39-8
7 -
O-ring
Always replace
8 -
Circlip
9 -
Spring plate Mark installation position when removing:
larger diameter (concave side) toward
shims - 10
10 -
Shims
11 -
Spring
12 -
Oil drain plug, 40 Nm
Pa
ge 4 of 10 Seal and
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.3
39-13
- Lightly oil outer circumference of seal -B-.
- Fill space between sealing lips and dust lips with sealing grease G52
128 A1.
- Fit seal with shim -A-, Part No. 016 311 391 B (1.7 mm thick) onto
punch 2005.
Installation position: open side of seal toward transmission.
- Drive in seal for drive flange.
- Remove shim after driving in.
Pa
ge 9 of 10 Seal and
grooved ball bearin
g for flan
ge for driveshaft on transmission, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.3
