Reverse
Press “REV” to rapidly rewind the tape.
Press “PROG’ or “REV” again to stop it.
The radio will play during this operation.
To Play the Next Selection
Press “NEXT” or “SEEK A’’ to hear the
next selection (instead of waiting until the
current selection is finished.)
For “NEXT” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
To Replay the Current Selection
Press “PREV” or “SEEK V” to play a
selection again.
For “PREV” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
Program
Press “PROG’ to switch from one side of
the tape to the other or to stop the tape
from searching.
Noise Reduction
Press 00 to reduce tape noise. This
symbol will appear in the display.
To Stop the Tape Player
Turn the power off or turn the ignition
key off. The cassette stays in
the
player and will resume playing at the
point where it stopped.
cassette and switch to the radio. Press
“TAPE-PLAY’’ to restart
the cassette
at
the point where it stopped.
e Press “EJECT” to remove the cassette
or stop the cassette and switch to
radio. “EJECT” will work with the
ignition or radio off. Press “EJECT”
to load a cassette when the radio is
off.
0 Press “AMEM” to stop playing the
NOTE: This radio has a “broken tape”
feature that will eject broken or misfed
tapes. Because of this feature, CD:
changers that plug into
the tape deck
will not work in this system.
Theft-Deterrent System
Your audio system is equipped with the
“THEFTLOCK’ theft-deterrent system.
See “Theft-Deterrent System” at the end
of this section.
111 . . .
ProCarManuals.com
Comfort Controls and Audio Systems
For “PREV” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
Program
Press “PROG” to switch from one side of
the tape to the other or to stop the tape
from searching.
Noise Reduction
Press 00 to reduce tape noise. This
symbol will appear in the display.
To Stop the Tape Player
0 Turn the power off or turn the ignition
key
off. The cassette stays in the
player and will resume playing at the
point where it stopped.
Press “AM/FM’ to stop playing the
cassette and switch to the radio. Press
“TAPE-PLAY” to restart the cassette
at
the point where it stopped.
Press “EJECT” to remove the cassette
or stop the cassette and switch to
radio. “EJECT” will work with the
ignition or radio
off. Press “EJECT”
to load a cassette when the radio
is
Off.
NOTE: This radio has a “broken tape”
feature that will eject broken or misfed
tapes. Because of this feature, CD
changers that plug into
the tape deck
will not work
in this system.
Theft-Deterrent System
Your audio system is equipped with the
“THEFTLOCK” theft-deterrent system.
See “Theft-Deterrent System” at the end
of this section.
. . .I14
ProCarManuals.com
