Page 35 of 340

a
a
Your vehicle is equipped with a diagnostic module,
which records information about the air bag system.
The module records information about the readiness
of the system, when the sensors are activated and
driver’s safety belt usage at deployment.
Let only qualified technicians work on your
air bag
system. Improper service can mean that your air bag
system won’t work properly. See your dealer for
service.
I NOTICE:
If you damage the cover for the driver’s or the
right front passenger’s air bag, they may not
work properly.
You may have to replace the air
bag module in the steering wheel or both the air
bag module and the instrument panel for the
right front passenger’s air bag.
Do not open or
break the air bag covers.
Servicing Your Air Bag-Equipped Buick
Air bags affect how your Buick should be serviced.
There
are parts of the air bag system in several places
around your vehicle. You don’t want the system
to
inflate while someone is working on your vehicle. Your
Buick dealer and the 1995 Regal Service Manual have
information about servicing your vehicle and the air bag
system.
To purchase a service manual, see “Service
Publications” in the Index.
The air bag system does not need regular maintenance.
I I
1-23
ProCarManuals.com
Page 36 of 340
Safety Belt Use During Pregnancy
Safety belts work for everyone, including pregnant
women. Like all occupants, they are more likely to be
seriously injured if they don’t wear safety belts.
A pregnant woman should wear a lap-shoulder belt, and
the lap portion should be worn as low as possible
throughout the pregnancy. The best
way to protect the fetus
is to protect the
mother. When
a safety belt is worn properly, it’s more
likely that the fetus won’t
be hurt in a crash. For
pregnant women, as for anyone, the key to making
safety belts effective is wearing them properly.
Right Front Passenger Position
The right front passenger’s safety belt works the same
way as the driver’s safety belt. See “Driver Position,”
earlier
in this section.
When the shoulder belt is pulled out all the way, it will
lock. If
it does, let it go back all the way and start again,
Center Passenger Position
1-24
ProCarManuals.com
Page 37 of 340
Lap Belt
If your vehicle has a bench seat, someone can sit in the
center position.
To make the belt shorter, pull its free end as shown until
the belt is snug.
When
you sit in a center seating position, you have a lap
safety belt, which has
no retractor. To make the belt
longer, tilt the latch plate and pull
it along the belt. Buckle,
position and release it the same way
as the lap
part
of a lap-shoulder belt. If the belt isn’t long enough,
see “Safety Belt Extender’’ at the end
of this section.
Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt quickly
if
you ever had to.
1-25
ProCarManuals.com
Page 38 of 340
Rear Seat Passengers Rear Seat Outside Passenger Positions
It’s very important for rear seat passengers to buckle up! (2-Door Models)
Accident statistics show that unbelted people in the rear
seat are hurt more often in crashes than those who are
wearing safety belts. n
Rear passengers who aren’t safety belted can be thrown
out
of the vehicle in a crash. And they can strike others
in the vehicle who are wearing safety belts.
U
If you have a four-door model, see “Rear Seat Outside
Passenger Positions (4-DOOr Models)” later in this
section.
ProCarManuals.com
Page 39 of 340
Lap-Shoulder Belt (2-Door Models)
The positions next to the windows have lap-shoulder
belts. Here’s how to wear one properly.
1. Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
2. Push the latch plate into the buckle until it clicks. If
the belt stops before it reaches the buckle, tilt the latch
plate and keep pulling until
you can buckle it.
Pull up on the latch plate to make sure it is secure.
If the belt
is not long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button
on the buckle is positioned so you would
be able to unbuckle the safety belt quickly
if you ever
had to.
ProCarManuals.com
Page 40 of 340
3. To make the lap part tight, pull down on the buckle
end of the belt as you pull up
on the shoulder part.
The lap part of the belt should be worn low and snug on
the hips, just touching the thighs. In a crash, this applies
force to the strong pelvic bones. And you'd be less
likely to slide under the lap belt.
If you slid under it, the
belt would apply force at your abdomen. This could
cause serious
or even fatal injuries. The shoulder belt
should go over the shoulder and across
the chest. These
parts
of the body are best able to take belt restraining
forces.
The safety belt locks if there's a sudden stop or a crash.
1-28
ProCarManuals.com
Page 41 of 340
To unlatch the belt, just push the button on the buckle.
If you have a two-door model, see “Rear Seat Outside
Passenger Positions
(2-Door Models)” earlier in this
section.
Lap-Shoulder Belt (4-hOr Models)
The positions next to the windows have lap-shoulder
belts. Here’s how to wear one properly.
1-29
ProCarManuals.com
Page 42 of 340
1. Pick up the latch plate and pull the belt across you.
Don’t let it get twisted.
The shoulder belt may lock
if you pull the belt across
you very quickly. If this happens, let the belt go back
slightly
to unlock it. Then pull the belt across you
more slowly.
2. Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
When the shoulder belt
is pulled out all the way, it
will lock.
If it does, let it go back all the way and
start again.
If the belt is not long enough, see “Safety Belt
Extender” at the end
of this section.
Make sure the release button
on the buckle is
positioned
so you would be able to unbuckle the
safety belt quickly if
you ever had to.
1-30
ProCarManuals.com