1995 AUDI A4 diagram

24-102

Read measuring value block 4 1 2 3 4

Indicated on display; note display field 4
Notes:
Due to its short signal duration, shifting cannot always be observed on the
VAG 1551 scan tool.
CAUTION!
Do not use the shift inputs (identified by an X) during the shift signal
check.
If the change in the shift signal display did not occur, even though the
control module coding was OK: Specified value: XXX_X0
Shift value must increase briefly during shifting.
Specified value: XXX_X1
-
Press button.
- Select "End Output" function 06.
- Press -Q- button to confirm input.
- Connect VAG 1598/19 test box to ECM harness connector page 01
-
255
.
- Check wiring for open or short circuit between ECM and TCM, using
wiring diagram.
Pa
ge 27 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

24-106

- Switch ignition ON.

- Using VAG 1551 scan tool, select "Read
Measuring Value Block" function 08, display
group 027, display field 1 page 01
-249
.
Read measuring value block 27 1 2 3 4

Indicated on display; note display field 1
If the specified value is not obtained, even though coding is OK: Specified value: 0
- Start engine and let idle.
Specified value: 1
-
Press button.- Select "End Output" function 06.
- Press -Q- button to confirm input.
- Connect VAG 1598/19 test box to ECM harness connector page 01
-
255
.
- Check wiring for open or short circuit between ECM and TCM, using
wiring diagram.
Pa
ge 31 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

24-108

- Switch ignition ON.

- Using VAG 1551 scan tool, select "Read
Measuring Value Block" function 08, display
group 027, display field 2 page 01
-249
.
Read measuring value block 27 1 2 3 4

Indicated on display; note display field 2
If the specified value is not obtained, even though coding is OK: Specified value: 0
- Start engine and let idle.
Specified value: 1
-
Press button.- Select "End Output" function 06.
- Press -Q- button to confirm input.
- Connect VAG 1598/19 test box to ECM harness connector page 01
-
255
.
- Check wiring for open or short circuit between ECM and instrument
cluster, using wiring diagram.
Pa
ge 33 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25

Control module coding OK page 01
-247
.

Checking

- Switch ignition OFF.

- Connect VAG 1598/19 test box to ECM harness
connector page 01
-255
.

- Check signal wire for open or short circuit
between ECM and ABS control module, using
wiring diagram.
Pa
ge 35 of 37 Auxiliar
y in
put si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.25