24-147
Note:
The control module can abort adaptation for the
following reasons:
Throttle valve cannot be closed completely (e.g.
contamination)
Battery voltage is too low.
Throttle valve control module or wire connection
is faulty.
Engine is started during adaptation or
accelerator pedal is operated.
Tension of throttle valve housing (check
bolts)
After termination, tester displays "Function is
unknown or cannot be performed at the
moment". The next time the ignition is switched
on (several seconds), adaptation will be
automatically repeated.
- End basic adjustment of the engine by pressing
the key.
Rapid data transfer
HELP
Indicated on display (function selection):
Pa
ge 19 of 41 Electronic en
gine
power control
(E-Gas
), checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.24.5
