your
Vehicle Identification Number (VIN), and
a statement of the nature of your
complaint. Eligibility is limited by vehicle age and mileage, and other
factors.
We prefer you utilize the Customer Satisfaction Procedure before you resort
to AUTO LINE, but
you may contact the BBB at any time. The BBB will
attempt to resolve
the complaint serving as an intermediary between you
and Chevrolet. If this mediation is unsuccessful, an informal hearing will be
scheduled where eligible customers may present their case to an impartial
third-party arbitrator.
The arbitrator will make a decision which you may accept or reject. If you
accept the decision, GM will be bound by that decision. The entire dispute
resolution procedure should ordinarily take about forty days from the time
you file a claim until a decision is made.
Some state laws may require you
to use this program before filing a claim
with a state-run arbitration program or in the courts. For further
information, contact the BBB at
1-800-955-5 100 or the Chevrolet
Customer Assistance Center at 1-800-222-1
020.
REPORTING SAFETY DEFECTS TO THE
UNITED STATES GOVERNMENT
If you believe that your vehicle has a defect which could cause a crash or
could cause injury
or death, you should immediately inform the National
Highway Traffic
Safety Administration (NHTSA), in addition to notifying
General Motors.
If NHTSA receives similar complaints,
it may open an investigation, and if
it finds that
a safety defect exists in a group of vehicles, it may order a recall
and remedy campaign. However, NHTSA cannot become involved
in
individual problems between you, your dealer, or General Motors.
To contact NHTSA,
you may either call the Auto Safety Hotline toll-free at
1-800-424-9393 (or 366-0123 in
the Washington, D.C. area) or write to:
NHTSA, U.S. Department of Transportation
Washington, D.C. 20590
You can also obtain other information about motor vehicle safety from the
Hotline.
8-4

Downloaded from www.Manualslib.com manuals search engine Telephone number where you can be reached
Vehicle mileage
0 Description of the problem
For complete program details, see your Chevrolet/Geo dealer to obtain a
Roadside Assistance Center brochure.
Canadian Roadside Assistance
Vehicles purchased in Canada have an extensive Roadside Assistance
program accessible from anywhere in Canada or
the U.S.A. Please refer to
the separate brochure provided by the dealer or call 1-800-268-6800 for
emergency services.
Courtesy Transportation
ChevroletIGeo offers Courtesy Transportation for customers needing
warranty service. Courtesy Transportation will be offered in conjunction
with the coverage provided by the BUMPER TO
BUMPER New Vehicle
Limited Warranty
to retail purchasers of 1995 Chevrolet/Geo passenger car
and light duty trucks (please see your selling dealer for details).
Courtesy Transportation includes:
One way SHUTTLE RIDE for any warranty repair completed during
the same day.
Up to $30 maximum daily VEHICLE RENTAL allowance for any
overnight warranty repair up
to 5 day, OR
0 Up to $30 maximum daily CAB, BUS, or OTHER transportation
allowance in
lieu of rental for any overnight warranty repair up to
5 day, OR
0 Up to $10 daily FUEL allowance for rides provided by another person
(Le., friend, neighbor, etc.) in lieu
of rental for any overnight warranty
repair up to
5 days.
Note: All Courtesy Transportation arrangements will be administered
by your Chevrolet/Geo dealership service management. Claim
amounts should reflect
all actual costs.
The Chevrolet/Geo Courtesy Transportation Program is not part of the
BUMPER
TO BUMPER New Vehicle Limited Warranty.
Chevrolet/Geo reserves the right to make any changes or discontinue
the Courtesy Transportation Program at any time without notification.
For additional program details contact your Chevrolet/Geo dealer.
In Canada, please consult your GM dealer for information on courtesy
transportation.
8-7