How to Use This Manual
Safety Warnings and Symbols
You will find a number of safety cautions
in this book. We use a box with a gray
background and the word CAUTION to
tell you about things that could hurt you if
you were to ignore the warning.
In the gray caution area, we tell you what
the hazard is. Then we tell you what to do
to help avoid or reduce the hazard. Please
read these cautions. If you don’t, you or
others could be. hurt. You
will also find a circle with a slash
through it in this book. This safety symba
means “Don’t,’’ “Don’t do this,’’ or “Don’
let this happen.”
NOTICE:
These mean there is something that
could damage your vehicle.
Vehicle Damage Warnings
Also, in this book you will find these
notices.
In the notice area, we tell you about
something that can damage your vehicle.
Many times, this damage would not be
covered by your warranty, and it could be
costly. But the notice will tell you what to
do to help avoid the .damage.
When you read other manuals, you might see CAUTION and NOTICE warnings in
different colors
or in different words.
You’ll also see warning labels on your
vehicle. They use yellow for cautions, blue
for notices and the words CAUTION or
NOTICE.
... 4
ProCarManuals.com
Features and Controls
A green arrow on the instrument panel
will flash in the direction of the turn or
lane change.
To signal a lane change, just raise or
lower the lever until the green arrow start
to flash. Hold it there until you complete
your lane change. The lever will return b!
itself when you release it.
As you signal a turn or a lane change, if
the arrows don’t flash but just stay on, a
signal bulb may be burned out and other
drivers won’t see your turn signal.
If a bulb is burned out, replace it to help
avoid an accident. If the green arrows
don’t go on at all when you signal a turn,
check the fuse (see “Fuses” in the Index)
and for burned-out bulbs.
feadlight High/Low Beam
’0 change the headlights from low beam
3 high or high to low, pull the turn signal
:ver all the way toward you. Then
:lease it. When the high beams are on,
lis blue light on the instrument panel
lso will be on.
Windshield Wipers
fou control the windshield wipers by
urning the band
with the wiper symbol
In it.
;or a single wiping cycle, turn the band to
‘MIST.” Hold it there until the wipers
;tart, then let go. The wipers will stop
ifter one cycle. If
you want more cycles,
lold the band on “MIST” longer.
You can set the wiper speed for a long or
;hort delay between wipes. This can be
iery useful in light rain or snow. Turn the
>and to choose the delay time. The closer
:o “LO,” the shorter the delay.
... 70
ProCarManuals.com
